콘크리트 충전형 비좌굴 가새의 부재성능에 관한 실험적 평가 = Experimental Evaluation of the Concrete-filled Buckling-Restrained Braces Component Capacity

다국어 초록 (Multilingual Abstract)

Unlike other general braces, the buckling-restrained brace causes the inelastic transformation of its central-steel-frame materials, instead of global or local buckling, when it receives a large seismic load. Moreover, it demonstrates sufficient ductile movement, releases a large amount of energy, and shows stable hysteresis movement. It is thus a very efficient system for seismic loads, which explains why it currently stands out among its competitors overseas. However, domestically, it is only beginning to be studied, and only one experiment has been performed on it thus far. It must be subjected to more experiments, and more analytical studies about it must be conducted. The buckling-restrained brace consists of core materials that will support the load, constraining materials that will restrain buckling when the core materials begin to buckle, and unbonding materials that will prevent the core materials from adhering to the reinforced materials. In this paper, a new type of buckling-restrained brace is proposed, and the results of an experiment that was conducted on the aforementioned materials using the loading protocol proposed in the AISC standards are presented. The experiment variables were the sizes of the core materials, the use of high-strength steel materials and general steel materials, and the existence of reinforcement. The results of the experiment were analyzed to prove the efficiency of the buckling-restrained brace. In particular, the brace’s buckling restraint capacity for pressed loads, ductility level, and energy-dissipation capacity were reviewed.

참고문헌 (Reference)

1 권기혁, "철근 콘크리트 외부 보-기둥 접합부 실물크기실험체의 이력거동에 관한 실험적 연구" 대한건축학회 19 (19): 19-26, 2003

2 권순호, "비좌굴 가새의 부재성능에 관한 실험적 평가" 대한건축학회 22 (22): 29-38, 2006

3 최성모, "복합십자형 CFT 각형 기둥-보 접합부의 내진성능 개선에 관한 실험적 연구" 대한건축학회 21 (21): 19-26, 2005

4 대한건축학회, "강구조 한계상태 설계기준 및 해설" 기문당 1998

5 Stive M., "Subassemblage Testing of Corebrace Buckling Restrained Braces" LLC 2003

6 Tetsu U., "Strength of H-Shaped Brace Constrained Flexural Buckling Having Unconstrained Area at Both Ends(Both ends simply supported)" (542) : 171-177, 2001

7 AISC, "Seismic Provisions for Structural Steel Buildings, Draft"

8 AISC, "Seismic Provisions for Structural Steel Buildings"

9 Sabelli, R., "Seismic Demands on Steel Braced Frame Buildings with Buckling-Restrained Braces" 25 (25): 655-666, 2003

10 Chia-Ming U., "Research and Application of Buckling-Restrained Braced Frames" 4 : 310-313, 2004

11 SEAOC-AISC, "Recommended provisions for buckling -restrained braced frames"

12 Sabelli, R., "Recommended Provisions for Buckling- Restrained Braced Frames" AISC 155-175, 2004

13 Chen, C. C., "Recent Advances of Seismic Design of Steel Buildings In Taiwan" 15 (15): 2002

14 Tsai, K. C., "Pseudo Dynamic Tests of a Full Scale CFT/BRB Composite Frame" ASCE 2004

15 Akira WADA, "From Infancy to Maturity of Buckling Restrained Braces Research" 2004

16 Sabelli, R., "Design of Buckling -Restrained Braced Frames"

17 Black C, "Component testing, stability analysis and characteri zation of buckling restrained braces" Nippon Steel Corporation 2001

18 Inoue, K., "Bracing design criterion of the reinforced concrete panel including unbonded steel diagonal brace" 1992

19 Chen, C. C., "Application of low yield strength steel on controlled plastification ductile concentrically braced frames" 2001