적외선 센서를 이용한 초음파 용착부의 마찰열 측정

다국어 초록 (Multilingual Abstract)

During ultrasonic welding, plastic deformation, elastic hysteresis, and friction generate heat at the contact portions of the two materials to be welded, theoretically analyzing and experimentally measuring the temperature at the welded part are very important for identifying the heat affected zone. However, the welding temperature during ultrasonic welding wherein welding is performed in less than a second is a challenge. We investigated the effects of welding conditions such as welding time, welding pressure, and the ultrasonic vibration amplitude of horns on the temperature of welded surface of a Ni sheet of thickness 0.1 mm. We used a horn with a resonance frequency of 40 kHz and an ultrasonic welder. The temperature was measured using a intrared sensor, and its characteristics were investigated. Experimental results showed that increase in welding time and pressure and ultrasonic vibration amplitude of horns generally caused the increase in surface temperature of the weld.

참고문헌 (Reference)

1 김은미, "초음파 금속 용착을 위한 반파장 혼의 설계 및 제작" 한국생산제조학회 19 (19): 790-796, 2010

2 장호수, "초음파 금속 용착용 40kHz 혼의 설계와 용착성 평가" 한국기계가공학회 12 (12): 55-61, 2013

3 장호수, "초음파 금속 용착기를 이용한 Cu 박판의 용착성 실험" 한국생산제조학회 20 (20): 570-575, 2011

4 Park, W. Y, "Ultrasonic Horn Design and Weldability in Thin Ni Plates Welding" 941-944 : 2053-2057, 2014

5 Elangovan, S, "Temperature and stress distribution in ultrasonic metal welding—An FEA-based study" 209 : 1143-1150, 2009

6 Elangovan, S, "Optimization of Ultrasonic Welding Parameters for Copper to Copper Joints using Design of Experiments" 51 : 163-171, 2010

7 Edgar, D. V., "Mechanics and Mechanisms of Ultrasonic Metal welding" The Ohio State University 2004

8 Kim, J. H., "KISTI Market Report" KISTI 2013

9 강은지, "FEM을 이용한 초음파 용착부의 온도분포 해석" 한국생산제조학회 25 (25): 105-111, 2016

10 Kim, J. H., "Design and Analysis of 20kHz Ultrasonic Metal Welding" 127-, 2013