3차원 격자요소를 활용한 콘크리트 구조부재의 스트럿-타이 모델 설계 방법 - (I) 방법의 제안 = Strut-Tie Model Approach Associated with 3-Dimensional Grid Elements for Design of Structural Concrete - (I) Proposal of Approach

국문 초록 (Abstract)

스트럿-타이 모델 방법은 응력교란영역을 갖는 콘크리트 구조부재의 설계에 효과적이다. 그러나 현행 설계기준의 스트럿-타이 모델 방법은 3차원 응력교란영역을 갖는 콘크리트 구조부재의 설계에 관한 명확한 개념 및 기준을 제시하지 못하고 있다. 이 연구에서는 현행 설계기준의 문제점을 개선하기 위한 새로운 스트럿-타이 모델 설계 방법을 제안하였다. 제안한 방법에서는 스트럿-타이 모델을 한 절점에서 주변의 인접한 모든 절점들로 힘을 전달할 수 있는 3차원 기본격자요소를 활용하여 형성한다. 또한 콘크리트 스트럿 및 절점영역의 유효강도를 이들이 위치한 곳의 철근의 영향 및 3차원 응력상태를 고려할 수 있는 수치해석적 방법을 사용하여 결정한다. 뿐 만 아니라 스트럿 및 타이의 하중전달능력을 격자요소의 최대단면적 개념을 도입하여 검토한다.

다국어 초록 (Multilingual Abstract)

Although the strut-tie model approaches of current design codes are regarded as the valuable methods for designs of structural concretes with D-regions, the approaches have to be improved because of the uncertainties in terms of the concepts and provisions for designs of 3-dimensional structural concretes. To improve the uncertainties, a new strut-tie model approach is proposed in this study. In the proposed approach, the concepts of employing a 3-dimensional grid element allowing load transfers in all directions at a node to construct a strut-tie model, a numerical analysis approach to determine the effective strengths of concrete struts and nodal zones by reflecting the effects of reinforcing bars and 3-dimensional stress state, and maximum areas of struts and ties to examine their load carrying capacities are integrated into the strut-tie model approaches of current design codes.

참고문헌 (Reference)

1 박홍근, "할선강성을 이용한 직접 비탄성 스트럿-타이 모델" 한국콘크리트학회 17 (17): 201-212, 2005

2 윤영묵, "스트럿-타이 모델에서 콘크리트 스트럿의 유효강도 (I): 결정방법의 소개" 대한토목학회 25 (25): 49-59, 2005

3 Lee, W. S., "Strut-tie model approach using evolutionary structural optimization for reinforced concrete structural members" Kyungpook National University 2007

4 Hong, S. G., "Strut-and-tie models and failure mechanisms for bar development in tension-tension-compression nodal zone" 97 (97): 111-121, 2000

5 Leu, L. J., "Strut-and-tie design methodology for three-dimensional reinforced concrete structures" 132 (132): 929-938, 2006

6 Yun, Y. M., "Strength of two-dimensional nodal zones in Strut-Tie models" ASCE 132 (132): 1764-1783, 2006

7 Yun, Y. M., "Strength of struts and nodes in strut-tie model" ASCE 122 (122): 20-29, 1996

8 Hwang, S. J., "Shear strength prediction for deep beams" 97 (97): 367-376, 2000

9 MacGregor J. G., "Reinforced concrete:Mechanics and Design" Pearson Prentice Hall 2005

10 MacGregor, J. G., "Reinforced concrete - Mechanics and Design" Prentice Hall 1997

11 Liang, Q. Q., "Performance-based optimization for strut-and-tie modeling of structural concrete" 128 (128): 815-823, 2002

12 Yun, Y. M., "Nonlinear strut-tie model approach for structural concrete" 97 (97): 581-590, 2000

13 Bakir, P. G., "Mechanical behaviour and non-linear analysis of short beams using softened truss and direct strut & tie models" 27 (27): 639-651, 2005

14 Liang, Q. Q., "Generating optimal strut-and-tie models in prestressed concrete beams by performance-based optimization" 98 (98): 226-232, 2001

15 Foster, S. J., "Experimental studies on highstrength concrete deep beams" 95 (95): 382-390, 1998

16 American Concrete Institute, "Examples for the design for structural concrete with strut-and-tie models; SP-208" 2002

17 Ha, T. H., "Effect of diagonal cracking on the strength of concrete strut in RC members" 17 (17): 383-386, 2005

18 Kwak, H. G., "Determination of strut-and-tie models using evolutionary structural optimization" 28 (28): 1440-1449, 2006

19 Bergmeister, K., "Detailing in structural concrete" University of Texas at Austin 1993

20 Korean Concrete Institute, "Design specifications for structural concrete" Kimoondang 2012

21 Canadian Standards Association, "Design of concrete structures for buildings"

22 Willam, K. J., "Constitutive model for the triaxial behavior of concrete" 19 : 1-30, 1974

23 Tjhin, T. N., "Computer-based tools for design by strut-and-tie method: Advances and Challenges" 99 (99): 586-594, 2002

24 Comite Euro-International du Beton, "CEP-FIP model code 2010"

25 American Concrete Institute, "Building code requirements for structural concrete (ACI 318M-11) and commentary" Farmington Hills 2011

26 Ali, M. A., "Automatic generation of truss model for optimal design of reinforced concrete structures" 98 (98): 431-442, 2001

27 Alshegeir, A., "Analysis and design of disturbed regions with strut-tie models" School of Civil Engineering, Purdue University 1992

28 Kim, B. H., "An indeterminate strut-tie model and load distribution ratio for RC deep beams - (I) Model & Load Distribution Ratio" 14 (14): 1031-1042, 2011

29 American Association of State Highway and Transportation Officials, "AASHTO LRFD bridge design specifications" 2010

30 Yun Y. M., "A 2-Dimensional grid strut-tie model approach for structural concrete" ASCE 134 (134): 1199-1214, 2008