마이크로 엔드밀링시 공구 변형이 가공오차에 미치는 영향에 관한 연구 = A Study of Machining Error Due to Tool Deflection in Micro Endmilling

다국어 초록 (Multilingual Abstract)

Micro end-milling has been becoming an important machining process to manufacture a number of small products such as micro-devices, bio-chips, micro-patterns and so on. Many related researches have given grand effects to micro end-milling phenomenon, for example, micro end-milling mechanism, cutting force modeling and machinability. This paper strongly concerned actual problem, micro tool deflection, which causes excessive machining errors on the workpiece. Machining error were predicted and measured through a series of test micro cutting and analysis of their SEM images and FEM analysis. Experiments are carried out to validate the approaches.

참고문헌 (Reference)

1 Kline, W. A, "The prediction of Cutting Forces in End Milling with Application to Cornering Cuts" 22 (22): 7-22, 1982

2 Seo, T. I, "Study of Machined Surface Error Compensation for Autonomous Manufacturing" 9 (9): 75-84, 2000

3 Donfeld, D, "Recent Advances in Mechanical Micromachining" 55 (55): 745-768, 2006

4 Michael P. Vogler, "On the Modeling and Analysis of Machining Performance in Micro-Endmilling Part I:Surface Generation" 126 : 685-694, 2004

5 Chae, J, "Investigation of micro-cutting operation" 46 : 313-332, 2006

6 Uhlmann, E, "Dynamic Load and Strain Analysis for the Optimization of Micro End Mills" 54 (54): 75-78, 2005

7 Sabberwal, A. J. P, "Chip Section and Cutting force during the Milling Operation" 10 (10): 197-203, 1961

8 Hascoét J. Y, "A Study on the Compensation of Milling Errors by Regenerating of Tool Trajectory" 15 (15): 137-144, 1998