Numerical study on the deflections of steel-concrete composite beams with partial interaction

다국어 초록 (Multilingual Abstract)

The use of composite beams with partial interaction, with less shear connectors than those required for full interaction, may be advantageous in many situations. However, these beams tend to show higher deflections compared to beams with full interaction, and codified expressions for the calculation of such deflections are not fully developed and validated. Thus, this paper presents a comprehensive numerical study on the deflections of steel-concrete composite beams with partial interaction. Efficient numerical models of full-scale composite beams considering material nonlinearities and contact between their parts have been developed by means of the advanced software ABAQUS, including a damage model to simulate the concrete slab. The FE models were validated against experimental results, and subsequently parametric studies were developed to investigate the influence of the shear connection degree and the coefficient of friction in the deflection of composite beams. The comparison of predicted deflections using reference codes (AISC, Eurocode-4 and AS-2327.1) against numerical results showed that there are still inaccuracies in the estimation of deflections for the verification of the serviceability limit state, according to some of the analyzed codes.

참고문헌 (Reference)

1 Luciano M. Bezerra, "V-shaped shear connector for composite steel-concrete beam" Elsevier BV 150 : 162-174, 2018

2 ABAQUS, "User’s Manual, Version 6.14-1" Dassault Systèmes Simulia Corp 2014

3 Qing Quan Liang, "Ultimate strength of continuous composite beams in combined bending and shear" Elsevier BV 60 (60): 1109-1128, 2004

4 김상효, "Ultimate strength of composite structure with different degrees of shear connection" 국제구조공학회 11 (11): 375-390, 2011

5 N. Anandavalli, "Three Dimensional FE Model of Stud Connected Steel-Concrete Composite Girders Subjected to Monotonic Loading" Scientific and Academic Publishing 1 (1): 1-11, 2012

6 ABAQUS, "Theory manual, Version 6.14-1" Dassault Systèmes Simulia Corp 2014

7 Xiaoqing Xu, "Study on mechanical behavior of rubber-sleeved studs for steel and concrete composite structures" Elsevier BV 53 : 533-546, 2014

8 Xiang Yun, "Stress-strain curves for hot-rolled steels" Elsevier BV 133 : 36-46, 2017

9 Lyons, J. C., "Strength of Welded Shear Studs" 1994

10 Qing Quan Liang, "Strength Analysis of Steel–Concrete Composite Beams in Combined Bending and Shear" American Society of Civil Engineers (ASCE) 131 (131): 1593-1600, 2005

11 Dongyan Xue, "Static behavior of multi-stud shear connectors for steel-concrete composite bridge" Elsevier BV 74 : 1-7, 2012

12 Chang-Su Shim, "Static behavior of large stud shear connectors" Elsevier BV 26 (26): 1853-1860, 2004

13 Pil-Goo Lee, "Static and fatigue behavior of large stud shear connectors for steel–concrete composite bridges" Elsevier BV 61 (61): 1270-1285, 2005

14 Weichen Xue, "Static Behavior and Theoretical Model of Stud Shear Connectors" American Society of Civil Engineers (ASCE) 13 (13): 623-634, 2008

15 Jorge Bonilla, "Review of stud shear resistance prediction in steel-concrete composite beams" 국제구조공학회 27 (27): 355-370, 2018

16 Jorge Bonilla, "Resistance of stud shear connectors in composite beams using profiled steel sheeting" Elsevier BV 187 : 478-489, 2019

17 Ban, H.Y., "Research progress on the mechanical property of high strength structural steel" 250-253 (250-253): 640-648, 2011

18 Li An, "Push-out tests on studs in high strength and normal strength concrete" Elsevier BV 36 (36): 15-29, 1996

19 Faham Tahmasebinia, "Probabilistic three-dimensional finite element study on composite beams with steel trapezoidal decking" Elsevier BV 80 : 394-411, 2013

20 Jeeho Lee, "Plastic-Damage Model for Cyclic Loading of Concrete Structures" American Society of Civil Engineers (ASCE) 124 (124): 892-900, 1998

21 Ehab Ellobody, "Performance of shear connection in composite beams with profiled steel sheeting" Elsevier BV 62 (62): 682-694, 2006

22 Johnson, R. P., "Partial-interaction design of composite beams" 53 (53): 305-311, 1975

23 Yuchen Song, "Numerical analysis of stainless steel-concrete composite beam-to-column joints with bolted flush endplates" 국제구조공학회 33 (33): 143-162, 2019

24 M. Reza Salari, "Nonlinear Analysis of Composite Beams with Deformable Shear Connectors" American Society of Civil Engineers (ASCE) 124 (124): 1148-1158, 1998

25 Andrea Dall’Asta, "Non-linear analysis of composite beams by a displacement approach" Elsevier BV 80 (80): 2217-2228, 2002

26 B. Alfarah, "New methodology for calculating damage variables evolution in Plastic Damage Model for RC structures" Elsevier BV 132 : 70-86, 2017

27 J. Turmo, "Modeling composite beams with partial interaction" Elsevier BV 114 : 380-393, 2015

28 CEB-FIP, "Model Code 2010"

29 Huiyong Ban, "Flexural behaviour of composite beams with high strength steel" Elsevier BV 56 : 1130-1141, 2013

30 Huu Thanh Nguyen, "Finite element modeling of push-out tests for large stud shear connectors" Elsevier BV 65 (65): 1909-1920, 2009

31 Chapman, J. C., "Experiments on Composite Beams" 42 (42): 369-383, 1964

32 Jianguo Nie, "Experimental study of partially shear-connected composite beams with profiled sheeting" Elsevier BV 30 (30): 1-12, 2008

33 Cornelissen, H., "Experimental determination of crack softening characteristics of normal weight and lightweight concrete" 31 (31): 45-56, 1986

34 Ying Xing, "Experimental and numerical study on static behavior of elastic concrete-steel composite beams" Elsevier BV 123 : 79-92, 2016

35 "Eurocode-4 ENV1994-1-1:1992 - Design of composite steel and concrete structures - Part 1-1: General rules for buildings"

36 "Eurocode-4 EN1994-1-1:2004 - Design of Composite Steel and Concrete Structures Part 1.1"

37 Gilson Queiroz, "Estimation of friction contribution in the behavior of steel-concrete composite beams with flexible shear connectors" FapUNIFESP (SciELO) 67 (67): 253-258, 2014

38 O. Mirza, "Effects of the combination of axial and shear loading on the behaviour of headed stud steel anchors" Elsevier BV 32 (32): 93-105, 2010

39 Deric J. Oehlers, "Effect of Friction on Shear Connection in Composite Bridge Beams" American Society of Civil Engineers (ASCE) 5 (5): 91-98, 2000

40 Y. C. Wang, "Deflection of Steel-Concrete Composite Beams with Partial Shear Interaction" American Society of Civil Engineers (ASCE) 124 (124): 1159-1165, 1998

41 Byron J. Daniels, "Composite Slab Behavior and Strength Analysis. Part I: Calculation Procedure" American Society of Civil Engineers (ASCE) 119 (119): 16-35, 1993

42 Mark Andrew Bradford, "Composite Beams with Partial Interaction under Sustained Loads" American Society of Civil Engineers (ASCE) 118 (118): 1871-1883, 1992

43 Marko Pavlović, "Bolted shear connectors vs. headed studs behaviour in push-out tests" Elsevier BV 88 : 134-149, 2013

44 B. S. Jayas, "Behaviour of headed studs in composite beams: push-out tests" Canadian Science Publishing 15 (15): 240-253, 1988

45 Jawed Qureshi, "Behaviour of Headed Shear Stud in Composite Beams with Profiled Metal Decking" SAGE Publications 15 (15): 1547-1558, 2012

46 엄순섭, "Behavior of composite CFST beam-steel column joints" 국제구조공학회 32 (32): 583-594, 2019

47 Dennis Lam, "Behavior of Headed Stud Shear Connectors in Composite Beam" American Society of Civil Engineers (ASCE) 131 (131): 96-107, 2005

48 Rambo-Roddenberry, M. D., "Behavior and Strength of Welded Stud Shear Connectors" University of Blacksburg 2002

49 Huiyong Ban, "Available rotation capacity of composite beams with high-strength materials under sagging moment" Elsevier BV 118 : 156-168, 2016

50 "AS-2327.1 Composite Structures Part 1: Simply supported beams"

51 "ANSI/AISC 360-10 - Specification for Structural Steel Buildings"

52 "ANSI/AISC 360-05 - Specification for Structural Steel Buildings"

53 J. Lubliner, "A plastic-damage model for concrete" Elsevier BV 25 (25): 299-326, 1989