RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      KCI등재

      친환경고화재와 탄소섬유 보강토의 일축압축강도 특성 = Unconfined Compressive Strength Characteristics of Eco-Friendly Stabilizers and Carbon Fiber Reinforced Soil

      한글로보기

      https://www.riss.kr/link?id=A109160685

      • 0

        상세조회
      • 0

        다운로드
      서지정보 열기
      • 내보내기
      • 내책장담기
      • 공유하기
      • 오류접수

      부가정보

      국문 초록 (Abstract)

      본 연구에서는 풍화토 비탈면에서 발생하는 세굴 및 표층 붕괴 면의 표층 보강을 목적으로 탄소섬유와 친환경고화재(E.S.B.)를 혼합하여 일축 압축강도 시험을 수행하였다. E.S.B.와 탄소섬유...

      본 연구에서는 풍화토 비탈면에서 발생하는 세굴 및 표층 붕괴 면의 표층 보강을 목적으로 탄소섬유와 친환경고화재(E.S.B.)를 혼합하여 일축 압축강도 시험을 수행하였다. E.S.B.와 탄소섬유의 최적 배합비를 결정하기 위해 E.S.B.는 10%, 20%, 30%의 조건을 설정하였고, 탄소섬유는 0.3%, 0.6%, 0.9%, 1.2%로 설정하였다. 또한, 건조밀도 및 재령 기간에 따른 일축 압축강도 변화를 분석하기 위해 최대건조단위 중량의 85%, 95%를 적용하고 재령 기간 3일, 7일, 28일로 설정하였다. 비탈면 표층 보강을 위한 기준 강도는 ACI 230.1R-09(2009)에서 7일 기준 4MPa, 28일 기준 6MPa로 제안하고 있다. 압축시험 결과 E.S.B. 보강토의 일축 압축강도는 다짐도 95%인 경우 E.S.B. 혼합비율 10% 이상에서 기준 강도를 충족하는 것을 알 수 있다. 또한, 친환경고화재(E.S.B.) 보강토에 탄소섬유를 혼합한 결과 일축 압축강도에 의한 항복점 이후 탄소섬유를 혼합한 조건에서 연성 형태의 파괴 형상이 나타나 항복 이후 발생하는 전도에 대하여 보완할 수 있으며, 탄소섬유 0.6% 혼합비율에서 최대강도를 발현하는 것으로 분석되었다. 탄소섬유 보강토는 탄소섬유를 혼합하지 않은 조건과 비교하여 일축 압축강도가 약 54~70%의 강도증가율이 나타났다.

      더보기

      다국어 초록 (Multilingual Abstract)

      In this study, to reinforce the surface layer of weathered soil slopes where erosion and collapse of surface layer occur, compression strength tests were conducted by mixing carbon fiber and eco-friendly stabilizer (E.S.B.) To determine the optimal mi...

      In this study, to reinforce the surface layer of weathered soil slopes where erosion and collapse of surface layer occur, compression strength tests were conducted by mixing carbon fiber and eco-friendly stabilizer (E.S.B.) To determine the optimal mixing ratio of E.S.B. and carbon fiber, E.S.B. was set at conditions of 10%, 20%, and 30%, and carbon fiber at 0.3%, 0.6%, 0.9%, and 1.2%. Additionally, to analyze the changes in compressive strength according to dry density and curing period, 85% and 95% of the maximum dry unit weight were applied, and curing periods were set to 3 days, 7 days, and 28 days. The standard strength for surface layer reinforcement of slopes is proposed as 4 MPa at 7 days and 6 MPa at 28 days according to ACI 230.1R-09 (2009). The compression test results showed that the unconfined compressive strength of E.S.B. reinforced soil met the standard strength at an E.S.B. mixing ratio of 10% or more for 95% compaction. Moreover, when carbon fiber was mixed with E.S.B. reinforced soil, a ductile fracture pattern was observed after the yield point due to compressive strength, indicating that the mixture could compensate for post-yield failure. It was analyzed that the maximum strength is exhibited at a carbon fiber mixing ratio of 0.6%. The unconfined compressive strength of carbon fiber reinforced soil increases by approximately 54-70% compared to the condition without carbon fiber.

      더보기

      동일학술지(권/호) 다른 논문

      분석정보

      View

      상세정보조회

      0

      Usage

      원문다운로드

      0

      대출신청

      0

      복사신청

      0

      EDDS신청

      0

      동일 주제 내 활용도 TOP

      더보기

      주제

      연도별 연구동향

      연도별 활용동향

      연관논문

      연구자 네트워크맵

      공동연구자 (7)

      유사연구자 (20) 활용도상위20명

      이 자료와 함께 이용한 RISS 자료

      나만을 위한 추천자료

      해외이동버튼