Effect of Sintering Temperature on the Physico‑Mechanical Behavior of SiC Reinforced Zinc‑Magnesium Based Composite

다국어 초록 (Multilingual Abstract)

The present research work deals with study the effect of sintering temperature on the physical and mechanical behavior ofZn2Mg6SiCcomposite, which can be used as a biodegradable implant. Sintering of the composite has been done at a temperatureof 430 °C, 450 °C, 470 °C and 490 °C. The mechanical and physical properties of the samples have been observedto vary with sintering temperature. The grain size of the samples has observed to be optimized at 450 °C with grain size0.2587 μm and provides maximum strength to the samples. The densification of the composites achieved was found to bemaximum at 450 °C having a value 90.30%. Wear rate, hardness, Young’s Modulus of elasticity and flexural strength wereobserved to be maximum at this temperature. Scanning electron microscopy and X-ray diffraction spectroscopy of the samplesat various temperatures were done to find microstructural changes and surface morphology of the composite.

참고문헌 (Reference)

1 J. Kubásek, "Zn-based alloys as alternative biodegradable materials" 2012

2 G. J. Fosmire, "Zinc toxicity" 51 : 225-227, 1990

3 P. K. Bowen, "Zinc exhibits ideal physiological corrosion behavior for bioabsorbable stents" 25 : 2577-2582, 2013

4 J. Nriagu, "Zinc defciency in human health BT" 2011

5 M. Hambidge, "Zinc and health: current status and future directions" 130 : 1344S-1349S, 2000

6 A. S. Prasad, "Zinc : an antioxidant and anti-infammatory agent : role of zinc in degenerative disorders of aging" 28 : 364-371, 2014

7 J. Rho, "Young’s modulus of trabecular and cortical bone material" 26 : 111-119, 1993

8 B. K. Prasad, "Wear Response of a Zn-Base Alloy in the Presence of SiC Particle Reinforcement: A Comparative Study with a Copper-Base Alloy" Springer Science and Business Media LLC 8 (8): 693-700, 1999

9 D. W. Budworth, "The selection of grain-growth control additives for the sintering of ceramic" 37 : 833-838, 1970

10 T. M. Bray, "The physiological role of zinc as an antioxidant" 8 : 281-291, 1990

11 L. M. Plum, "The essential toxin : impact of zinc on human health" 7 : 1342-1365, 2010

12 Q. Wang, "The effect of sintering temperature on the structure and degradability of strontium-doped calcium polyphosphate bioceramic" 54 : 97-102, 2010

13 C. P. Ling, "The effect of fabrication techniques on the properties of A1–SiC composites" 48 : 325-331, 1995

14 Rasmus Bjørk, "The Effect of Particle Size Distributions on the Microstructural Evolution During Sintering" Wiley 96 (96): 103-110, 2013

15 A. Nouri, "Surfactants in mechanical alloying/milling: a catch-22 situation" 39 : 81-108, 2014

16 M. R. Ghomashchi, "Squeeze casting : an overview" 101 : 1-9, 2000

17 N. Saheb, "Spark plasma sintering of metals and metal matrix nanocomposites : a review" 18 : 1-13, 2012

18 T. Hungría, "Spark plasma sintering as a useful technique to the nanostructuration of piezo-ferroelectric materials" 11 : 615-631, 2009

19 C. H. Ji, "Sintering study of 316L stainless steel metal injection molding parts using Taguchi method : fnal density" 311 : 74-82, 2001

20 S. Zhang, "Research on an Mg–Zn alloy as a degradable biomaterial" 6 : 626-640, 2010

21 J. W. Kaczmar, "Production and application of metal matrix composite materials" 106 : 58-67, 2000

22 D. J. Veljovic, "Processing of dense nanostructured HA ceramics by sintering and hot pressing" 35 : 1407-1413, 2009

23 G. Shibo, "Powder injection molding of Ti–6Al–4 V alloy" 173 : 310-314, 2006

24 J. Cortés, "Phenomenological equations of the kinetics of heterogeneous adsorption with interaction between adsorbed molecules" 51 : 2621-2623, 1995

25 T. Kehoe, "Nano-scale effects on Young’s modulus of nano imprint polymers measured by photoacoustic metrology" 214 : 11-16, 2010

26 K. Krishnan, "Modeling the accelerated cyclic annealing kinetics" 100 : 093505-, 2006

27 Y. Boonyongmaneerat, "Mechanical properties of partially sintered materials" 452 : 773-780, 2007

28 A. Gökçe, "Mechanical and physical properties of sintered aluminum powders" 30 : 157-164, 2008

29 D. Vojtěch, "Mechanical and corrosion properties of newly developed biodegradable Zn-based alloys for bone fixation" Elsevier BV 7 (7): 3515-3522, 2011

30 J. C. Wurst, "Lineal intercept technique for measuring grain size in two-phase polycrystalline ceramics" 55 : 109-111, 1972

31 Z. G. Huan, "In vitro degradation behavior and cyto compatibility of Mg–Zn–Zr alloys" 21 : 2623-2635, 2010

32 E. Reuf, "Evaluation of modulus of elasticity by nondestructive method of hybrid fber reinforced concrete" 3 : 1-4, 2016

33 S. C. Sharma, "Equation for the density of particle-reinforced metal matrix composites : a new approach" 12 : 324-330, 2003

34 Hana Naceur, "Effect of sintering temperature on microstructure and electrical properties of Sr1−x(Na0.5Bi0.5) x Bi2Nb2O9 solid solutions" Springer Science and Business Media LLC 3 (3): 17-30, 2014

35 S. E. Shirsath, "Effect of sintering temperature and the particle size on the structural and magnetic properties of nano crystalline Li0.5Fe2.5O4" 323 : 3104-3108, 2011

36 C. R. K. Mohan, "Effect of sintering optimization on the electrical properties of bulk axSr1xTiO3 ceramics" 403 : 2173-2188, 2008

37 S. Ahn, "Effect of powders and binders on material properties and molding parameters in iron and stainless steel powder injection molding process" 193 : 162-169, 2009

38 L. Hallmann, "Effect of dopants and sintering temperature on microstructure and low temperature degradation of dental Y-TZP-zirconia" 32 : 4091-4104, 2012

39 N. J. Shaw, "Densifcation and coarsening during solid state sintering of ceramics : a review of the models III" 21 : 25-29, 1989

40 F. Witte, "Degradable biomaterials based on magnesium corrosion" 12 : 63-72, 2008

41 N. S. Murni, "Cytotoxicity evaluation of biodegradable Zn–3 Mg alloy toward normal human osteoblast cells" 49 : 560-566, 2015

42 J. A. Floro, "Competition between strain and interface energy during epitaxial grain growth in Ag flms on Ni(001)" 9 : 2411-2424, 1994

43 K. Yamaguchi, "Compaction and sintering characteristics of composite metal powders" 63 : 364-369, 1997

44 Z. Y. Liu, "Characterization of powder injection molding feedstock" 49 : 313-320, 2002

45 H. H. Rieke, "Chapter 2 Interrelationships among density, porosity, remaining moisture content, pressure and depth" 16 : 31-86, 1974

46 I. V. Kraghelsky, "Calculation of wear rate" 87 : 785-, 1965

47 M. B. Kannan, "Biocompatibility and biodegradation studies of a commercial zinc alloy for temporary mini-implant applications" 7 : 1-11, 2017

48 D. E. Garcia, "Advanced ceramics with dense and fne-grained microstructures through fast fring" 30 : 273-281, 2012

49 "ASTM E3484-99 A. Standard Test Method for Micro Indentation Hardness Of Materials"

50 "ASTM C1674-11 Standard Test Method For Flexural Strength Of Advanced Ceramics With Engineered Porosity (Honeycomb CellularChannels) At Ambient Temperatures"