충돌제트의 경사각도가 파형 구조의 열유동 특성에 미치는 영향

다국어 초록 (Multilingual Abstract)

A numerical analysis is made of the fluid flow and heat transfer characteristics in the corrugated structure that traps the spent air in the corrugations between impinging jets to reduce crossflow effects on downstream jets in the array. All computations are performed by considering three-dimensional, steady state, and incompressible flow by using the ANSYS-CFX 15.0 code. Averaged jet Reynolds number is 10,000. The oblique angles of impingement jets on the spanwise section are 70°, 80°, 90°, and the oblique angles of impingement jets on the streamwise section are 70°, 90°, 110°. The investigation focuses on the oblique angle influence of impinging jet array on the fluid flow and heat transfer characteristics of a corrugated structure.

참고문헌 (Reference)

1 황병조, "충돌제트에서의 유량공급 채널 및 제트 홀 배열에 따른 열유동 특성 수치해석" 한국추진공학회 20 (20): 77-86, 2016

2 Menter, F. R., "Two-Equation Eddy-Viscosity Turbulence Models for Engineering Applications" 32 (32): 1598-1605, 1994

3 Liu, H. H. T., "Three-Dimensional Integrated Thermodynamic Simulation for Wing Anti-Icing System" 41 (41): 1291-1297, 2004

4 Weigand, B., "Multiple Jet Impingement–A Review" 42 (42): 101-142, 2011

5 Sagot, B., "Jet Impingement Heat Transfer on a Flat Plate at a Constant Wall Temperature" 47 (47): 1610-1619, 2008

6 Isman, M.K., "Investigation of Laminar to Turbulent Transition Phenomena Effects on Impingement Heat Transfer" 52 (52): 2027-2036, 2016

7 Zuckerman, N., "Impingement Heat Transfer : Corrections and Numerical Modeling" 127 (127): 544-552, 2005

8 Correia, V. H. S., "Impingement Cooling Apparatus for Turbine Shrouds having Ducts of Increasing Cross-Sectional Area in the Direction of Post-Impingement Cooling Flow"

9 Viskanta, R., "Heat Transfer to Impinging Isothermal Gas and Flame Jet" 6 (6): 111-134, 1993

10 Goldstein, R. J., "Heat Transfer From a Flat Surface to an Oblique Impinging Jet" 110 (110): 84-90, 1988

11 Wang, B., "Heat Transfer Characteristic Research During Jet Impinging on Top/Bottom Hot Steel Plate" 101 : 844-851, 2016

12 Han, J., "Gas Turbine Heat Transfer and Cooling Technology" CRC Press 2013

13 Chi, Z., "Experimental and Numerical Study of the Anti-Crossflows Impingement Cooling Structure" 64 : 567-580, 2013

14 Yang, L., "Effect of Corrugated Orifice and Pin-Fin on Multiple Array Impingement Cooling with Low Nozzle to Target Distance" 2014

15 Bunker, R. S., "Cooling for Double-Wall Structures"

16 Esposito, E.I, "Comparing Extended Port and Corrugated Wall Jet Impingement Geometry for Combustor Liner Backside Cooling" 2007

17 Hofmann, H. M., "Calculations of Steady and Pulsating Impinging Jets-An Assessment of 13 Widely Used Turbulence Models" 51 (51): 565-583, 2007

18 Vipat, O., "Asymmetric Entrainment Effect on the Local Surface Temperature of a Flat Plate Heated by an Obliquely Impinging Two-Dimensional Jet" 52 (52): 5250-5257, 2009

19 Li, W., "Assessment of Six Turbulence Models for Modeling and Predicting Narrow Passage Flows, Part 1 : Impingement Jets" 69 (69): 109-127, 2016

20 Haumann, J., "Apparatus for Impingement Cooling"

21 Jambunathan, K., "A Review of Heat Transfer Data for Single Circular Jet Impingement" 13 (13): 106-115, 1992