자기베어링이 적용된 미세홀 가공용 드릴링 스핀들 개발

다국어 초록 (Multilingual Abstract)

For special materials such as tempered glass, ceramics and silicon, micro-holes less than 1 mm in diameter are generally machined through drilling using high speed spindles, but their productivity is very low due to slow machining speed. Further, when a plurality of fine holes are machined on a large-area wafer, if the machining drill is damaged and any machining failure occurs, the entire wafer becomes defective and the cost loss becomes large. In the field, maintenance costs are very high because drills are replaced periodically to avoid these defects. Applying a magnetic bearing to the spindle for micro-hole machining eliminates friction and wear between the bearing and the rotor, eliminating the need for bearing maintenance. In addition, the control current of the magnetic bearings can monitor the drill abrasion and machining conditions to prevent unconditional drill replacement, thus reducing maintenance cost and preventing machining failure. In this paper, we designed and fabricated 80 000 r/min micro-hole machining spindle equipped with magnetic bearings, and presented rotational and machining test results.

참고문헌 (Reference)

1 나언주, "전자석 바이어스 반경방향-축방향 일체형 자기베어링 해석" 한국소음진동공학회 20 (20): 1038-1045, 2010

2 박철훈, "자기베어링 적용 공작기계용 고속 스핀들 개발" 한국소음진동공학회 25 (25): 895-900, 2015

3 Park, C. H., "Vacuum Chamber-free Centrifuge with Magnetic Bearings" 84 (84): 095106-, 2013

4 박철훈, "Thrust Hybrid Magnetic Bearing using Axially Magnetized Ring Magnet" 한국자기학회 18 (18): 302-307, 2013

5 Yoon, T. G., "Study on Performance of 50,000 rpm Class High-frequency Spindle Applied Magnetic Bearing" 806-, 2015

6 Wroblewski, A. C., "Model Identification, Updating, and Validation of an Active Magnetic Bearing High-Speed Machining Spindle for Precision Machining Operation" Cleveland State University 2011

7 Park, C. H., "Development of 5 kWh Flywheel Energy Storage System Using MATLAB/xPC Target" 701-705, 2009

8 Park, C. H., "Design of Magnetic Bearings for Turbo Refrigerant Compressors" 15 (15): 245-252, 2014

9 Park, C. H., "Design of 50,000 rpm High-frequency Spindle with Magnetic Bearings" 808-, 2015

10 Park, C. H., "Design and Experiment of 300-HP-Class Turbo Compressor with Hybrid Magnetic Bearings" T3A1 : 10009-, 2016

11 박철훈, "200 마력급 터보 블로워 적용을 위한 자기베어링 설계" 한국유체기계학회 18 (18): 12-18, 2015