전기방사법의 제조 조건에 따른 폴리케톤 마이크로/나노섬유 분리막 제조 및 유수 분리 적용

국문 초록 (Abstract)

본 연구에서는 polyketone (PK)을 이용하여 전기방사 조건에 따른 섬유 형상의 특성 변화와 유수분리 가능성을 확인해 보았다. 고습과 저습 조건에서는 마이크론 직경의 섬유가 형성되었으며, 특히 고습에서는 섬유의 표면이 거칠게 변한 것이 확인되었다. 섬유 직경을 micro에서 nano로 변경하기 위하여 방사용액에 염을 추가하였으며, 그 결과 섬유 직경이 약 90% 감소하는 것을 확인할 수 있었다. 제조된 rPK-LNC와 PK-H로 유수분리 특성을 확인하기 위해 oil/water 에멀션으로 중 력 조건에서 유수분리를 진행하였으며 total organic carbon (TOC)와 탁도를 측정하여 특성을 분석하였다. 제거율 확인결과 탁도가 TOC와 동일한 경향성을 나타내는 것이 확인되었다. 따라서 본 연구에서는 고분자의 방사조건과 염의 유무에 따른 분리막의 섬유 형상과 물리적 특성변화와 이를 이용한 유수분리 특성에 대해 연구하였다.

다국어 초록 (Multilingual Abstract)

In this study, a novel material polyketone (PK) was chosen and PK micro/nano fiber membranes were fabricated via electrospinning method under various conditions. After that, the potential application in oil-water separation was thoroughly investigated. The surface of microfiber membrane formed under high humidity especially became much rougher than that formed under low humidity. When salt was added to the spinning solution, the diameter of fibers was reduced up to 90% and the nanofiber membranes could be formed. The oil/water emulsions were prepared and separated under gravity condition using the manufactured rPK-LNC and PK-H membranes. The separation characteristics was evaluated by measuring total organic carbon (TOC) and turbidity. Meanwhile, the changes in the physical properties of fiber membranes under various conditions and with or without salt, as well as the changes in oil water separation characteristics were also studied.

목차 (Table of Contents)

• 요 약
• Abstract
• 1. 서 론
• 2. 실 험
• 2.1. 재료
• 2.2. 폴리케톤 분리막 제조
• 2.3. 분리막 특성분석
• 2.4. 유수 에멀션 분리성능 측정
• 3. 결 과
• 3.1. 구조 및 표면 분석
• 3.2. 기계적 특성 분석
• 3.3. 폴리케톤 분리막의 유수분리 실험
• 4. 결 론
• Reference

참고문헌 (Reference)

1 장원기, "전기방사법을 이용한 PVdF/Fe3O4-GO(MGO) 복합 분리막 제조 및 비소 제거 특성평가" 한국막학회 26 (26): 480-489, 2016

2 Z. Shi, "Ultrafast separation of emulsified oil/water mixtures by ultrathin free-standing single-walled carbon nanotube network films" 25 : 2422-2427, 2013

3 X. Zhang, "Superhydrophobic surfaces : From structural control to functional application" 18 : 621-633, 2008

4 W. Zhang, "Superhydrophobic and superoleophilic PVDF membranes for effective separation of water-in-oil emulsions with high flux" 25 : 2071-2076, 2013

5 이병희, "Review on Oil/Water Separation Membrane Technology" 한국막학회 30 (30): 359-372, 2020

6 S. Jamaly, "Recent improvements in oily wastewater treatment : Progress, challenges, and future opportunities" 37 : 15-30, 2015

7 Y. Peng, "Recent advances in biomimetic thin membranes applied in emulsified oil/water separation" 4 : 15749-15770, 2016

8 O. Ohsawa, "Preparation and characterization of polyketone(PK)fibrous membrane via electrospinning" 51 : 2007-2012, 2010

9 R. S. Barhate, "Preparation and characterization of nanofibrous filtering media" 283 : 209-218, 2006

10 C. Liu, "Organic Liquid Mixture Separation Using an Aliphatic Polyketone-Supported Polyamide Organic Solvent Reverse Osmosis(OSRO)Membrane" 12 : 7586-7594, 2020

11 L. Zhang, "One-step fabrication of robust and antioil-fouling aliphatic polyketone composite membranes for sustainable and efficient filtration of oil-in-water emulsions" 6 : 24641-24650, 2018

12 S. Jeon, "Novel preparation and fundamental characterization of polyamide 6 self-supporting hollow fiber membranes via thermally induced phase separation(TIPS)" 546 : 1-14, 2018

13 M. Cheryan, "Membrane processing of oily streams. Wastewater treatment and waste reduction" 151 : 13-28, 1998

14 C. H. Peterson, "Long-Term Ecosystem Response to the Exxon Valdez Oil Spill" 302 : 2082-2086, 2003

15 A. K. Kota, "Hygro-responsive membranes for effective oilg-water separation" 3 : 1025-, 2012

16 R. P. Schwarzenbach, "Global water pollution and human health" 35 : 109-136, 2010

17 L. Cheng, "Fouling-Resistant and Self-Cleaning Aliphatic Polyketone Membrane for Sustainable Oil-Water Emulsion Separation" 10 : 44880-44889, 2018

18 Y. Dou, "Fish Gill Inspired Crossflow for Efficient and Continuous Collection of Spilled Oil" 11 : 2477-2485, 2017

19 J. Wu, "Facile fabrication of nanofiber-and micro/nanosphere-coordinated PVDF membrane with ultrahigh permeability of viscous water-in-oil emulsions" 6 : 7014-7020, 2018

20 J. Hou, "Facile fabrication and characterization of aliphatic polyketone(PK)micro/nano fiber membranes via electrospinning and a post treatment process" 11 : 678-683, 2020

21 J. Lin, "Facile control of intra-fiber porosity and inter-fiber voids in electrospun fibers for selective adsorption" 4 : 5316-5320, 2012

22 J. Hou, "Fabrication and Characterization of Modified Graphene Oxide/PAN Hybrid Nanofiber Membrane" 9 : 122-, 2019

23 W. Ma, "Electrospun fibers for oil-water separation" 6 : 12868-12884, 2016

24 L. Cheng, "Dual Superlyophobic Aliphatic Polyketone Membranes for Highly Efficient Emulsified Oil-Water Separation : Performance and Mechanism" 10 : 7586-7594, 2018

25 C. Wu, "Development of high-strength fibers from aliphatic polyketones by melt spinning and drawing" 82 : 1794-1815, 2001

26 A. Tuteja, "Designing superoleophobic surfaces" 318 : 1618-1622, 2007

27 J. M. Lagaron, "Characterization of the structure and crystalline polymorphism present in aliphatic polyketones by Raman spectroscopy" 33 : 1030-1035, 2000

28 J. Ge, "Biomimetic and Superwettable Nanofibrous Skins for Highly Efficient Separation of Oil-in-Water Emulsions" 28 : 1-10, 2018

29 M. Mulder, "Basic principles of membrane technology" Springer Science & Business Media 1996

30 P. H. H. Duong, "Application of thin film composite membranes with forward osmosis technology for the separation of emulsified oil-water" 452 : 117-126, 2014

31 L. Yu, "A review of treating oily wastewater" 10 : S1913-S1922, 2017