전개장치용 복합재료 테이프 스프링 개발 = Development of Composite Tape-Springs for Deployable Structures

국문 초록 (Abstract)

본 논문에서는 전개장치용 복합재료 테이프 스프링 개발을 위해 테이프 스프링의 설계, 해석, 제작 및 기계적 특성을 검토하였다. 이를 위해 다양한 복합재료 소재를 선정하고 3개의 적층 패턴에 따라 제작하여 굽힘 시 파손여부를 구조해석과 실험적으로 검토하였다. 이중 파손이 발생하지 않고 잘 굽혀지는 소재와 적층 패턴을 선정하였다. 이렇게 확보된 정보를 이용해 전개구조물용 테이프 스프링을 개발하고 4점 굽힘 시험을 통해 구조적인 특성을 검토하였다. 시험 결과로부터 굽힘과 펴짐에 따라 모멘트-회전 곡선에서 테이프 스프링 고유의 비선형 히스테리시스 현상이 적절히 구현됨을 확인하였다. 따라서 복합재료 테이프 스프링이 적절히 개발된 것을 확인하였다.

다국어 초록 (Multilingual Abstract)

In this paper, development of tape-springs made of composite materials was conducted for the deployment structures along with design, analysis, fabrication, and numerical and experimental investigation of mechanical behavior of the tape-springs. To this end, the tape-springs were manufactured according to three stacking patterns, and numerical and experimental investigation were conducted to determine whether or not they were damaged during bending with various selected composite materials. Finally, optimal stacking patterns that do not cause damage were selected during bending. With this information, the four-point bending test was conducted to obtain the moment-rotation curves. From results, it was confirmed that the nonlinear hysteresis phenomenon of the tape-springs was properly realized according to folding and unfolding. Therefore, it was confirmed that the composite material tape spring was properly developed.

참고문헌 (Reference)

1 박신무, "계면 특성을 고려한 무작위 섬유배치를 갖는 단방향 복합재료의 가로방향 기계적 물성 예측 및 보정" 한국복합재료학회 32 (32): 270-278, 2019

2 "http://www.skchemicals.com"

3 "http://www.hcarbon.com"

4 Mallikarachchi, H. M. Y. C., "Thin-Walled Composite Deployable Booms with Tape-Spring Hinges" Cambridge University 2011

5 Walker, S., "Study of the Dynamics of Three Dimensional Tape Spring Folds" 42 (42): 850-856, 2004

6 Mallikarachchi, H. M. Y. C., "Quasi-static Folding and Deployment of Ultrathin Composite Tape-spring Hinges" 48 (48): 187-198, 2011

7 Ye, H., "Optimal Design of a Three Tape-spring Hinge Deployable Space Structure Using an Experimentally Validated Physics-based Model" 56 (56): 973-989, 2017

8 신구환, "Operational Concept of the NEXTSat-1 for Science Mission and Space Core Technology Verification" 한국우주과학회 31 (31): 67-72, 2014

9 Seffen, K. A., "On the Behavior of Folded Tape-Springs" 68 (68): 369-375, 2001

10 Fernandez, J. M., "NASA’s Advanced Solar Sail Propulsion System for Low-Cost Deep Space Exploration and Science Missions that Use High Performance Rollable Composite Booms" 2017

11 Dewalque, F., "Mechanical behavior of Tape Springs Used in the Deployment of Reflectors Around a Solar Panel" 123 : 271-282, 2016

12 Rahman, M., "Machinablity Study of Carbon Fiber Reinforced Composite" 89 : 292-297, 1999

13 Mansfield, E.H, "Large-Deflexion Torsion and Flexure of Initially Curved Strips" 279-298, 1973

14 Seffen, K. A., "Folding and Deployment of Curved Tape Springs" 42 (42): 2055-2073, 2000

15 Seffen, K. A., "Folded Orthotropic Tape-springs" 123 : 138-148, 2019

16 Renjin, J. B., "Failure Analysis of FRP Composite Laminates Using Progressive Failure Criteria" 8 (8): 1651-1662, 2017

17 Kim, D. Y., "Experimental and Numerical Investigation of Solar Panels Deployment with Tape Spring Hinges Having Nonlinear Hysteresis with Friction Compensation" 10 (10): 7902-, 2020

18 Walker, S., "Experimental Investigation of Tape Springs Folded in Three Dimensions" 44 (44): 151-159, 2006

19 Wuest, V. W., "Einige anwendungen der theorie der zylinderschale" 34 (34): 444-454, 1954

20 Soykasap, O., "Deployment Analysis of a Self-deplyable Composite Boom" 89 (89): 374-381, 2009

21 Yee, J. C., "Composite Tube Hinges" 18 (18): 224-231, 2005

22 Bourgeois, S., "Buckling Analysis of Tape Springs Using a Rod Model with Flexible Cross-sections" 21 (21): 184-194, 2012

23 Carlsson, L. A., "Basic Experimental Characterization of Polymer Matrix Composite Materials" 53 (53): 277-302, 2013

24 Santer, M., "Actuated Bistable Jumping Structures" 77 (77): 031009-, 2010

25 Jeong, G., "A Virtual Experimental Approach to Evaluate Transverse Damage Behavior of a Unidirectional Composite Considering Noncircular Fiber Cross-sections" 228 : 111369-, 2019