연결고정, 인접면 접촉강도 및 치관길이에 따른 엔도포어 임플란트를 이용한 고정성 국소의치의 광탄성 응력 분석 = A PHOTOELASTIC STRESS ANALYSIS OF FIXED PARTIAL DENTURES WITH ENDOPOREIMPLANTS ACCORDING TO SPLINTING, CONTACT TIGHTNESS, AND CROWN LENGTH

다국어 초록 (Multilingual Abstract)

Statement of problem: A difficulty in achieving a passive-fitting prosthesis can be overcome by individual crown restoation of multiple implants. But individualized crown has another difficulty in control of contact tightness and stress distribution. Purpose: This in vitro study is to evaluate the stress distribution and the magnitude in the supporting tissues around Endopore implants with different crown lengths, interproximal contact tightness, and the splinting effects. Material & methods: Three Endopore implants($4.1{\times}9mm$) were placed in the mandibular posterior edentulous area distal to the canine and photoelastic model was made with PL-2 resin(Measurements Group, Raleigh, USA). Restorations were fabricated in two crown lengths: 9, 13 mm. For non-splinted restorations, individual crowns were fabricated on three custom-milled titanium abutments. After the units were cemented, 4 levels of interproximal contact tightness were evaluated: open, ideal($8{\mu}m$ shim stock drags without tearing), medium($40{\mu}m$), and heavy($80{\mu}m$). For splinted restorations, 3-unit fixed partial dentures were fabricated. This study was examined under simulated non-loaded and loaded conditions(6.8 kg). Photoelastic stress analysis was carried out to measure the fringe order around the implant supporting structure. Results: 1. When restorations were not splinted, the more interproximal contact tightness was increased among the three implants, the more stress was shown in the cervical region of each implant. When crown length was increased, stresses tended to increase in the apex of implants but there were little differences in stress fringes. 2. When nonsplinted restorations were loaded on the first or third implant, stresses were increased in the apex and cervical region of loaded implant. Regardless of interproximal contact tightness level, stresses were not distributed among the three implants. But with tighter interproximal contact, stresses were increased in the cervical region of loaded first or third implant. 3. When the nonsplinted restorations were not loaded, there were little stresses on the supporting structure of implants, but low level stresses were shown in the splinted restorations even after sectioning and soldering. 4. With splinted restorations, there were little differences in stresses between different crown lengths. When splinted restorations were loaded, stresses were increased slightly on the loaded implant, but relatively even stress distribution occurred among the three implants. Conclusions: Splinting the crowns of adjacent implants is recommended for Endopore implants under the overloading situation.

참고문헌 (Reference)

1 "titanium alloy dentalimplants in dogs" 1064-1070,

2 "Treatment planning and placementof implants in the posterior maxillae" 151-61, intjoralmaxillofacimplants1993

3 "Treatment outcomes ofpatients with implant-supported fixed partialprostheses" 13 : 204-11, 1998

4 "The rotational aspect of mandibularflexure" 483-5,

5 "The final touch in the deliveryof a fixed prosthesis J of the CaliforniaDental Assoc 1984" 21-9,

6 "The effect of partial coating withhydroxyapatite on bone remodeling in relationto porous-coated titanium alloy dentalimplants in the dog" 1338-45,

7 "The applicability of osseointe grated implantsin the rehabilitation of partial edentulism" 5 : 272-81, 1990

8 "Ten-year results of a prospective study using porous-surfaced dental implants and a mandibular overdenture." 4 : 183-9, 2002

9 "Short versus long implant conceptsfunctional surface area" 1999August

10 "Poroussurfaceddental implants in the partiallyedentulous maxilla Assessment for subclinicalmobility" 22 : 184-92, 2002

11 "Photoelastic stress analysis of load transfer to implants and natural teeth comparing rigid and semirigid connectors" 81 : 696-703, 1999

12 "Passivity of fit and marginal opening in screw- or cemented-retained implant fixed partial denture designs" 15 : 239-46, 2000

13 "Osseointegrated implants in the treatmentof partially edentulous jaws" A prospective5-year multicenter study 627-35, intjoralmaxillofacimplants1994

14 "Osseointegrated implants in the treatment ofthe edentulous jaw experience from a 10 yearperiod" nemark PI 1-132, scandjplastreconstrsurg1977

15 "Managing the posterior mandible of partially edentulous patients with short porous-surfaced dental implants: Early data from a clinical trial" 16 : 653-58, 2001

16 "Implant prothodontics: Current perspective and future directions" 15 : 66-75, 2000

17 "Hydroxyapatite-coated implants: a case for their use" 56 : 1303-11, 1998

18 "Five-to six-year results of a prospective clinical trial using the Endopore dental implant and a mandibular overdenture" 10 : 95-102, 1999

19 "Effects of prosthesis materials and prosthesis splinting on peri-implant bone stress around implants in poor-quality bone: a numeric analysis" 17 : 231-7, 2002

20 "Effects of periodontal support and fixed splinting on load transfer by removable partial dentures" 79 : 465-71, 1998

21 "Contemporary fixed prosthodontics" Mosby 747-9, 1998

22 "Clinical evaluations of a porous- surfaced endosseous implant system" 22 : 240-6, 1996

23 "Biomechanical concerns with fixedpartial dentures involving implants" 221-42, implantdent1993

24 "Afinite elementsurvey of eleven endosseous implants" 457-65,

25 "A solution for special bonesituations and a rescue for the compromisedimplant" 400-8, intjoralmaxillofacimplants1993

26 "A prospective clinical study in humans of a dental implant partially covered with a powdersintered porous coating: 3-to 4-year results." 11 : 87-95, 1996

27 "A 1-year follow-up of implants of differing surface roughness placed in rabbit bone." 12 : 486-94, 1997