급수용 감압밸브의 비다이어프램 스템에서 압축스프링에 따른 유량 및 토출압력 효과 = Effects of Flow Rate and Discharge Pressure with Compressing Spring in Non-diaphragm Type Stem of Water Pressure Reducing Valve

다국어 초록 (Multilingual Abstract)

The pressure reducing valve for water is controlled by the load of the compression spring and the force of the fluid acting on the diaphragm of the stem. Repeated upward and downward reciprocation of the pressure-reducing valve stem damages the diaphragm, resulting in leakage. In this study, we designed a stem without a diaphragm and adjusted the stiffness of the compressing spring. In order to select the spring stiffness, springs offering a stiffness of -20%, -10%, 0%, and 10% with respect to the stiffness of the compression spring attached to the existing pressure reducing valve stiffness. A prototype for the pressure reducing valve was fabricated and the pressure change was evaluated for the target static pressure (6 bar) by testing the pressure characteristics after mounting the modified stem and each compression spring. Evaluation of the pressure characteristics was carried out using ASSE 1003 and KS B 6153. In addition, the flow rates were compared by internal flow analysis of the conventional pressure reducing valve and the pressure reducing valve using the modified stems, and the flow analysis was performed using Solidworks flow simulation 2018. The spring stiffness was constantly discharged at the target static pressure of 3.793 kgf/mm, and the flow rate was increased by about 15% compared with the conventional pressure reducing valve.

목차 (Table of Contents)

• ABSTRACT
• 1. 서론
• 2. 스템 설계 변경과 압축스프링 강성선정
• 3. 실험 장치 및 방법
• 4. 실험 결과 및 고찰
• 5. 결론
• REFERENCES

참고문헌 (Reference)

1 박만호, "엔지니어링 플라스틱 소재별 보강뿔대 형상에 따른산업용 안전모의 구조 최적화" 한국기계가공학회 18 (18): 41-48, 2019

2 정인덕, "소비자 맞춤형 개념설계 및 쿠션부 충격해석을 통한 외피형 에어백 헬멧 개발" 한국기계가공학회 15 (15): 101-108, 2016

3 배준경, "브러시 공정을 이용한 변속기 밸브바디의 효율적인 디버링 방법 개발" 한국기계가공학회 17 (17): 144-152, 2018

4 박우철, "구조-유체 연성해석을 통한 수도용 감압밸브에서의 유체유발진동에 관한 연구" 한국산학기술학회 13 (13): 4371-4377, 2012

5 강창원, "계장용 볼 밸브 유량계수 Cv 측정에 관한 연구" 한국기계가공학회 18 (18): 103-108, 2019

6 이종선, "감압밸브의 설계 및 유동해석" 한국산학기술학회 13 (13): 2853-2857, 2012

7 이정희, "Valve Seat Design for Full Contact Effect Using Grey Relational Analysis" 한국기계가공학회 17 (17): 17-22, 2018

8 Allison, T., "Testing and Modeling of an Acoustic Instability in Pilot Operated Pressure Relief Valves" 138 (138): 2015

9 Samar, G. V., "Solidworks Flow Simulation 2018 Black Book" CadCamCae Works 2018

10 Yun, S. N., "Pressure Control Characteristics of Propotional Pressure Redcuing Valve" 7 (7): 68-73, 2003

11 Janus, T., "Hydraulic Modeling for Pressure Reducing Valve Controller Design Addressing Disturbance Rejection and Stability Properties" 186 : 635-642, 2017

12 Jury, F. D., "Fundamentals of Gas Pressure Regulation" Fisher Control 1972

13 Hös, C. J., "Dynamic Behaviour of Direct Spring Loaded Pressure Relief Valves Connected to Inlet Piping" 48 : 270-288, 2017

14 Hong, Y. S., "Development of a Direct-Operated Proportional Pressure Reducing Valve for Low-Band Type Active Suspension Cotrol" 2 (2): 75-84, 1994

15 박주용, "CFD 해석을 이용한 판형 체크 밸브에 대한 스프링 강성의 설계 기준" 한국기계가공학회 13 (13): 49-55, 2014

16 "ASSE 1003, Performance Requirments for Water Pressure Reducing Valves for Domestic Water Distribution Systems"

17 Yang, K. U., "A modeling of Proportional Control Valve and its Control" 6 (6): 71-77, 2002

18 이형욱, "3D 프린팅을 이용한 고온용 솔레노이드 밸브의 시제품 제작 및 유량과 동적특성 평가" 한국정밀공학회 33 (33): 341-348, 2016