플라즈마 조사에 의한 전기분무합성 SiO₂ 코팅층의 물접촉각 변화

김재훈,이준성,김지영,김상섭,Kim, Jae-Hun,Lee, Junseong,Kim, Ji Yeong,Kim, Sang Sub 한국재료학회 2014 한국재료학회지 Vol.24 No.11

Hydrophilic $SiO_2$ layers were obtained by the atmospheric-pressure plasma treatment. Superhydrophobic $SiO_2$ layers were first deposited by the electrospray deposition method. The electrospunable solution that was prepared based on the solgel method was sprayed on Si (100) substrates. The surface of the electrosprayed $SiO_2$ layers consisted of the agglomeration of nano-sized grains, which led to a very high roughness and revealed a very high contact angle to water droplets over $162^{\circ}$. After having been exposed to the atmospheric $Ar/O_2$ plasma, the observed superhydrophobicity of the $SiO_2$ layers were greatly changed: a dramatic variation of the water contact angle from $162^{\circ}$ to $3^{\circ}$, namely realization of superhydrophillicity. Interestingly, the surface microstructure was almost preserved. According to the XPS analysis, it is more likely that thanks to the plasma exposure, the surface of $SiO_2$ layers will be cleaned in terms of organic species that are hydrophobic-inducing, consequently leading to the hydrophilic nature observed for the plasma-exposed $SiO_2$ layers.

RFCVD 장치를 이용하여 성장한 실리콘 나노와이어의 특성

김재훈,이형주,신석승,김기영,고춘수,김현숙,황용규,이충훈,Kim, Jae-Hoon,Lee, Hyung-Joo,Shin, Seok-Seung,Kim, Ki-Young,Go, Chun-Soo,Kim, Hyun-Suk,Hwang, Yong-Gyoo,Lee, Choong-Hun 한국전기전자재료학회 2007 전기전자재료학회논문지 Vol.20 No.2

We have synthesized silicon nanowires by using RFCVD(Radio Frequency Chemical Vapor Deposition) system on Au deposited p-type Si(100) wafers, and investigated their physical and electrical properties. The silicon nanowires had been grown in the atmospheres of $H_{2},\;N_{2}\;and\;SiH_{4}$ at 10 Torr at the substrate temperatures of $700{\pm}5^{\circ}C\;and\;810{\pm}5^{\circ}C$ respectively. FE-SEM analysis revealed that diameters of the silicon nanowires are $50{\sim}60nm$ with the length of several ${\mu}m$. XRD analysis showed that the growth direction of the nanowires is Si[111]. Field emission characteristics showed that the turn-of voltages at the current of $0.01\;mA/cm^{2}$ are $10\;V/{\mu}m\;and\;8.5\;V/{\mu}m$ for the wires grown at $700{\pm}5^{\circ}C\;and\;810{\pm}5^{\circ}C$, respectively.

고로슬래그미분말을 혼입한 고유동콘크리트에서 골재조합이 콘크리트 유동성상에 미치는 영향에 관한 실험 연구

김재훈,윤상천,지남용,Kim, Jae-Hun,Yoon, Sang-Chun,Jee, Nam-Yong 한국건축시공학회 2003 한국건축시공학회지 Vol.3 No.4

The purpose of study is to offer base data for high fluid concrete mix property, as grasp effect of aggregate to reach much more effect for producing high fluid concrete. For this study, there are three types of combined aggregates, river sand + river aggregate(type A), river sand + crusted aggregate(type B), washed sea sand + crushed aggregate(type C) and take a factor, water-contents, water-binder ratio and S/a. And so, we had following conclusion, resulting application-ability of high fluid mortar by K-slump tester to use a handy consistency measuring instrument. And so, we had following conclusion, resulting application-ability of high fluid concrete by K-slump tester to use a handy consistency measuring instrument. 1) In cafe of regular water binder ratio, high fluid concrete suffered much effect of combined aggregates and water binder ratio. Range of water binder ratio by combined aggregates is w/b 0.4 downward(type A and B), w/b 0.35 downward(type C). 2) Water contents to need for producing high fluid concrete is minimum 170kg/$\textrm{m}^3$ without regard to combined aggregates. 3) The effect of S/a on high fluid concrete by combined aggregates is approximately S/a 50% (type A and B), s/a 50-55% (type C). 4) Consistency measuring of high fluid concrete by K-slump tester is possible and first indication value, high fluid concrete can be produced, is 6~10.5cm.

대형구조물 구동계통 실시간 시뮬레이션 모델 유도 및 연동 특성 분석에의 응용

김재훈,최영호,유웅재,유준,Kim, Jae-Hun,Choi, Young-Ho,Yoo, Woong-Jae,Lyou, Joon 한국군사과학기술학회 2000 한국군사과학기술학회지 Vol.3 No.1

A simulation model is developed to analyze the large-structure driving system and its integrated behavior in the whole weapon system. It models every component in the driving system such as mechanical and electrical characteristics, and it is programmed by simulation language in a way which strongly reflects the system's real time dynamics and reduces computation time as well. A useful parameter identification method is proposed, and it is tuned on the given physical system. The model is validated through comparing to real test, and it is applied to analysis and prediction of integrated system functions relating to the fire control system.

CFRP로 보강된 철근콘크리트 보의 휨 보강효과에 관한 실험적 연구

김재훈,박성무,강주원,신승협,Kim, Jae-Hun,Park, Sung-Moo,Kang, Joo-Won,Shin, Seung-Hyup 한국공간구조학회 2006 한국공간구조학회지 Vol.6 No.2

Recently, many researches have been conducted about reinforced concrete structures strengthened with FRP plates. In case of structures strengthened with FRP plates, the issue of premature debonding FRP plate has been raised through many previous researches. The purpose of this paper is what structural behavior and flexaural capacity of reinforced concrete beams which are strengthened for flexure is investigated about the using secondary ironware in the method of external bonded CFRP plate, and the method of near surface mounted CFRP-Rod. Also, in order to evaluate flexural capacity, experiments of the reinforced concrete beams with exteranl bonded CFRP plate and near surface mounted CFRP-Rod have been compared and investigated.

탄소섬유 보강재로 보강한 RC 보의 보강효과에 관한 실험적 연구

김재훈,박성무,강주원,Kim, Jae-Hun,Park, Sung-Moo,Kang, Joo-Won 한국공간구조학회 2005 한국공간구조학회지 Vol.5 No.4

Bonded CFRP Plate method used murk in reinforcement method is very efficient for stress increment of reinforced members. But CFRP plate dosen't display enough its capacity and have the destruction characteristic of premature failure that reach failure by debond plate, because near-surface-bond using epoxy. Such destruction character of reinforced specimens take the influence at variables as steel reinforcement ratio, concrete strength, kind of reinforcement materials, reinforced length, property of epoxy used in binder and so on. In this study, performed experiment results are compared and considered on flexural performance of Near Surface Mounted Reinforcement used CFRP-Rod, as complement about structural behavior of RC beam reinforced flexural capacity in CFRP plate and premature failure of reinforcement material. Main variables of RC beam applied CFRP Plate external bond method are experimental variables as reinforcement length, reinforcement position (tension face and side face of beam) and existence of ironware in end parts. In case of CFRP-Rod, variable is reinforcement length.

Markov process 및 상태천이확률 행렬 계산을 통한 사격통제장치 전처리필터 신뢰성 산출 기법

김재훈,유준,Kim, Jae-Hun,Lyou, Joon 한국군사과학기술학회 1999 한국군사과학기술학회지 Vol.2 No.2

An easy and efficient method is proposed for a computation of reliability of preprocessing filters in the fire control system when the sensor data are frequently unreliable depending on the operation environment. It computes state transition probability matrix after modeling filter states as a Markov process, and computing false alarm and detection probability of each filter state under the given sensor failure probability. It shows that two important indices such as distributed state probability and error variance can be derived easily for a reliability assessment of the given sensor fusion system.

품사 태깅 시스템의 신뢰도 측정

김재훈,Kim, Jae-Hun 한국정보처리학회 2001 정보처리학회논문지B Vol.8 No.4

본 논문에서는 품사 태깅 시스템에서 신뢰도 측정 방법에 대해서 기술한다. 품사 태깅 시스템의 신뢰도는 품사 태깅 결과에 오류가 포함되지 않을 확률이다. 일반적으로 신뢰도 측정은 오류확률에 기반한다. 정확한 오류확률을 추정하기 위해서는 일반적으로 품사 태깅 시스템에서 사용되는 말뭉치보다 훨씬 더 많은 양의 말뭉치가 필요하다. 이 문제를 다소 완화시키기 위해서, 본 논문에서는 좀더 정확한 오류확률 추정하기 위해 교차확인 방법을 이용한다. 본 논문에서 사용된 품사 태깅 시스템은 시험말뭉치에 대해서 61%의 신뢰도를 보였다. 이는 한국어 문장의 형태소 수가 평균 20개이고, 품사 태깅 시스템의 정확률이 97.5%일 때의 신뢰도에 해당한다. 본 논문에서 사용된 품사 태깅 시스템이 미등록어가 없을 경우에 97.68%의 정확률을 보이므로 제안된 신뢰도 측정 방법이 어느 정도 타당함을 알 수 있었다. 제안된 신뢰도 측정 방법은 구문분석, 정보검색 등 여러 분야에 응용이 가능할 것이며, 본 논문에서는 품사태깅의 오류검출에 적용해보았다.

표적추적센서의 측정 바이어스 오차 보상에 의한 사격통제장치 성능 향상 기법

김재훈,유준,Kim, Jae-Hun,Lyou, Joon 한국군사과학기술학회 2000 한국군사과학기술학회지 Vol.3 No.2

A practical method is proposed to improve hit probability of the digital gun fire control system, when the measured rate of the tracking sensor becomes biased under some operational situation. For ground moving target it is shown that the well-known Kalman filter which uses position measurement only can be optimally used to eliminate the rate bias error. On the other hand, for 3D moving aircraft we present a new algorithm which incorporate FIR-type filter, which uses position and rate measurement at the same time, and the fixed-lag smoother using position measurement only, and show that it has the optimal performance in terms of both estimation accuracy and response time.

차세대 LCD 구현을 위한 Printable Electronics 기술 개발 동향

김재훈,이유진,Kim, Jae-Hun,Lee, Yu-Jin 한국정보디스플레이학회 2011 인포메이션 디스플레이 Vol.12 No.1