http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
- 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
- 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
RISS 인기검색어
- 검색키워드
- 주제어 : DSP hybrid (검색결과 8 건)
- 무료
- 기관 내 무료
- 유료
-
고정도 위치제어용 Hybrid Type Encoder에 관한 연구
조수억,이상훈,송성근,박성준,권순재,김철우 전력전자학회 2005 전력전자학회 논문지 Vol.10 No.1
This paper is about the compensation of phase angle error and amplitude difference in stationary 2 pole coordinates by the installation variation of sensor at low cost high resolution digital hybrid encoder. To solve the problem of amplitude difference at the existing hybrid encoder, we normalized the relative magnitude of the two analog signals. and also to solve the problem of installation variation when installed the sensor, we rotate the stationary 2 pole coordinates to compensate the location error of sensor. and we used and tested the QEP function and A/D port in DSP(TMS320F2812) to verify the mentioned proposed method. 본 논문은 저가형 고정도 아날로그 디지털 혼합형 엔코더에서 센서 취부 오차에 의해 발생하는 정지 2축 좌표상의 두 아날로그신호의 크기, 위상오차 문제 보상에 관한 연구이다. 기존의 혼합형 엔코더에서 문제시되고 있는 두 아날로그 위치정보 신호의 크기문제는 상대 크기에 대하여 정규화 함으로써 해결하였으며, 센서 취부시 발생하는 위치오차문제는 정지 2축 좌표축을 센서의 위치 오차분을 보상할 수 있도록 회전함으로써 보상할 수 있었다. 또한 제안된 새로운 방식의 위치 검출기법을 DSP의 QEP기능과 A/D변환기를 사용한 실험을 통하여 그 타당성을 검증하였다.
-
이형상,김복규 한국음향학회 2021 韓國音響學會誌 Vol.40 No.3
Directional ultrasonic speakers that are used to hear sound only in a specific area have been continuously researched on various improvements in terms of sound quality and cost compared to general speakers. In this paper, we propose a DSP based hybrid-type ultrasonic speaker that can be heard at the same time as a general speaker in order to compensate for the sound in the low-band range, considering that it is difficult to hear the low-band sound below 500 Hz due to the sensor characteristics of the ultrasonic speaker. In the case of the system that is implemented by simply connecting a general speaker and an ultrasonic speaker, there are issues of high cost and difficulties of control as two amplifiers are used to playback ultrasonic and general sound sources. In addition, sound quality deteriorates due to the difference in playback time between ultrasonic and general sound sources. In order to improve issues of cost, control and sound quality, we developed hybrid-type ultrasonic speaker with a DSP based amplifier that can simultaneously playback by synchronizing the general sound source with the regenerated ultrasonic sound source, in addition to implement the existing CODEC functions such as Dynamic Range Control (DRC) and Equalizer (EQ). 소리에 방향성을 부여하여 특정 영역에서만 소리를 들을 수 있도록 활용되는 초음파 스피커는 일반 스피커와비교하여 음질 및 비용적인 이슈에서 다양한 개선 연구가 지속적으로 이루어지고 있다. 본 논문에서는 초음파 스피커의 센서 특성상 500 Hz 미만 저음 구현이 어려운 점을 감안하여 500 Hz 대의 소리를 보완할 수 있도록 일반 스피커와동시 사용이 가능한 DSP 기반의 하이브리드형 초음파 스피커를 제안한다. 일반 스피커와 초음파 스피커의 단순 연결로 각각의 분리 처리 및 송출하는 시스템은 초음파 재생성 처리 시간 차에 따른 음질저하뿐만 아니라 일반 음원과 초음파 음원이 2개의 앰프로 구동되어 높은 비용 이슈가 있으며 제반 제어적인 측면에서도 어려움이 있다. 이러한 점을 개선하고자 제안한 DSP 기반의 앰프에서 Dynamic Range Control(DRC) 및 Equalizer(EQ)의 기존 코덱 기능은 물론, 초음파 음원으로의 재생성, 일반/초음파 음원을 동기화함으로써 동시 재생이 가능한 하이브리드형 초음파 스피커를개발하였다.
-
-
3상 3.3kV/220V 6kVA 모듈형 반도체 변압기의 프로토타입 개발
김재혁(Jae-Hyuk Kim),김도현(Do-Hyun Kim),이병권(Byung-Kwon Lee),한병문(Byung-Moon Han),이준영(Jun-Young Lee),최남섭(Nam-Sup Choi) 대한전기학회 2013 전기학회논문지 Vol.62 No.12
This paper describes a prototype of 3-phase 3.3kV/220V 6kVA modular semiconductor transformer developed in the lab for feasibility study. The developed prototype is composed of three single-phase units coupled in Y-connection. Each single-phase unit with a rating of 1.9kV/127V 2kVA consists of a high-voltage high-frequency resonant AC-DC converter, a low-voltage hybrid-switching DC-DC converter, and a low-voltage hybrid-switching DC-AC converter. Also each single-phase unit has two DSP controllers to control converter operation and to acquire monitoring data. Monitoring system was developed based on LabView by using CAN communication link between the DSP controller and PC. Through various experimental analyses it was verified that the prototype operates with proper performance under normal and sag condition. The system efficiency can be improved by adopting optimal design and replacing the IGBT switch with the SiC MOSFET switch. The developed prototype confirms a possibility to build a commercial high-voltage high-power semiconductor transformer by increasing the number of series-connected converter modules in high-voltage side and improving the performance of switching element.
-
Synthesis and Implementation of a Multi-Port DC/DC Converter for Hybrid Electric Vehicles
Santhosh, T. K.,Natarajan, K.,Govindaraju, C. The Korean Institute of Power Electronics 2015 JOURNAL OF POWER ELECTRONICS Vol.15 No.5
A non-isolated Multiple Input Converter (MIC) with an input port, two storage ports and a load port is proposed. The synthesis of the proposed four port converter with its switch realization is presented. A steady state analysis of each operating mode with a small-signal model is derived, and a stability analysis is done. A mode selection controller is proposed to automatically choose a specific operating mode based on the voltage levels of the different source and storage units. In addition, a voltage control loop is used to regulate the output voltage. A 200W prototype is built with a TMS320F28027 DSP controller to test the feasibility of the operating modes. Simulation and experimental results show the ability of the proposed converter to handle multiple inputs either individually or simultaneously.
-
Synthesis and Implementation of a Multi-Port DC/DC Converter for Hybrid Electric Vehicles
T. K. Santhosh,K. Natarajan,C. Govindaraju 전력전자학회 2015 JOURNAL OF POWER ELECTRONICS Vol.15 No.5
A non-isolated Multiple Input Converter (MIC) with an input port, two storage ports and a load port is proposed. The synthesis of the proposed four port converter with its switch realization is presented. A steady state analysis of each operating mode with a small-signal model is derived, and a stability analysis is done. A mode selection controller is proposed to automatically choose a specific operating mode based on the voltage levels of the different source and storage units. In addition, a voltage control loop is used to regulate the output voltage. A 200W prototype is built with a TMS320F28027 DSP controller to test the feasibility of the operating modes. Simulation and experimental results show the ability of the proposed converter to handle multiple inputs either individually or simultaneously.
-
Experimental verification of interleaved hybrid DC/DC boost converter
Celik, M. Ali,Genc, Naci,Uzmus, Hasan The Korean Institute of Power Electronics 2022 JOURNAL OF POWER ELECTRONICS Vol.22 No.10
In this study, an improved interleaved hybrid DC/DC boost converter used for high-power applications with high voltage gain was proposed. The proposed DC/DC boost converter increases low-input voltage to the desired high-output voltage with a wide duty cycle range through the hybrid structure, thereby prolonging the lifetime of the proposed converter by decreasing the current on circuit components. An extra filter for input current ripples is unnecessary. The proposed converter is less complex and has easier control than the converters used for high voltage gain. The proposed converter was operated when the duty cycle (d) was larger and smaller than 0.5. It was also analyzed theoretically, and the average- and small-signal circuits were obtained to show its stability. The proposed converter was controlled with the conventional control method by using a modern digital signal processor TMS320F28379D board. The proposed converter and its controller were operated under different conditions.
-
DBpia연관 검색어 추천
이 검색어로 많이 본 자료
활용도 높은 자료
