Cr-Mo 합금강의 후열 처리 균열 감수성 평가

김상진,김기수,이영호 대한공업교육학회 2006 대한공업교육학회지 Vol.31 No.1

This C-ring test, normally employed for evaluating susceptibility to stress-corrosion cracking, was determined to be a suitable small scale test to evaluate PWHT(Post-Weld Heat Treatment) cracking susceptibility. This test is possible to incorporate an actual weld, to introduce a notch into the coarse grained HAZ(Heat Affected Zone), to load the coarse grained HAZ any level of stress ad, most importantly, since the C-ring is an approximately constant strain type test, the stress decreases with time at temperature in a manner similar to that of an actual steel weldment. The procedure employed in making the C-ring was presented in the experimental procedure section, however, several points deserve further discussion. The walls of the weld groove are made along radial lines form the center of th var in order to obtain an HAZ which is oriented perpendicular to the walls of the machined C-ring. Therefore, the plane of maximum stress will be aligned through the HAZ and, therefore, crack propagation will not be forced to deviate form the plane of maximum stress in order to remain in the coarse grained HAZ as is the case with the Y groove test. 초기 응력부식균열에 대한 감수성 평가 시험법인 C링 시험법(C-ring Test)은 용접부의 후열처리 균열감수성을 평가하는 시험법으로 적합하다고 알려져 있다. C링 시험법은 실제 용접부 열영향부에 노치를 제작하여 잔류응력이 열영향부에 미치는 영향을 평가할 수 있다는 장점을 가지고 있다. 따라서 본 연구에는 C링 시험법을 이용하여 원자력 발전소 압력용기에 사용되는 Co-Mo강의 용접부 결함 발생 현상을 검토 하고자 Co-Mo강에 대하여 후열처리를 실시하였으며, C링 시험법을 통하여 용접 열영향부의 후열처리 균열을 평가하고자한다. 결론은 다음과 같다.바나듐 모디파이 합금(AMAX 3Cr­1Mo­0.1V, JSW 3Cr­1Mo­V­Ti­B 및 JSW 2¼Cr­1Mo­V­Ti­B강)은 Berkeley 3Cr­1½Mo­ ½Ti 및 2¼Cr­1Mo합금강보다 후열처리 균열에 대한 감수성 보다 높게 나타났다.C-ring 시험에 있어서 바나듐 모디파이 합금은 2종의 후열처리조건과 3종의 응력조건에서 모두 균열을 나타냈으나 Berkeley 3Cr­1½Mo­½Ni강과 Luken 2¼Cr­1Mo­0.1C재료는 690㎫와 더 이상의 응력조건에서 2종의 후열처리를 실시하는 조건에서도 균열이 발생하지 않았다.C-ring 시험결과, 균열깊이는 바나듐 모디파이 재료인 경우, 낮은 후열처리온도와 비교해서 높은 후열처리온도인 경우가 감소하고 있다.C-ring 시험에 대한 SEM분석결과 균열은 오스테나이트 결정 입계를 따라 파괴되는 파괴양상을 나타내고 있으며 연성파면은 나타나지 않았다.

Mod.9Cr-1Mo 강 구조의 크리프-피로 균열 거동 평가법 개발

이형연(Hyeong-Yeon Lee),이재한(Jae-Han Lee) 대한기계학회 2010 大韓機械學會論文集A Vol.34 No.1

본 연구에서는 프랑스의 RCC-MR A16 절차에 기초하여 Mod.9Cr-1Mo 강(ASME Grade 91) 구조의 크리프-피로 균열 개시 및 성장 평가법을 확장 개발하였다. 현재의 A16 지침은 오스테나이트 스테인리스강에 대해서만 크리프-피로 균열 개시 및 성장 평가법을 제시하고 있지만, 현재 초초임계(USC) 화력발전소는 물론 미래형 원자로 시스템의 구조재료로서 폭넓게 채택되고 있는 Mod.9Cr-1Mo 강에 대한 지침은 제시하지 않고 있다. 본 연구에서는 FMS(페리틱-마르텐사이트강)에 대한 크리프-피로 균열 개시 및 성장 평가법을 제시하고 있고, 구조물에 대한 크리프-피로 균열 거동 평가를 수행하였다. 평가결과는 구조시험을 수행한 결과 얻은 관찰 이미지와 비교하였다. In this study, an assessment method on creep-fatigue crack initiation and crack growth for a Mod.9Cr-1Mo steel (ASME Grade 91) structure has been developed with an extension of the French RCC-MR A16 procedure. The current A16 guide provides defect assessment procedure for a creep-fatigue crack initiation and crack growth for an austenitic stainless steel, but no guideline is available yet for a Mod.9Cr-1Mo steel which is now widely being adopted for structural materials of future nuclear reactor system as well as ultra super critical (USC) thermal plant. In the present study an assessment method on creep-fatigue crack initiation and crack growth is provided for the FMS (Ferritic-Martensitic Steel) and assessment on the creep-fatigue crack behavior for a structure has been carried out. The assessment results were compared with the observed images from a structural test.

Mod.9Cr-1Mo 강 광판의 고온 균열성장 평가

이형연(Hyeong-Yean Lee),김종범(Jong-Bum Kim),이재한(Jae-Han Lee) 대한기계학회 2010 대한기계학회 춘추학술대회 Vol.2010 No.4

An assessment of a creep-fatigue crack growth for Mod. 9Cr-1Mo steel wide plate has been carried out based on an extended French high temperature design code, RCC-MR A16 guide. The defect assessment guide of the A16 provides assessment procedures on a creep-fatigue crack growth for an austenitic stainless steel, but no guidelines are available yet for a Mod. 9Cr-1Mo steel. In this study, assessments of a creep-fatigue crack growth at defects of Mod. 9Cr-1Mo steel wide plates have been carried out based on the extended A16 method with various mathematical models on crack growth.

보자력을 이용한 1Cr-1Mo-0.25V강 인공시효재의 열화도 평가

손대락,김용일,남승훈,유광민,유권상 韓國非破壞檢査學會 1999 한국비파괴검사학회지 Vol.19 No.4

고온에서 사용중인 터빈 로터의 안전성을 평가하기 위해서는 열화된 재료의 물성이 필요하다. 실제로 발전소에서 사용되고 있는 열화도가 다른 로터강을 종류별로 입수하기가 어렵기 때문에, 터빈 로터재로 널리 사용되고 있는 1Cr-1Mo-0.25V 강으로 인공열화 시료를 제작하였다. 실제로 사용된 재료의 미세조직과 유사한 미세조직을 갖는 시료를 얻기 위하여 실제 사용온도보다 높은 630℃의 등온에서 열처리시간을 다르게 하여 열화도가 다른 7종류의 시료를 얻었다. 열화도를 비파괴적으로 평가하기 위하여 상온에서 측정한 보자력을 이용하였다. 열화도의 증가에 따라 경도와 보자력은 감소하였는데, 이 원인을 미세조직 및 EPMA 분석에 의해 구명하였고, 경도와 보자력과의 상관관계를 만들어 비파괴적으로 열화도를 평가할 수 있는 기초를 마련하였다. The integrity of the turbine rotors can be assessed by the coercive force and Vickers hardness of the aged rotors at service temperature. The coercive force measurement system was constructed in order to evaluate material degradation nondestructively. The test specimen was 1Cr-1Mo-0.25V steel used widely for turbine rotor material, and then the seven kinds of specimens with different degradation levels were prepared by the isothermal heat treatment at 630℃. The coercive force of the test materials was measured at room temperature. Vickers hardness and coercive force of the test materials was measured at room temperature. Vickers hardness and coercive force decreased with the increase of degradation. The relationship between Vickers harness and coercive force was investigated The degradation of test material may be determined nondestructively by the relationship between Vickers hardness and coercive force.

2.25Cr-1Mo 강의 열화와 기계적 성질변화에 관한 연구

정희돈,Jeong, Hee-Don 대한기계학회 1996 大韓機械學會論文集A Vol.20 No.5

As recieved boiler tuve steel was aged artificially at $650^{\circ}C$ and$690^{\circ}C$ for various time duration to simulate the material deterioration which could be occurred during the operation of fossiol power plants. And the tensile tests, the microhardness tests and the characterization of carbides formed in the aging process were performed to asses the relationship between the mechanical properties and the effect of thermal aging. Furthernore, the amout of Mo-rich carbide were investigated by ondestructive method by noticing the fact that formation of Mo-rich carbide were investigated by ondestructive melthod by noticing the fact that formation of Mo-rich carbides($Mo_6C$) which stabilizes lastly affects the mechanical properties. It was known that the microhardness results of service exposed materials were similar to the ones which are aged at $650^{\circ}C$. The room temperature measurement showed small variation in the yield points and ultimate strength in materials aged at $650^{\circ}C$. Those properties at $540^{\circ}C$ showed the abrupt decrease compared with as received material even if short aging time. And it was found that $650^{\circ}C$ $690^{\circ}C$ aging cause different effects on mechanical properties, although the temperature time parameters(LMP;Larson-Miller parameter) are same. And it was concluded that the aigng at $650^{\circ}C$ is more appropriate to simulate the service exposed condition. Finally, the relationship between high temperature tensile properties and Ip values were established, which offers a potential way of reliability tests onthe power plant components.

Mod. 9Cr-1Mo강의 크리프 균열 성장 법칙의 파라메터 B와 q의 통계적 성질에 관한 연구

김선진(Seon Jin Kim),박재영(Jae Young Park),김우곤(Woo Gon Kim) 대한기계학회 2011 大韓機械學會論文集A Vol.35 No.3

본 연구는 차세대 원자로의 후보 재료인 수정 9Cr-1Mo 강에 대한 크리프 균열 성장률 법칙, da/dt=B(C<SUP>*</SUP>)<SUP>q</SUP> 의 파라메터 B와 q에 대한 통계적 성질에 대하여 취급하였다. 본 해석에 이용된 크리프 균열 성장 데이터는 600℃ 의 일정 온도에서 5000N의 동일 하중하의 1/2 CT 시험편에 대하여 크리프 균열성장 실험을 수행하였다. 크리프 균열 성장 거동은 크리프 균열 성장률 da/dt 와 파괴역학 파라메터 C<SUP>*</SUP>와의 실험적 관계식으로부터 통계적으로 해석하였다. 각각의 시험편에 대한 파라메터 B와 q는 최소자승법에 의하여 결정하였다. B와 q에 대한 확률분포함수를 정규분포, 대수정규분포 그리고 와이블분포에 대하여 조사하였다. 본 연구에 의하면, B와 q의 확률분포함수는 대수정규분포와 와이블분포에 비교적 잘 따름을 알았다. 또한 이들 사이에는 강한 양의 선형적인 상관이 있음을 알았다. This paper deals with the statistical properties of parameters B and q in the creep crack growth rate (CCGR) law, da/dt=B(C<SUP></SUP>*)<SUP>q</SUP>, in Mod. 9Cr-1Mo (ASME Gr.91) steel which is considered a candidate materials for fabricating next generation nuclear reactors. The CCGR data were obtained by creep crack growth (CCG) tests performed on 1/2-inch compact tension (CT) specimens under an applied load of 5000N at a temperature of 600℃. The CCG behavior was analyzed statistically using the empirical equation between CCGR, da/dt and the creep fracture mechanics parameter, C<SUP>*</SUP>. The B and q values were determined for each specimen by the least-squares fitting method. The probability distribution functions for B and q were investigated using normal, log-normal, and Weibull distributions. As far as this study is considered, it can be appeared that B and q followed the log-normal and Weibull distributions. Moreover, a strong positive linear correlation was found between B and q.

바크하우젠 노이즈에 의한 1Cr-0.5Mo 강의 열화도 평가

김민기(Min-Gi Kim),박종서(Jong-Seo Park),이윤희(Yun-Hee Lee),김철기(CheolGi Kim),유권상(Kwon-Sang Ryu) 한국자기학회 2011 韓國磁氣學會誌 Vol.21 No.4

Mechanical properties of degraded materials must be measured for evaluating the integrity of the facilities operating at high temperature. In fact it is complicated to obtain the different degraded specimens from an operating facility. Specimens of 1Cr-0.5Mo steel prepared by the isothermal heat treatment at 700 oC were tested, which has been widely used as tubes for heat exchangers and as plates for pressure vessels. The magnetic properties and Rockwell hardness (HRB) were measured at room temperature. The peak interval of Barkhausen noise envelope (PIBNE), coercivity, and hardness decreased with the increase of degradation. The magnetic and mechanical softening of matrix is likely to govern the properties of the specimen more than the hardening of grain boundary by carbide precipitations. The degradation of test material may be determined by the linear correlation of PIBNE and HRB. Degradation of 1Cr-0.5Mo steel could well be nondestructively evaluated by PIBNE measured with surface type probe.

전기비저항을 이용한 금속합금 열화도 평가기술

남승훈,유광민,류제천 한국비파괴검사학회 2001 한국비파괴검사학회지 Vol.21 No.5

재료의 노화에 의한 강도 및 인성 감소치를 정량적으로 평가하는 비파괴적 기법의 개발이 시도되고 있으며 전기비저항법도 그 중의 하나이다. 본 연구에서는 전기비저항법의 열화도 평가에의 적용성을 살펴보기 위해 먼저 6종 10 가지의 비자성 금속을 측정시료로 선택하여 직류 two-point probe법(혹은 2탐침법)으로 전기비저항을 계산한 결과와 비접촉식 와전류 방법으로 전기비저항을 측정한 결과를 서로 비교하였다. 또한, 1Cr-1Mo-0.25V강에 대하여 비파괴적 측정 방법인 four-point probe 방법(혹은 4탐침법)을 사용하여 얻은 결과와 기존의 2탐침법을 사용하여 얻은 결과를 서로 비교하여 현장에서의 4탐침 기술의 적용 가능성을 살펴보았다. 1Cr-1Mo-0.25V강에 대하여 2탐침법으로 구한 비저항값과 4탐침법으로 구한 비저항 측정값의 차이는 0.6%였다. 따라서 4탐침법을 사용하여 현장에서 금속소재의 열화도의 비파괴적 평가가 가능하다고 사료된다. Developments of nondestructive evaluation techniques for reduction of strength or toughness by aging of material have been carried out, and the method using electrical resistivity is one of them. In this study, to examine the application of electrical resistivity to the evaluation of the evaluation of degradation of metallic alloy, ten different non-magnetic materials were selected as test materials. Electrical resistivities measured by DC two-point probe method and those measured by non-contact type eddy current method were compared with each other. In addition, to examine the application possibility of four-point probe technology in field, the electrical resistivities for 1Cr-1Mo-0.25V steel measured by DC two-point probe method and four-point probe method were compared with each other. Differences between two measure values for the 1Cr-1Mo-0.25V steel were0.6%. Therefore, the four-point probe method can be applied to the estimation of the degradation of metallic alloy.ect.

원자로 압력용기용 Ni-Mo-Cr계 저합금강의 장기 가동에 따른 열적 안정성에 대한 실험적 고찰 (초)

박상규,김민철,이봉상,위당문 대한금속ㆍ재료학회 2009 대한금속재료학회 학술대회 개요집 Vol.2009 No.-

시효열화시킨 1Cr-1Mo-0.25V 강의 고온에서의 J$_lc$ 및 T$_mat$ 의 평가

윤기봉,윤석호,서창민,남승훈 대한기계학회 1994 대한기계학회논문집 Vol.18 No.11

When crack are detected in aged turbine rotors of power plants, information on fracture resistance of the aged material at operating temperature is needed for determination of critical loading condition and residual life of the turbine. In this study, fracture toughness (J$_lc$) and tearing modulus(T$_mat$) of virgin and thermally degraded 1Cr-1Mo-0.25V steel, which is one of the most widely used rotor steels, were measured at 538.deg. C according to ASTM E813 and ASTM E1152, respectively. Five kinds of specimen with different degradation levels were prepared by isothermal aging heat treatment at $630^{\circ}C.$ It was observed that J$_lc$ and T$_mat$ value decreased as the degradation level increased. Analysis of microstructures using a scanning electron microscope showed that the decrement of J$_lc$ is related to segregation of impurities at grain boundaries. It was also verified that the DC electric potential drop method is accurate and reliable for crack length monitoring at elevated temperature.