http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
- 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
- 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
RISS 인기검색어
- 검색키워드
- 주제어 : Nuclear fuel test rod(시험핵연료봉) (검색결과 4 건)
- 무료
- 기관 내 무료
- 유료
-
홍진태(Jintae Hong),허성호(Sung-Ho Heo),김가혜(Ka-Hye Kim),박승재(Sung-Jae Park),정창용(Chang-Young Joung) 대한기계학회 2014 大韓機械學會論文集A Vol.38 No.4
조사시험 도중 핵연료의 특성변화를 확인하기 위하여 원자로 수조내에 위치한 조사리그로부터 핵연료봉을 분리한 후 핫셀로 이송하여 중간검사를 진행한다. 또한 중간검사를 마친 핵연료봉은 원자로의 작업 수조로 이동시켜 조사리그에 재장착을 하게 되며, 재조립된 조사리그는 원자로 노심의 조사리그에 장착시켜 조사시험을 계속 진행한다. 그러나 중성자 조사가 진행된 핵연료봉은 높은 에너지의 방사선을 방출하기 때문에 작업자가 방사선에 피폭되지 않게 하기 위하여 핵연료봉 장탈착 공정은 원자로 작업수조수 내에서 이루어져야 한다. 특히 조사리그의 길이가 5.4 미터이고, 핵연료봉의 장탈착 작업이 이루어질 하나로 작업수조수의 깊이는 6 미터로 매우 깊어 장탈착 작업을위한 특수한 장치가 필요하다. 본 연구에서는 중간검사가 가능한 새로운 핵연료봉 조립체를 설계하고, 조사 핵연료봉 조립체의 장탈착용 툴을 개발하여 노외 성능시험을 통해 그 성능을 검증하였다. To check the characteristics of nuclear fuels during an irradiation test, the nuclear fuel rod needs to be disassembled from the test rig located in the pool of the research reactor. Then, the disassembled fuel rod is delivered to the hot cell for intermediate examination. A fuel rod that passes the intermediate examination is delivered to the reactor pool to be reassembled into the test rig. The irradiation test is resumed with the reassembled test rig. Because nuclear fuel rods irradiated by neutrons are highly radioactive, all the disassembly and reassembly processes should be carried out in the pool of the research reactor to prevent operators being exposed to radiation. In particular, because a test rig is 5.4-m long and the reactor pool of HANARO is 6-m deep, special tools need to be developed for performing the disassembly and reassembly processes. In this study, a new assembly design of nuclear fuel rods for intermediate examination is introduced. Furthermore, tools for treating the irradiated fuel rod assembly are introduced, and their performance is verified by an out pile test.
-
오비탈 TIG 용접시스템을 이용한 시험핵연료봉 봉단마개 용접기술 개발
정창용,홍진태,안성호,허성호,장서윤 한국기계기술학회 2015 한국기계기술학회지 Vol.17 No.4
To precisely assemble the fuel test rod, an orbital TIG welding system was designed and developed to accurately conduct orbital TIG welding for the nuclear fuel test rod. Using this system, a welding process needs to confirm the welding properties for orbital TIG welding. Therefore, preliminary weld tests were performed on the cladding tubes under various conditions, and the results show that the width and depth of HAZ of the cladding specimen welded using identical power during an orbital TIG welding cycle was continuously increased from a welded start-point to a welded end-point because of heat accumulation. The performance tests were conducted under the welding conditions considered through preliminary welding tests, and the properties of the specimens were conformed through surface and microstructure analyses.
-
오비탈 TIG 용접시스템을 이용한 시험핵연료봉 봉단마개 용접기술 개발
정창용,홍진태,안성호,허성호,장서윤 한국기계기술학회 2015 한국기계기술학회지 Vol.17 No.4
To precisely assemble the fuel test rod, an orbital TIG welding system was designed and developed to accurately conduct orbital TIG welding for the nuclear fuel test rod. Using this system, a welding process needs to confirm the welding properties for orbital TIG welding. Therefore, preliminary weld tests were performed on the cladding tubes under various conditions, and the results show that the width and depth of HAZ of the cladding specimen welded using identical power during an orbital TIG welding cycle was continuously increased from a welded start-point to a welded end-point because of heat accumulation. The performance tests were conducted under the welding conditions considered through preliminary welding tests, and the properties of the specimens were conformed through surface and microstructure analyses.
-
시험핵연료봉 헬륨가스 충진을 위한 TIG 점용접 장치 개발
정창용,홍진태,김가혜,허성호 한국기계기술학회 2014 한국기계기술학회지 Vol.16 No.6
To conduct a nuclear fuel irradiation test, the inside of the nuclear fuel rod must be assembled along with the test fuel, several different parts, and sensors, and then filled with high-pressure and high-purityhelium gas. Therefore, it is necessary to develop helium gas filling techniques that can achieve exact TIG (Tungsten Inert Gas) spot welding at a pin-hole of the nuclear fuel rod to fill helium gas into the nuclear fuel test rod. However, previous apparatuses do not have repeatability for TIG spot welding as they lack an electrode position control jig to exactly fix a TIG electrode in a high-pressure chamber, and they consume a large amount of helium gas. Therefore, a TIG spot welding apparatus was developed to easily and accurately conduct TIG spot welding and significantly reduce the gas consumption. In addition, the optimum welding conditions of this welding apparatus were established through various weld tests.
ScienceON
DBpia연관 검색어 추천
이 검색어로 많이 본 자료
활용도 높은 자료
