http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
보 붕괴형 메커니즘을 가지는 강구조 다층골조의 손상분포
오상훈,유홍식,문태섭 한국지진공학회 2005 한국지진공학회논문집 Vol.9 No.5
부재의 내력비, 강성비에 영향을 받는 다층 강구조 골조의 내진성능을 평가하기 위하여 내력비 및 강성비를 설계 파라메타로 하여 동적 비탄성 응답해석을 수행하였다. 해석 결과에 대한 분석을 통하여 내력비와 강성비의 변화폭이 큰 다층골조의 손상분포 예측식을 제안하였다. 본 연구에서 얻어진 결과는 다음과 같이 요약할 수 있다. 1) 보기둥 내력비 및 강성비가 작아질수록 1층의 기둥 주각부에서의 손상집중 현상이 크게 나타났다. 2) 보기둥 내력비 및 강성비를 고려하여 보붕괴형 강구조 다층골조의 손상분포를 예측할 수 있는 식을 제안하였으며, 예측식은 응답해석 결과와 좋은 대응을 보였다. 3) 본 연구에서 제안한 손상분포 예측식은 강접 및 반강접 보붕괴형 강구조 다층골조의 손상분포를 예측할 수 있을 것으로 판단된다. In order to evaluate the limit earthquake resistance of multi-story steel frames influenced by the strength and stiffness ratios of members, a series inelastic response analysis were carried out. From the analysis results, the damage distribution rules of multi-story steel frames were proposed. Conclusions are summarized as follows; 1)As the stiffness ratios of beam and column becomes small, the damage concentrates on the lower end of columns of the first story. 2) Considering the strength and stiffness ratios of the beam and column with weak beam type mechanism, the equations predicting the damage distribution of multi-story steel flames were proposed. 3) Through the equation which was supposed in this study, it is speculated that the damage distribution of the rigid or semirigid beam collapse type multi-story steel structure building can be predicted
플레이트형 에너지 흡수장치를 가지는 기둥-보 접합부에 관한 연구
오상훈,박해용,Oh, Sang Hoon,Park, Hae Yong 한국강구조학회 2013 韓國鋼構造學會 論文集 Vol.25 No.1
최근 지진동과 같은 강한 수평력 작용시 골조에 작용하는 대부분의 손상을 댐퍼부에 집중시키며 주부재의 재사용을 가능하게 하는 지속가능형 접합부 시스템에 관한 관심이 커지고 있다. 본 연구에서는 이러한 개념을 적용한 새로운 형태의 손상제어형 접합부 시스템을 제안하고 실물대 반복이력실험 및 비선형 유한요소해석을 통하여 제안 시스템의 주요 구조성능을 분석하였다. 분석결과를 통하여 주부재의 손상을 극소화하면서 보의 전소성모멘트 이상을 만족하는 최적의 댐퍼/보 내력비를 도출하였으며 내진접합상세로서의 적용가능성을 확인하였다. Recently, there is a growing interest on sustainable connection system that makes it possible to reuse of main structural members by concentrating most of the damage in the frame caused by strong horizontal force, such as earthquake, to damper. In this study proposed a new type of damage-controlled connection system applying these concepts and analysed the major structural performance of the proposed system through the full-scale cyclic loading test and nonlinear finite element analyses. According to the result, it derived the optimal damper/beam strength ratio that minimize the damage of main members and satisfy at least the fully plastic moment of the beam. And it was to verify the possibility of applying as seismic connection details.
손상제어 구조를 위한 보 단부 설치형 댐퍼의 내력 및 강성평가
오상훈(Oh, Sang-Hoon),박해용(Park, Hae-Yong) 대한건축학회 2017 大韓建築學會論文集 : 構造系 Vol.33 No.2
The target in this study is damage-controlled system with damper installed at beam end. This system should have different design method about strength and stiffness of the damper compared with the general parallel connection damping system(such as braces type or stud type etc.), because both arrangement formats of damper are different. However, the design method of damper installed at beam end is not yet available. And relevant internal and external researches have been limited mostly to the structural performance verification by the shape of the connection detail. Therefore, in this paper, it consider the available design value of damper installed at beam end through the analytical study. The purpose of this study is to present the design range of the damper/beam yield strength ratio and stiffness ratio, presented rationale is based on the performance efficiency of the damper and results of the damage analysis of the beam member. It conducted time history analysis to target the structure made up of the presented design range, to verify the validity of the proposed design value.
손상제어구조를 위한 보 단부 설치형 댐퍼의 최적 구조특성치에 관한 연구
오상훈(Oh, Sang-Hoon),박해용(Park, Hae-Yong) 대한건축학회 2016 대한건축학회 학술발표대회 논문집 Vol.36 No.2
The target in this study is damage-controlled system installed at beam end. Compared with the general braces type or stud-type damping system, this system, because the arrangement format of the damper are different, difference in the design method according to the strength and stiffness of the damper is it is determined that there is. However, still the relevant national and international research has been limited mostly to the structural performance verification by the shape of the connection detail. Therefore, in this paper, we consider the optimum design value of the damper installed at beam end through the analytical method. The purpose of the study is to present the optimal design range of the damper/Beam yield strength ratio and stiffness ratio, presented rationale is based on the performance efficiency of the damper and results of the damage analysis of the beam member. It conducted time history analysis to target the structure made up of the optimal design range, to verify the validity of the proposed design value.
복합강재 제진시스템으로 보강된 학교건축물의 비선형 동적해석에 따른 내진성능평가
김민성,김동건 대한건축학회지회연합회 2022 대한건축학회연합논문집 Vol.24 No.3
본 연구에서는 구조물의 내진성능을 향상시키고 면외좌굴을 방지하기 위해 저항복강(HSA80)과 탄소강(SS275)을 결합한 복합강재 제진시스템을 제안하였다. 저항복강으로 제작된 강재댐퍼와 탄소강으로 제작된 강재댐퍼의 항복내력비를 1, 1.5, 2로 상이하게 설정하여 3가지 경우에 있어서 복합강재 제진시스템을 제작하였다. 정적가력실험 및 유한요소해석을 수행하여 내력저하가 가장 적게 발생하는 복합강재 제진시스템을 선정하였다. 복합강재 제진시스템을 적용한 구조물의 내진성능을 검증하기 위해 학교건축물을 대상으로 비선형 동적해석을 수행하였다. 복합강재 제진시스템으로 보강된 학교건축물은 3가지 지진파에 대해서 층간변형각과 최상층변위응답이 감소된 결과를 보였다. 본 연구를 통해 제안된 복합강재 제진시스템은 안정적인 이력거동을 통해 우수한 에너지소산능력 발휘하였으며 전체적인 학교건축물의 내진성능을 향상시킨 것을 확인하였다.
손상제어 구조를 위한 보 단부 설치형 댐퍼의 내력 및 강성평가
오상훈,박해용 대한건축학회 2017 대한건축학회논문집 Vol.33 No.2
The target in this study is damage-controlled system with damper installed at beam end. This system should have different design method about strength and stiffness of the damper compared with the general parallel connection damping system(such as braces type or stud type etc.), because both arrangement formats of damper are different. However, the design method of damper installed at beam end is not yet available. And relevant internal and external researches have been limited mostly to the structural performance verification by the shape of the connection detail. Therefore, in this paper, it consider the available design value of damper installed at beam end through the analytical study. The purpose of this study is to present the design range of the damper/beam yield strength ratio and stiffness ratio, presented rationale is based on the performance efficiency of the damper and results of the damage analysis of the beam member. It conducted time history analysis to target the structure made up of the presented design range, to verify the validity of the proposed design value.