김치유래 젖산균의 균체지방산 분석을 이용한 분류학적 연구

이정숙,정민철,김우식,이근철,김홍중,박찬선,이헌주,주윤정,이근종,안종석,박완,박용하,민태익 한국미생물생명공학회 ( 구 한국산업미생물학회 ) 1996 한국미생물·생명공학회지 Vol.24 No.2

표준균주를 포함한 230여개의 김치유래 젖산균에 대한 균체지방산(FAMEs)을 분석하였다. FAMEs profiles는 Euclidian Distance 17.5에 의해 7개의 Major Cluster와 1개의 Single Cluster로 나뉘어졌다. 이중 A, B, C 및 Cluster는 Leuconostoc속으로 분석되어졌고, F는 Lactobacillus속으로 분석되어졌다. 그리고 E와 G cluster는 두개의 Genus가 혼재되어 나타났으며 보충적인 연구가 필요하다. 앞으로 김치유래 젖산균의 균체지방산 분석결과를 기반으로 한 데이타베이스에 95가지 탄소원을 이용하는 수치분류학적 접근방법 및 Pyrolysis Mass Spectrometry 등의 화학적 분석 방법과 분자친화적 연구를 통한 종합적 분류정보 체계가 갖추어지면 젖산균의 신속, 정확한 동정 및 연구에 활발히 이용되어질 것이다. Two hundreds and thirty lactic acid bacteria, mostly isolated from Kimchi, including type strains were sued for analysis of cellular fatty acids. The 230 test strains were recoverd in 7 major and 1 single clusters defined a Euclidian distance of 17.5. These aggregate taxa were equivalent to the genus Leuconostoc (aggregate group A, B, C and D), and the genera Leuconostoc and Lactobacillus (aggregate group G). It is concluded as evident that FAMEs (Fatty Acid Methyl Esters) profile of cell can be used as a criterion in classification of lactic acid bacterial from kimchi. Additional comparative taxonomic studies need to be carried out on well chosen representative strains to determine the most appropriate methods of value.

飼料資源開發을 위한 雜灌木樹葉의 飼料價値와 韓牛의 放牧利用에 關한 硏究

尹益錫,陸完芳,李仁德,曺圭燉,金炯基 건국대학교 1978 學術誌 Vol.22 No.1

As a part of forestry utilization for livestock feed resources the feeding value ague of shrub leaf by growth stage and grazing behabiour of the native cattle at shrubby grassland in function of seasons were investigated and the following results were obtained. 1. The crude protein content of oak leaf declined as the growth stage increased whereas the contents of crude fiber and crude fat showed the opposite tendency. 2. The intake of oak leaf paralleled with the amount given while the intake of the mixed grass leas remarkable increased and the body weight gain was also remarkably increased. 3. The average number of oak leaf intake was 70.5 times for spring, 148.7 for summer, and 395.7 for autumn. 4. The grazing time by the native cattle was decreased in the order of spring, autumn, and summer. As for the grazing behaviour, the intake activity was most active during morning, mid-day and late afternoon or three times a day. 5. The duration of rumination was found to be in the decreasing order or summer, autumn and spring, cattles ruminated more when the grasses were more abundant. 6. As for the inactive period of animal, it was short during spring when the animals spent more time for eating but it was about 5 times longer during both summer and autumn.

철골커플링 보의 비탄성 이력거동의 해석기법의 제안 및 복합 병렬전단벽구조의 비선형 해석

이주화,박완신,윤현도 대한건축학회 2003 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.23 No.1(구조계)

Ductile coupled flexural walls are the primary seismic load resisting systems of many structures. The coupling beams of these structures must exhibit excellent ductility and energy absorption ability. To achieve better ductility and energy absorption than previously possible, the use of steel coupling beams with their ends embedded in the reinforced concrete walls is proposed. But the present analytical method about behavior of steel coupling beam was scarcely anything. This paper composed of two subjects. First subject is a suggestion of analytical method of steel coupling beam, and selected 5 specimens for that. Second subject is a comparison of Seismic performance with RC coupling beam. This paper used IDARC-2D program for the purpose of achievement these subjects. Suggested analytical method expe3cted that it showed good agreement with steel coupling beam inelastic behavior. Comparison result showed that Steel Coupling beams replacing reinforced concrete coupling beams represent a viable structural system.

신부전이 동반된 당뇨병 환자에서 발생된 침습성 모균증 : 수술과 Liposomal amphotericin B 및 GM-CSF 병합 요법에 의한 성공적인 치험 1예

이원영,오기원,임국희,장재혁,이동건,최정현,강무일,신완식,차봉연,이광우,손호영,강성구 대한화학요법학회 1999 대한화학요법학회지 Vol.17 No.4

저자들은 신부전이 동반된 당뇨병 환자에서 발생된 부비동형 모균증에 대하여 수술과 함께 liposomal amphotericin B 및 GM-CSF의 복합치료를 하여 성공적으로 치료한 1예를 경험하였기에 문헌 고찰과 함께 보고하는 바이다. Mucormycosis (zygomycosis) primarily affects diabetic or immunocompromised patients and typically progresses rapidly, necessitating surgical excision and antifungal therapy with amphotericin B. Large doses of amphotericin B are needed for cure, but it has the risk of causing significant renal toxicity. The recent development of liposomal amphotericin B allows antifungal therapy to be administered with potentially improved efficacy and reduced nephrotoxicity. We have experienced a case of paranasal mucormycosis successfully treated with surgery, liposomal amphotericin B and GM-CSF. A 59-year-old male suffering from diabetes mellitus for 6 years was admitted with pain at left maxillary area. He was diagnosed as mucormycosis after cytologic exam on the necrotic nasal mucosa, which showed typical hyphae. He have had diabetic nephropathy with macroproteinuria and had rapidly rising serum creatinine levels with the amphotericin B treatment: creatinine levels reverted to basal level with the use of liposomal amphotericin B. Despite surgical excision and continued antifungal therapy, his infection was not effectively controlled. Therefore, GM-CSF was administered additionally to improve phagocytic activity of leukocytes. He was finally cured after receiving a combination of aggressive surgery, liposomal amphotericin B and GM-CSF. To our knowledge, this is the first detailed clinical description of the treatment of mucormycosis with liposomal amphotericin B in Korea.

퍼지 환경하에서 유연생산시스템 일정계획의 Pairwise 해법에 관한 연구

이상완,신대혁,윤연근,박병주 동아대학교 공과대학부설 생산기술연구소 1996 生産技術硏究所硏究論文集 Vol.1 No.2

FMS(Flexible Manufacturing System) scheduling problem is a complex system and a NP-hard problem. Thus it is natural to look for heuristic method. Here, we consider the multi-part production scheduling problem in a FMS scheduring of altemative routings. The problem in more complex if the processing time is imprecision. It requires suitable method to deal with imprecision. Fuzzy set theory can be useful in modeling and solving scheduling problems with uncertain processing times. Lee-Ki fuzzy number comparison method will be used to compare processing times that evaluated under fuzziness. This study propose heuristic algorithm solving FMS scheduling problem under fuzzy environment. In this algorithm, the pairwise comparision method is used to find proper alternative routing. On the basis of the proposed method, and example in presented.

동종골수이식 후 혈당 및 혈중 지질농도의 변화양상 및 관련인자

이원영,강무일,오은숙,오기원,손현식,윤건호,차봉연,이광우,손호영,강성구,신완식,민우성,김춘주 대한당뇨병학회 2002 Diabetes and Metabolism Journal Vol.24 No.6

연구배경:골수이식은 비교적 젊은 연령의 환자들을 대상으로 하며 면역억제제의 사용기간이 비교적 짧으므로, 주로 고령의 만성 질환 환자에서 시행되는 고형장기이식에서와는 달리 당대사 및 지단백 대사에 있어서 많은 차이점이 있을 것으로 추측된다. 저자들은 전향적 연구를 통하여 골수이식 후 시기별로 혈당 및 혈중지단백 변화 양상을 알아보고 이와 관련된 임상인자들을 규명하고자 하였다. 방법:1998년 10월부터 1999년 8월까지 가톨릭대학교 성모병원에서 동종골수이식을 시행한 환자들 중 43명을 대상으로 이식 전 및 이식 후 1, 2, 3, 4주와 3개월, 6개월에 공복 혈당, 혈중 총 콜레스테롤, 중성지방, 고밀도지단백을 측정하여 골수이식 후 시기별 변화를 관찰하고 여러 임상인자들에 따른 차이를 알아보았다. 결과:1. 공복혈당은 골수이식 수 첫4주 동안 상승하였고 이후 감소하였으나 이식 6개월 시점의 평균 공복혈당은 이식 전보다 유의하게 높게 관찰되었다. 혈중 총 콜레스테롤은 이식 후 1주에 최고치를 형성하였고 이후 기저수준으로 회복되었다가 이식 수 3,6개월에 다시 증가하여 기저치에 비해 유의하게 높았다. 혈중 중성지방은 이식 후 1개월까지 유의하게 증가하였고 이후 감소하여, 3,6개월에는 기저치와 유의한 차이가 관찰되지 않았다. 혈중 고밀도지단백은 이식 후 2,3주에 이식 전보다 유의하게 감소하였고 이후 이식 전 수준으로 회복되었다. 혈중 저밀도지단백은 총 콜레스테롤의 변화와 매우 유사하였다. 2. 골수이식 후 6개월 시점에서 공복 혈당이 126㎎/dL이상인 환자는 7명(16%)이었다. 이들 환자들과 공복혈당 126㎎/dL 미만의 환자 36명을 비교한 결과, 공복혈당이 126㎎/dL 이상인 환자군에서 스테로이드 평균 투여량이 많았고 고밀도지단백이 유의하게 낮았다. 3. 이식편대숙주질환이 발생한 환자는 그렇지 않은 환자보다 이식 후 1, 2, 3주 및 6개월의 총 콜레스테롤이 더 낮았고, 3개월의 공복혈당이 더 높았다. 혈연골수이식 환자군은 비혈연골수이식 환자에 비해 투여된 스테로이드 용량이 더 적음에도 불구하고 이식 후 1, 2, 3주 및 6개월의 총 콜레스테롤 수치가 더 높았다. 스테로이드 고용량 투여군(하루 평균 7.5㎎기준)은 저용량군보다 이식 후 3개월 시점의 공복혈당이 더 높았으나 나머지 시점의 혈당, 혈중 지질농도에 있어서는 유의한 차이가 관찰되지 않았다. 결론:골수이식 후 초기시기에 주로 당 대사 및 지질대사이상이 관찰되며 이는 면역억제제 투여와 관련이 있음을 알 수 있었다. 면역억제제가 고용량 투여되는 합병증 발생 시 이들 대사이상에 관심을 기울여 대처해야 할 것이다. Background: In bone marrow transplantation(BMT), recipients are usually younger and immunosuppressants are open used in shorter period than in solid organ transplantation. Therefore, there might be a difference in glucose and lipid metabolism between BMT and solid organ transplantation. However, the serial changes of metabolic parameters following BMT have not been studied. Therefore, the aim of this study is to investigate the serial changes of blood glucose, lipids and the putative factors that are related with these changes after BMT. Methods: We have prospectively investigated 43 patients who underwent allogeneic BMT. Fasting plasma glucose(FPG), total cholesterol, triglyceride and high-density lipoprotein(HDL) were measured before BMT, and at 1, 2, 3, 4, 12 weeks and 6 months after BMT. The serial changes of these metabolic parameters according to clinical factors including type of BMT, mean daily steroid dosage, and occurrence of graft versus host disease (GVHD) were examined. Results: 1. Mean FPG level increased during 4 weeks after BMT and remained above basal value at post-transplant 6 months. Total Cholesterol level was increased during initial 4 weeks after BMT and was above basal value at post-BMT of 3 and 6 months. Triglyceride level was progressively increased during initial 4 weeks after BMT, but returned to basal value there after. HDL-cholesterol level was significantly decreased during initial 4 weeks after BMT, but returned to basal value there after. 2. Patients with FPG above 126 mg/dL and the other patients, the former received larger amounts of daily steroid and had lower HDL-cholesterol level. 3. The changes of metabolic parameters were different according to type of BMT, steroid dose, and occurrence of GVHD. Conclusion: Although there was increase of FPG, TC, TG and decrease of HDL-C during initial 4 weeks after BMT, these metabolic changes recovered slowly thereafter. Immunosuppressants are thought to be associated with these changes. Further observation will be needed for the long-term effect of BMT on metabolic changes(J Kor Diabetes Asso 24:689~698, 2000).

전침 자극에 의한 오디 괄약근 운동성 변화에 관한 연구

이성구,김명완,김홍자,서동환,이상수,김동일,유교상,주연호,민병일,김지훈 경희대학교 동서의학연구소 2001 東西醫學硏究所 論文集 Vol.2000 No.-

Background/Aims: This study was designed to evaluated the effects of electroacupuncture on the sphincter of Oddi (SO) motility in humans and to correlate the manometric findings with plasma cholecystokinin (CCK) levels. Methods: Eleven patients (M: F= 5: 6) who had various kinds of biliary disorders were enrolled. SO motility was monitored with a conventional low-compliant continuously perfused technique using ERCP (n=9) or percutaneous transhepatic cholangioscope (n=2). After baseline monitoring for phasic wave contractions of SO, electroacupuncture was applied at a specific acupoint, GB 34, in these 11 patients. A nonspecific acupoint 5 cm away from GB 34 was selected as a control. Manometric parameters of SO were also checked in 6 subjects during stimulation of the control acupoint. CCK plasma levels were measured during the time course of electroacupuncture stimulation. Result: All the manometric parameters including the basal pressure of SO, amplitude, frequency and duration of phasic wave contraction of SO were significantly decreased (p< 0.05) during electroacupuncture stimulation. The inhibition of SO contractility was accompanied by increased CCK plasma levels. After removal of electroacupuncture stimulation, restoration of amplitude and duration to basal condition were noted. A tendency towards the return of SO contractility was also observed in basal pressure and frequency. Stimulation of the control acupoint, however, did not affect the SO contractility and plasma CCK levels. Conclusions: Electroacupuncture stimulation of acupoint GB 34 showed reversible inhibition of SO contraction in humans. We speculate that the response of SO to electroacupuncture stimulation may be mediated by some neurohormonal mechanisms including CCK release. (Korean Journal of Gastrointestinal Motility 2000;6:44-41)

철근콘크리트 커플링 보의 해석기법과 병렬 전단벽의 거동 비교

이주화,박완신,윤현도 대한건축학회 2003 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.23 No.2(구조계)

Ductile coupled flexural walls are the primary seismic load resisting systems of many structures. The coupling beams of these structures must exhibit excellent ductility and energy absorption ability. But the present analytical method about nonlinear behavior of reinforced concrete coupling beam scarcely anything. This paper composed of two subjects. First subject is a suggestion of analytical method of diagonally reinforced concrete coupling beam and longitudinally reinforced concrete coupling beam and rhombic coupling beam, and selected 5 specimens for that. Second subject is a comparison of seismic behavior of fully coupled shear wall and partially coupled shear wall. This paper used lDAHC-2D and Midas Gen 4.3.1 for the purpose of achievement these subjects. Suggested analytical method expected that it showed good agreement with reinforced concrete coupling beam inelastic behavior. Also, comparison of seismic behavior result showed that fully coupled shear wall have good behavior than partially coupled shear wall.

복합 병렬 전단벽 접합부의 전단강도

박완신,한병찬,황선경,윤현도,이재연,이원호 대한건축학회 2004 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.24 No.1(구조계)

An theoretical study of the strength of hybrid coupled shear wall connections is achieved. The bearing stress at failure in the concrete below the steel coupling beam section is related to the concrete compressive strength and the ratio of the width of the steel coupling beam section to the width of the hybrid coupled shear wall. Also experimental studies are achieved to revise shear transfer strength across connections between coupled shear walls and steel coupling beam. The main test variables were auxiliary details of stud bolts. In this studies. these proposed equations are shown to be in good agreement with the test results reported in the paper and with other test data in the literature.

마이크로 가스센서의 열해석

정완영,이상윤,임준우,이덕동 경북대학교 센서기술연구소 1998 센서技術學術大會論文集 Vol.9 No.1

Thermal analyses for typical stack-type and newly proposed planar-type micro-gas sensors were accomplished. The thermal analyses for the proposed planar structure including temperature distribution over the sensing layer and power consumption of the heater were carried by finite element method and well compared with those of typical stack-type micro-gas sensor. The thermal properties of the microsensor from thermal simulation were tested to investigate the applicability of the heater to a real device.