http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
텔레스코픽 크라운 임플란트 지지 피개의치와 치아 지지 피개의치의 하악골내 응력분포에 관한 유한요소분석
이창규,백장현,김태훈,김민정,김형섭,권긍록,우이형 대한치과보철학회 2012 대한치과보철학회지 Vol.50 No.1
PURPOSE. The purpose of this study was to investigate the stress distribution in mandibular implant-supported overdentures and tooth-supported overdentures with telescopic crowns. MATERIALS AND METHODS. The assumption of this study was that there were 2, 3, 4 natural teeth and implants which are located in the second premolar and canine regions in various distributed conditions. The mandible, teeth (or implants and abutments), and connectors are modeled, and analyzed with the commercial software, ANSYS Version 10.1. Stress distribution was evaluated under 150 N vertical load bilaterally on 3 experimental conditions - between canine areas, canine and 2nd premolars, 10 mm posterior to 2nd premolars. RESULTS. Overall, the case of the implant group showed more stress than the case of the teeth group in stress distribution to bone. In stress distribution to superstructures of tooth and implants, there was no significant difference between TH group and IM group and the highest stress appeared in TH-IV and IM-IV. The stress caused from bar was much higher than those of implant and tooth. TH group showed less stress than IM group in stress distribution to abutment teeth and implant. CONCLUSION. The results shows that it is crucial to make sure that distance between impact loading point and abutment tooth does not get too far apart, and if it does, it is at best to set abutment tooth on premolar tooth region. It will be necessary to conduct more experiments on effects on implants, natural teeth and bone, in order to apply these results to a clinical treatment. 연구 목적: 이 연구의 목적은 텔레스코픽 크라운 하악 임플란트 지지 피개의치와 치아 지지 피개의치에서 지대치의 수와 위치에 따른 응력 분산을 비교하기 위함이다. 연구 재료 및 방법: 본 연구에서는 임플란트를 4개 식립하고 임플란트 지지 피개의치로 설계하였고, 식립 위치를 견치와 소구치 부위에 위치 별로 3개 또는 2개 존재시를 실험군으로 설정하였다. 자연치아를 갖는 경우도 견치와 제2소구치 4개를 가진 경우를 대조군으로 설정하고 부위별로 3개 또는 2개를 가지는 경우를 실험군으로 설정하였다. ANSYS Version 10.1 (Swanson, Inc., USA)로 분석하였다. 결과: 악골내 응력의 경우, 전반적으로 임플란트(IM)로만 구성된 경우가 치아(TH)로만 구성된 경우에 비해 응력이 크게 발생하였다. 상부구조의 경우, 치아군(TH)과 임플란트군(IM) 사이의 차이는 크게 없었으며 편측 견치와 제2소구치에 지대치 또는 임플란트가 위치하는 경우 가장 큰 응력이 나타났고 바(bar)에서 발생된 응력이 임플란트와 치아에서 발생되는 응력에 비해 상대적으로 훨씬 크게 발생하였다. 지대치와 임플란트의 경우, 치아군(TH)이 임플란트군(IM)보다 응력이 작게 발생하였다. 결론: 본 연구의 결과로부터 지대치(임플란트 또는 치아)를 설정할 때는 하중작용점과 지대치 사이의 거리가 너무 길어지지 않도록 지대치의 수와 위치를 확보해야 하며 소구치 자리에 지대치를 확보하는 것이 유리하다. 앞으로, 실제 임상에 적용하였을 경우, 임플란트 및 자연치아와 악골에 미치는 결과에 대한 연구가 더 필요할 것으로 생각된다.
정성문 · 정지미 · 이규용 · 김건우 · 김권호 · 박수정 · 양태완 · 지준영 · 이우평 신라대학교 부산학연구센터 2020 부산연구 Vol.18 No.2
본 연구는 부산지역의 주요기업 변화를 살펴보기 위해 매출액 기준 전국 상위 1,000대 기업에 속하는 부산기업을 조사하여 비교분석을 실시하였다. 분석결과 2005년에 전국 1,000대 기업 중 46개 기업이 부산에 소재하였는데, 2019년에는 12 개가 줄어든 34개 기업만이 전국 1,000대 기업에 포함되었다. 또한, 전국 상위 1,000대 기업의 매출액 기준으로 부산지역 기업의 매출액 비중은 2005년 1.6%에서 2019년 1.4%로 줄어든 것으 로 나타났다. 이는 수도권 집중현상이 점차 강화되고 있기 때문이다. 한편, 부산지역 매출액 기준 상위 10대 기업은 많은 변화가 있었는데, 2005년 상위 10대 기업 중 2019년에도 상위 10대 기 업에 포함된 기업은 ㈜한진중공업, 르노삼성자동차(주), ㈜부산은행, ㈜서원유통 등 4개뿐인 것 으로 나타났다. 통계적 인과 관계는 확정할 수 없으나 지역 대기업의 쇠퇴 및 유출과 지역의 쇠퇴가 동시에 이루어지고 있어 지역 경제의 침체와 대기업의 쇠퇴 및 유출이 상당한 관계가 있음을 유추해 볼 수 있다. 특히 2011년 이후 지역 주력 제조업 기업들이 1000대 기업 진입에 실패하였다는 점을 주목해 볼 필요가 있다. 지역 제조업 대기업의 이탈 또는 쇠퇴는 지역 생산성 하락에 영향을 미 쳤을 가능성이 높고, 낮아진 지역 산업 생산성이 지역 경제성장률 둔화에도 영향을 미칠 가능성 이 있다. 따라서 지역의 경제활력 저하 문제를 제고하기 위해서는 지역 산업구조 개편 문제와 생 산성 향상 방안에 대한 고민이 필요하다.
고려엉겅퀴와 큰엉겅퀴의 모상근 유도 및 methyl jasmonate 처리에 따른 HPLC 패턴 변화
Tae Gyu Yi,Jong Dai Son,Yeri Park,Byung Hun Um,Nam Il Park 한국약용작물학회 2017 한국약용작물학술대회 발표집 Vol.2017 No.05
Background : Cirsium plants have been used for perennial edible plants and grow wild in the mountainous regions of Korea, including Cirsium setidens and C. pendulum. In particular, C. setidens is commonly called 'gondre', and it has been used medicinally for diseases such as hematuria, hepatitis and hypertension. Hairy roots cultivation can be used as a method for increasing production through mass culture of medicinal plants, and elicitors such as methyl jasmonate (MeJa) can be treated to increase the content of certain useful ingredients. In this study, the hairy root was derived from the leaf tissues of C. setidens and C. pendulum, and the HPLC pattern was compared by MeJa treatment. Methods and Results : Agrobacterium rhizogenes R1000 was used to induce hairy roots in 1/2× MS medium. In addition, the hairy roots was treated with MeJa for different time (0, 1, 2, 5, 10, 24, 48, 72 h) and with various concentrations (0, 10, 50, 100, 200, 300 μM). The HPLC pattern changes were analyzed by on-line HPLC-ABTS. Four new peaks were observed in both Cirsium setidens and C. pendulum hairy roots, all of which showed antioxidant activity. In the case of C. pendulum, chlorogenic acid content was about 4 times higher than that of leaves. These peaks, including chlorogenic acid, were all affected by MeJa treatment. Conclusion : Four peaks were detected in the hairy roots of C. setidens and C. pendulum not in the leaves, and they were confirmed to be affected by the treatment of MeJa. It is necessary to clarify the structure through the subsequent compound separation.