http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
황순호 ( Soonho Hwang ),강문성 ( Moonseong Kang ),송인홍 ( Inhong Song ),송정헌 ( Junghun Song ),안지현 ( Jihyun Ahn ),박지훈 ( Jihoon Park ) 한국농공학회 2012 한국농공학회 학술대회초록집 Vol.2012 No.-
현재까지 여러 포장을 단위로 하는 광역단위 논의 비점오염에 관한 연구는 강우사상별 모니터링 연구보다는 주로장기 유출 모니터링이 많이 이루어져왔다. 특히, 포장단위 논의 경우 비점오염 유출은 관개시뿐만 아니라 강우시 물꼬높이를 초과하여 유출이 발생할 경우에도 이루어진다. 또한 장기간 관개시의 유출특성과는 달리 강우시 비점오염 유출농도 특성은 초기세척효과 (first flush effect)에 의하여 초기에 높고 시간이 지날수록 낮아지며, 동일한 유역에서도 강우특성에 따라 비점오염 유출 농도가 달라지기도 한다. 따라서, 포장단위 논에서의 장기 유출 모니터링뿐만 아니라 강우시 초과 유출되는 유출수에 대한 비점오염 연구 역시 필요하다고 할 수 있다. EMC (Event Mean Concentration)는 강우사상에 따른 유출 오염물질 농도를 나타내는 대표적인 방법으로 유량을 가중평균하는 방법이다. 본 연구의 목적은 광역단위의 저수지 관개논을 대상으로 강우 사상별 유출 특성을 조사하고, 강우사상별 EMC를 산정하여 강우량, 강우강도 등 강우특성과의 상관분석과 강우사상별 비점오염 부하량을 산정하는 것이다. 기간 2011년 5월-7월 사이의 총 10개 강우사상에 대하여 조사한 결과 대상 강우사상의 평균 강수량은 46.7 mm였으며, 평균강우지속시간은 27.3 시간, 평균강우강도는 1.45 mm/hr로 나타났다. 수질항목의 평균 EMC는 SS가 242.4 mg/L, TN이 1.01 mg/L, TP가 0.12 mg/L로 나타났다.
DMA 내 막대형 시스 유동 층류화 장치에 의한 샘플 유동 정렬 및 입자 분류 효율 향상
송현우(Hyunwoo Song),이상면(Sang-Myun Lee),김용준(Yong-Jun Kim),송준호(Soonho Song) 대한기계학회 2020 大韓機械學會論文集B Vol.44 No.4
경제성을 고려한 독자적인 설계로 제작된 DMA의 시스 흐름 층류화 장치 장착에 따른 입자 분류 효율 개선에 대하여 연구하였다. DMA는 평행판형 구조를 채택하여 제작되었고, 넓은 목표 입경 범위를 충족하기 위해 높은 에어로졸/시스 유량비를 사용하였다. 시스 흐름 층류화 장치는 유로 내 중심선 상에 수직으로 위치한 원기둥형 막대 모양이며, 간단한 CFD를 통해 에어로졸 흐름 정렬도 향상을 목표로 최적화하였다. 연구 결과, 층류화 장치가 장착되었을 때 유로 상단 벽 방향으로의 에어로졸 흐름 정렬도가 크게 개선된 것을 확인하였다. 시스 층류화 장치로 인한 에어로졸 흐름 정렬 개선이 실제로 입자 분류 효율에 미치는 영향을 검증하기 위해 실험을 수행하였고, 200nm 단분산 입자 샘플과 1:5의 에어로졸/시스 유량비 조건에서 91.1%의 분류 효율 향상이 관찰되었다. The improvement in particle classification performance of a differential mobility analyzer (DMA), based on an original cost-effective design, was investigated using a simple sheath flow laminarizing structure. The DMA was designed as a parallel-type, and was used with high aerosol/sheath flow ratios to achieve a wide particle diameter range. The sheath flow of the laminarizing structure consisted of a vertical rod located at the center of the flow channel. A computational fluid dynamics (CFD) optimization was performed for enhancing aerosol flow alignment. With the flow laminarizer, the aerosol flow alignment toward the channel upper wall significantly improved. Subsequently, experiments were performed to examine the effects of the sheath flow laminarization and aerosol flow alignment on the particle classification performance of the DMA. As a result, the classification efficiency increased by 91.1, with a 200 nm particle sample and aerosol/sheath flow ratio of 1:5.
Model soot이 Pt/CeO₂ 촉매와 tight contact한 상태에서의 O₂에 의한 산화특성 연구
송창훈(Changhoon Song),이동일(Dongil Lee),김태수(Taesoo Kim),송순호(Soonho Song),전광민(Kwang Min Chun) 한국자동차공학회 2009 한국자동차공학회 부문종합 학술대회 Vol.2009 No.4
The catalytic behaviors of Pt/CeO₂ have been studied for soot oxidation by O₂. Oxidation of soot (carbon black) is studied using a flow reactor system simulating the condition of diesel exhaust. In this study, the temperature programmed oxidation (TPO) scheme is used. And soot oxidation rate is evaluated by monitoring both CO and CO₂ concentrations. Pt/CeO₂ catalyst shows promising performance to accelerate the soot-O₂ reaction. Under tight contact condition with catalyst, soot oxidation reaction occurred more actively. The maximum soot oxidation temperature is decreased by about 150℃. The main reason that causes the increase of soot oxidation activity is the active oxygen from cerium oxide.