http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Features and Properties of $YBa_2$$Cu_3$$O_{7-x}$ Films Grown on SrTi$O_3$ by High Frequency PLD
Shi, D.Q.,Ko, R.K.,Song, K.J.,Chung, J.K.,Choi, S.J.,Park, Y.M.,Shin, K.C.,Yoo, S.I.,Park, C. The Korean Superconductivity Society 2003 Progress in superconductivity Vol.5 No.1
YBCO films were deposited with various thicknesses from 100nm to 1.6$\mu\textrm{m}$ on single crystal $SrTiO_3$ substrates by pulsed laser deposition (PLD). The effects of different deposition conditions, especially different deposition rates by means of changing the pulsed laser frequency up to 200Hz, on the J$_{c}$ value were studied. For YBCO film with the thickness of 200nm, the $J_{c}$ value of $2.1MA/\textrm{cm}^2$ has been achieved under the high deposition rate of 3.2nm/s (190nm/min). The $J_{c}$ can be maintained greater than $1M/\textrm{cm}^2$ with the thickness less than 1$\mu\textrm{m}$. The X-ray analysis was used to examine the texture, crystallization and surface quality. The SEM was employed to analyze the surface of YBCO, and it was shown the surface of YBCO film became rougher with increasing the thickness. There were many large singular outgrowths and networks of outgrowths on the surface of YBCO films which lowered the density of thick YBCO film. The outgrowth network was probably the a-axis YBCO corresponding to XRD $\theta$-2$\theta$scan and $\chi$-scan which were used to characterize a-axis orientation of YBCO film. The reason for J$_{c}$ declining with increasing the thickness was studied and discussed.sed.
Zhao, K.J.,Nagashima, Y.,Li, F.M.,Shi, Yuejiang,Diamond, P.H.,Dong, J.Q.,Itoh, K.,Itoh, S.-I.,Zhuang, G.,Liu, H.,Chen, Z.P.,Cheng, J.,Nie, L.,Ding, Y.H.,Hu, Q.M.,Chen, Z.Y.,Rao, B.,Cheng, Z.F.,Gao, L. IOP 2017 Nuclear fusion Vol.57 No.12
<P>The temporal-spatial structures of plasma flows and turbulence around tearing mode islands are presented. The experiments were performed using Langmuir probe arrays in the edge plasmas of J-TEXT tokamak. The correlation analyses clearly show that the flows have similar structures of <I>m</I>/<I>n</I> = 3/1 as the magnetic island does (<I>m</I> and <I>n</I> are the poloidal and toroidal mode numbers, respectively). The sign of the potential fluctuations for the flows inverses and the powers significantly reduce at <I>q</I> = 3 surface. Approaching to the last closed flux surface for the magnetic islands, the radially elongated flow structure forms. The flows are concentrated near separatrix and show quadrupole structures. The turbulence is concentrated near X-point and partly trapped inside the magnetic islands.</P>
Enhanced energy storage properties in PbZrO3 thin films via the incorporation of NiO
Wang X.W.,Chen J.Y.,Hu S.Y.,Yu K.X.,Yang F.,Shi Y.J.,Li J.H.,Hou M.Z.,Liu A.D.,Zheng M.M.,Yin S.Q.,Hu Y.C.,Shang J. 한국물리학회 2023 Current Applied Physics Vol.52 No.-
In this study, NiO–PbZrO3 composite films were deposited on SiO2/Si substrates buffered with LaNiO3 films via the sol-gel coating technique. The effects of NiO addition in PZO thin films on the microstructure, dielectric properties, leakage mechanism, ferroelectric properties and energy storage properties have been discussed. The dielectric constant increased with the addition of NiO, while the leakage current density decreased. Compared with pure PZO films, the maximum polarization of the composite films was improved. For the composite films prepared using the NiO precursor solution with 0.05 mol/L, the recoverable energy storage density of the NiO-PZO composite film is up to 19.6 J/cm3 under the electric field of 1038 kV/cm, which is 30% higher than that of the pure PZO film under the same conditions. Also, the energy storage efficiency of the composite film reaches 48%. Accordingly, we demonstrate a simple and convenient method by adding NiO to fabricate thin films with high energy storage performance.
Response of plasma rotation to resonant magnetic perturbations in J-TEXT tokamak
Yan, W,Chen, Z Y,Huang, D W,Hu, Q M,Shi, Y J,Ding, Y H,Cheng, Z F,Yang, Z J,Pan, X M,Lee, S G,Tong, R H,Wei, Y N,Dong, Y B IOP 2018 Plasma physics and controlled fusion Vol.60 No.3
<P>The response of plasma toroidal rotation to the external resonant magnetic perturbations (RMP) has been investigated in Joint Texas Experimental Tokamak (J-TEXT) ohmic heating plasmas. For the J-TEXT’s plasmas without the application of RMP, the core toroidal rotation is in the counter-current direction while the edge rotation is near zero or slightly in the co-current direction. Both static RMP experiments and rotating RMP experiments have been applied to investigate the plasma toroidal rotation. The core toroidal rotation decreases to lower level with static RMP. At the same time, the edge rotation can spin to more than 20 km s<SUP>−1</SUP> in co-current direction. On the other hand, the core plasma rotation can be slowed down or be accelerated with the rotating RMP. When the rotating RMP frequency is higher than mode frequency, the plasma rotation can be accelerated to the rotating RMP frequency. The plasma confinement is improved with high frequency rotating RMP. The plasma rotation is decelerated to the rotating RMP frequency when the rotating RMP frequency is lower than the mode frequency. The plasma confinement also degrades with low frequency rotating RMP.</P>
Intrinsic rotation reversal, non-local transport, and turbulence transition in KSTAR L-mode plasmas
Shi, Y.J.,Kwon, J.M.,Diamond, P.H.,Ko, W.H.,Choi, M.J.,Ko, S.H.,Hahn, S.H.,Na, D.H.,Leem, J.E.,Lee, J.A.,Yang, S.M.,Lee, K.D.,Joung, M.,Jeong, J.H.,Yoo, J.W.,Lee, W.C.,Lee, J.H.,Bae, Y.S.,Lee, S.G.,Yo International Atomic Energy Agency 2017 Nuclear fusion Vol.57 No.6
<P>Experiments of electron cyclotron resonance heating (ECH) power scan in KSTAR tokamak clearly demonstrate that both the cutoff density for non-local heat transport (NLT) and the threshold density for intrinsic rotation reversal can be determined by the collisionality. We demonstrate that NLT can be affected by ECH, and the intrinsic rotation direction follows the changes of NLT. The cutoff density of NLT and threshold density for rotation reversal can be significantly increased by ECH. The poloidal flow of turbulence in core plasma is in the electron and the ion diamagnetic direction in ECH plasmas and high density OH plasma, respectively. The auto-power spectra of density fluctuation are almost the same in the outer region for both ECH and OH plasmas. On the other hand, the divergence in density fluctuation spectra at high frequency range between OH and ECH plasma is clearly observed in core region. The features of linear confinement and saturated confinement also appeared in ECH plasma, which is similar to the linear ohmic confinement (LOC) mode and saturate ohmic confinement (SOC) mode. All these observations in macroscopic parameters and micro fluctuations suggest a possible link between the macro phenomena and the structural changes in turbulence mode.</P>
Shi, X.,Wang, J.,Liu, J.,Huang, S.,Wu, X.,Chen, C.,Lu, J.,Su, Y.,Zheng, Y.,Kim, W.Y.,He, G. Elsevier Science 2014 Organic electronics Vol.15 No.4
We have successfully applied finite-difference time-domain (FDTD) method in top-emitting organic light-emitting diodes (TOLEDs) for structure optimization, demonstrating good agreement with experimental data. A mixed host with both hole transport and electron transport materials is employed for the green phosphorescent emitter to avoid charge accumulation and broaden the recombination zone. The resulting TOLEDs exhibit ultra-high efficiencies, low current efficiency roll-off, and a highly saturated color, as well as hardly detectable spectrum shift with viewing angles. In particular, a current efficiency of 127.0cd/A at a luminance of 1000cd/m<SUP>2</SUP> is obtained, and maintains to 116.3cd/A at 10,000cd/m<SUP>2</SUP>.
Vibration reduction for interaction response of a maglev vehicle running on guideway girders
Y.J. Wang,J.D. Yau,J. Shi,S. Urushadze 국제구조공학회 2020 Structural Engineering and Mechanics, An Int'l Jou Vol.76 No.2
As a vehicle moves on multiple equal-span beams at constant speed, the running vehicle would be subjected to repetitive excitations from the beam vibrations under it. Once the exciting frequency caused by the vibrating beams coincides with any of the vehicle’s frequencies, resonance would take place on the vehicle. A similar resonance phenomenon occurs on a beam subject to sequential moving loads with identical axle-intervals. To reduce both resonant phenomena of a vehicle moving on guideway girders, this study proposed an additional feedback controller based the condensed virtual dynamic absorber (C-VDA) scheme. This condensation scheme has the following advantages: (1) the feedback tuning gains required to adapt the control currents or voltages are directly obtained from the tuning forces of the VDA; (2) the condensed VDA scheme does not need additional DoFs of the absorber to control the vibration of the maglev-vehicle/guideway system. By decomposing the maglev vehicle-guideway coupling system into two sub-systems (the moving vehicle and the supporting girders), an incremental-iterative procedure associated with the Newmark method is presented to solve the two sets of sub-system equations. From the present studies, the proposed C-VDA scheme is a feasible approach to suppress the interaction response for a maglev vehicle in resonance moving on a series of guideway girders.
EXPERIMENTAL STUDY OF EGR COOLER REGENERATION AIDED BY OXYGEN-FED NTP AND AIR-FED NTP
Y. X. SHI,Y. ZHENG,Y. X. CAI,W. J. LI,H. XU 한국자동차공학회 2016 International journal of automotive technology Vol.17 No.3
Based on non-thermal plasma (NTP) technology fed by oxygen and air as the gas source respectively, the experimental system of exhaust gas recirculation (EGR) cooler regeneration was built to do a study at different regeneration temperatures. By measuring the concentration of main active substance and COx in regeneration process, the influence of temperature on regeneration aided by oxygen-fed NTP and air-fed NTP was investigated. The experimental results indicate that EGR cooler can be regenerated both by air-fed NTP and oxygen-fed NTP at a wide temperature range of 18 oC ~ 300 oC. By comparison of the regeneration with oxygen-fed NTP and air-fed NTP, it can be easily known that the regeneration effect is most remarkable at 150 oC with oxygen-fed NTP and at 120 oC with air-fed NTP. In addition, when the temperature is below 150 oC especially at 120 oC, the regeneration efficiency of air-fed NTP is lower than oxygen-fed NTP, nevertheless, when the temperature is above 150 oC, air-fed NTP has a superiority in regeneration and the higher the temperature is, the more obvious the superiority will be.