Evaluation of modified cationic starch for impeding polymer channeling and in-depth profile control after polymer flooding

Ru Qiao,Weiqun Zhu 한국공업화학회 2010 Journal of Industrial and Engineering Chemistry Vol.16 No.2

Premature polymer production in large quantities from flooding reservoirs is a serious problem commonly existing in some large oilfields in China. This is owing to polymer channeling through high permeability zones or pore passage. This paper presents a novel modified cationic starch, which can react with partially hydrolyzed polyacrylamide (HPAM) remaining in reservoir formation to form gels in-situ. The obtained gels can reduce polymer channeling and make successive injected water into mid-low permeability zones that achieve the purpose of deep profile control. The rheological property and the ge strength are examined. The singular sand-pack core-flood test results provide experimental evidence that the formed gel system is more effective in plugging high permeability pore passages. Moreover, the parallel core-flood test was conducted to simulate the process of in-depth profile modification in a heterogeneous formation. It has been found that this gel system can significantly enhance oil recovery and effectively reduce water-cut.

Lab simulation of profile modification and enhanced oil recovery with a quaternary ammonium cationic polymer

Ru Qiao,Rui Zhang,Weiqun Zhu,Peijun Gong 한국공업화학회 2012 Journal of Industrial and Engineering Chemistry Vol.18 No.1

Long-term water flooding in oilfield exploitation generally results in a marked increase of interlayer and/or inner-layer heterogeneity of oil reservoirs and premature polymer production in large quantities from flooding reservoirs. This paper presents a novel quaternary ammonium cationic polymer (NCP), which was prepared by using maize starch and (2,3-epoxypropyl)trimethylammonium chloride as raw materials. The effect of NCP on water plugging and profile modificaton after polymer HPAM (partially hydrolyzed polyacrylamide) flooding was evaluated by laboratory simulation tests of enhanced oil recovery. The experimental results indicate that crosslinking gel system formed after HPAM-NCP alternate injection could effectively seal off the high permeability zone to force the successive liquid to flow to mid-low permeability zones and get profile control in depth. In addition, the contact angle measurements reveal that the adsorption of NCP on the montmorillonite changed its surface wettability and enhanced its hydrophilicity, which promoted enhance oil recovery significantly.

Application of a novel cationic starch in enhanced oil recovery and its adsorption properties

Ru Qiao,Weiqun Zhu,Jianong Fu,Lanlan Zhu,Shiyou Hao 한국화학공학회 2013 Korean Journal of Chemical Engineering Vol.30 No.1

We report a preparation of water-soluble cationic starch and its application as an oil-displacing agent in chemical enhanced oil recovery. The singular sand-pack core-flood tests provide experimental evidence that the injection of the modified starch after the conventional water flooding can significantly enhance oil recovery and effectively reduce water-cut. To discuss the proposed oil-displacement mechanism of this cationic starch solution, its static and dynamic adsorption properties were also presented in this paper.

Morphological Transformation of Co(OH)₂ Microspheres from Solid to Flowerlike Hollow Core–Shell Structures

Qiao, Ru,Zhang, Xiao Li,Qiu, Ri,Kim, Ju Chang,Kang, Young Soo WILEY-VCH Verlag 2009 Chemistry Vol.15 No.8

<P>Co(OH)<SUB>2</SUB> that blooms: Flowerlike hollow spherical architectures of cobalt hydroxide obtained through a facile solvothermal process are reported for the first time (see picture). Their growth process involves aggregation of cobalt hydroxide nanoparticles into solid spheres and a hollowing effect through subsequent dissolution-diffusion-redeposition of the smaller crystallites under the surface layer. <img src='wiley_img/09476539-2009-15-8-CHEM200800803-content.gif' alt='wiley_img/09476539-2009-15-8-CHEM200800803-content'> </P><P>We report, for the first time, a detailed investigation into the formation of highly uniform, 3D, flowerlike, hollow, spherical architectures of cobalt hydroxide through a facile solvothermal process. Various controlling parameters were examined, such as water content in starting materials, reaction time, cobalt(II) precursor concentration, and reaction temperature. On the basis of the experimental results, the formation mechanism of these flowerlike cobalt hydroxide hollow spheres involves aggregation of cobalt hydroxide building clusters into solid spheres and hollowing effect through subsequent dissolution, diffusion, and re-deposition of the smaller crystallites under the surface layer driven by an Ostwald ripening process. Metallic cobalt hollow spheres have also been obtained by thermal decomposition of cobalt hydroxide flowers in a mixed gas of Ar+4 % H<SUB>2</SUB> at 400 °C. The morphology and composition of the products were characterized by X-ray diffraction, field-emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, and (high resolution) transmission electron microscopy.</P> <B>Graphic Abstract</B> <P>Co(OH)<SUB>2</SUB> that blooms: Flowerlike hollow spherical architectures of cobalt hydroxide obtained through a facile solvothermal process are reported for the first time (see picture). Their growth process involves aggregation of cobalt hydroxide nanoparticles into solid spheres and a hollowing effect through subsequent dissolution-diffusion-redeposition of the smaller crystallites under the surface layer. <img src='wiley_img/09476539-2009-15-8-CHEM200800803-content.gif' alt='wiley_img/09476539-2009-15-8-CHEM200800803-content'> </P>

Nested Case-control Study of Occupational Radiation Exposure and Breast and Esophagus Cancer Risk among Medical Diagnostic X Ray Workers in Jiangsu of China

Wang, Fu-Ru,Fang, Qiao-Qiao,Tang, Wei-Ming,Xu, Xiao-San,Mahapatra, Tanmay,Mahapatra, Sanchita,Liu, Yu-Fei,Yu, Ning-Le,Sun, Quan-Fu Asian Pacific Journal of Cancer Prevention 2015 Asian Pacific journal of cancer prevention Vol.16 No.11

Medical diagnostic X-ray workers are one occupational group that expose to the long-term low-dose external radiation over their working lifetime, and they may under risk of different cancers. This study aims to determine the relationship between the occupational X-ray radiation exposure and cancer risk among these workers in Jiangsu, China. We conducted Nested case-control study to investigate the occupational X-ray radiation exposure and cancer risk. Data were collected through self-administered questionnaire, which includes but not limits to demographic data, personal behaviors and family history of cancer. Retrospective dose reconstruction was conducted to estimate the cumulative doses of the x-ray workers. Inferential statistics, t-test and 2 tests were used to compare the differences between each group. We used the logistic regression model to calculate the odds ratio (OR) and 95% confidence interval (CI) of cancer by adjusting the age, gender. All 34 breast cancer cases and 45 esophageal cancer cases that detected in a cohort conducted among health workers between 1950~2011 were included in this presented study, and 158 cancer-free controls were selected by frequency-matched (1:2). Our study found that the occupational radiation exposure was associated with a significantly increased cancer risk compared with the control, especially in breast cancer and esophageal cancer (adjusted OR=2.90, 95% CI: 1.19-7.04 for breast cancer; OR=4.19, 95% CI: 1.87-9.38 for esophageal cancer, and OR=3.43, 95% CI: 1.92-6.12 for total cancer, respectively). The occupational X-ray radiation exposure was associated with increasing cancer risk, which indicates that proper intervention and prevention strategies may be needed in order to bring down the occupational cancer risk.

Effects of moderate pressure on premeability and viability of Saccharomyces cerevisiae cells

Shi-Ru Jia,Na-Chen,Yu-Jie Dai,Chang-Sheng Qiao,Jian-Dong Cui,Bo-Ning Liu 한국화학공학회 2009 Korean Journal of Chemical Engineering Vol.26 No.3

With CO2 and N2 as the pressure media, the effects of the moderate pressure (0.1-1.0MPa) and the holding time on the conductivities of the cell suspension of Saccharomyces cerevisiae CICC1447 and Saccharomyces cerevisiae CICC1339, as well as the absorbances of the supernatant (after centrifuged) at 280 nm (A280) and 260 nm (A260) were determined. The membrane permeability of Saccharomyces cerevisiae CICC1447 increased significantly and the cell leakage was aggravated with the pressure increase. For Saccharomyces cerevisiae CICC1339, the conductivity of the cell suspension, A280 and A260 of the supernatant fluctuated with the pressure increase; as a whole, they increased with pressure. Different from high pressure, a moderate pressure not only remarkably improved the permeability of the yeast cell membrane, but also kept yeast cell viability; moreover, the integrity of the yeast cell membrane could be maintained.

Mutations in AP22.65 Accelerate Flowering in Arabidopsis thaliana

Ji Hong Xing,Feng Ru Wang,Jiao Jia,Jing Zhang,Li Li,Zhan Chen,Qiao Yun Weng,Ping Yang,Ye Zhang,Bin Zhao,He Long Si,Jin Gao Dong,Jian Min Han 한국식물학회 2013 Journal of Plant Biology Vol.56 No.1

Identification of the gene(s) responsible for floweringtime in Arabidopsis has significant implications. We used theT-DNA insertion library of Arabidopsis thaliana to screen anearly-flowering mutant that exhibits accelerated floweringunder short-day conditions. AP22.65, a novel flowering-timegene in that species, was isolated and identified via genomewalkingand bioinformatics analysis. The flowering time ofAP22.65-complementing plants was similar to that of theCol-0 wild type (WT). Conversely, its overexpression delayedflowering. Consistent with this phenotype, expression ofAP22.65 was decreased in the ap22.65-1 mutant, recoveredin AP22.65-complementing plants, and increased in AP22.65-overexpressing plants. Compared with the WT, expressionlevels of critical genes in different flowering pathways, i.e.,SPY, FLC, GI, CO, FT, and LFY, were down-regulated inloss-of-function mutants. Expression of AP22.65 was distributedin flowers, siliques, rosette leaves, and whole seedlings. Therefore, this gene may be a negative regulator of Arabidopsisflowering.

Cultivation of Nostoc flagelliforme on Solid Medium

( Jian Yu Su ),( Shi Ru Jia ),( Chang Sheng Qiao ),( Jung Gyu Kim ),( Wan Hae Hong ),( Ki An Cho ),( Du Bok Choi ) 한국환경생물학회 2005 환경생물 : 환경생물학회지 Vol.23 No.2

N/A In order to construct an artificial cultivation of Nostoc flagelliforme on solid medium, we attempted to assess the viability of approaches, which utilized either BG -11 agar or sand medium using both sterile and non-sterile algal segments. In the trial in which the BG-11 agar medium was inoculated with the non-sterile algal segments, the algae exhibited the rapid growth in the initial 4 days of cultivation. However, after 4 days of cultivation, the growth rate of the algae slowed, and the algal growth was completely stopped by 7 days of cultivation. When the BG-11 medium was inoculated with the sterile algal segments, the algae exhibited the rapid growth for a longer period of 8 days, reaching a length of 24.9 mm. The growth rate during this period was measured to be 24.5%. After the 8 days of cultivation, the algal growth rate began to slow and had almost stopped by the 13 days of cultivation. On the other hand, when the sterile algal segments were inoculated onto a sand plate, the algal segments decomposed, reaching total decomposition after 11 days of cultivation. By way of contrast, the desiccation treatment samples continued to grow for 14 days of cultivation. After 14 days of cultivation, the algae achieved a length of 26.1 mm, with a growth rate of 30.6%. Our results indicate that periodic desiccation may constitute an effective strategy for the prevention of algal decomposition.

Investigation of Co nanoparticle assemblies induced by magnetic field

Yan Li,Xiao Li Zhang,Ri Qiu,Ru Qiao,강영수 한국공업화학회 2008 Journal of Industrial and Engineering Chemistry Vol.14 No.1

Cobalt nanoparticles were synthesized by using cobalt (II) acetate as precursor in an organic solution. Under the inuence of a 0.05 T magneticeld, in a colloidal solution, the cobalt nanoparticles covered with surfactants were assembled into highly constrained linear chains along thedirection of the magnetic eld. After removal of the eld the chains become oppy and then aggregate into pearl necklaces coiled structuresupon gentle agitation. The differences of the magnetic properties between the magnetic eld induced and random cobalt nanoparticles can becharacterized by superconducting quantum interference devise (SQUID).# 2007 The Korean Society of Industrial and Engineering Chemistry. Published by Elsevier B.V. All rights reserved.

Advances in the Early Detection of Lung Cancer using Analysis of Volatile Organic Compounds: From Imaging to Sensors

Li, Wang,Liu, Hong-Ying,Jia, Zi-Ru,Qiao, Pan-Pan,Pi, Xi-Tian,Chen, Jun,Deng, Lin-Hong Asian Pacific Journal of Cancer Prevention 2014 Asian Pacific journal of cancer prevention Vol.15 No.11

According to the World Health Organization (WHO), 1.37 million people died of lung cancer all around the world in 2008, occupying the first place in all cancer-related deaths. However, this number might be decreased if patients were detected earlier and treated appropriately. Unfortunately, traditional imaging techniques are not sufficiently satisfactory for early detection of lung cancer because of limitations. As one alternative, breath volatile organic compounds (VOCs) may reflect the biochemical status of the body and provide clues to some diseases including lung cancer at early stage. Early detection of lung cancer based on breath analysis is becoming more and more valued because it is non-invasive, sensitive, inexpensive and simple. In this review article, we analyze the limitations of traditional imaging techniques in the early detection of lung cancer, illustrate possible mechanisms of the production of VOCs in cancerous cells, present evidence that supports the detection of such disease using breath analysis, and summarize the advances in the study of E-noses based on gas sensitive sensors. In conclusion, the analysis of breath VOCs is a better choice for the early detection of lung cancer compared to imaging techniques. We recommend a more comprehensive technique that integrates the analysis of VOCs and non-VOCs in breath. In addition, VOCs in urine may also be a trend in research on the early detection of lung cancer.