국가 대표급과 제주도 고교 대표급 수영선수들의 그랩 스타트의 운동학적 분석

김철원,김승곤,오만원,임상용,김성찬,이창준,남사웅,이세형,류재청,신석종,김세민 濟州大學敎 體育科學硏究所 1998 체육과학연구 Vol.4 No.-

The purpose of the study was to undertaken to analysis the Grab starting technique between national representive team(3) and Cheju's representive team(3) with 3D cinematography. The conclusions obtained were as follows: Cheju's showed more elapsed time than national representive team on starting block. and more vertical than horizontal direction of COG position, more concentrated vertical velocity & acceleration than forward direction. Therefore It is necessory for cheju's to train balanced trust force in horizontal and vertical direction in grab starting technique.

이중컨버터방식 직류전원공급장치의 순환전류제어에 의한 입력 역율개선

이규종,이기홍,성세진 忠南大學校 産業技術硏究所 1989 산업기술연구논문집 Vol.4 No.2

이중컨버터방식의 직류전원공급장치는 4상한 운전이 필요한 직류모터, 직류쵸파, PWM인버터등의 대용량 전력변환장치의 직류전원으로 주로 사용된다. 그러나 순환전류를 제어하는 이중컨터방식의 직류전원공급장치에서는 위상제어와 P와 N 두 컨버터 사이에 흐르는 순환전류에 의하여 교류입력측에 무효전력을 발생시키는 단점이 있다. 최근 이중컨버터방식의 순환전류제어에 관한 논문이 몇편 발표된 일이 있다. 본 논문에서는 이 순환전류제어방식을 이용하여 교류입력측 역율을 1로 보상할 수 있는 방안을 제시하였으며 이방안의 가능성을 컴퓨터 시뮤레이션과 실험을 통하여 확인하다.

不良 갯수의 分布에 대한 檢査過誤의 영향

李鍾盛,安世熙 강원대학교 산업기술연구소 1984 産業技術硏究 Vol.4 No.-

This paper presents a proof that b(r;n, ppd) is the appropriate distribution of the number of observed defects When inspector errors are present. And the effect of inspector errors on the probability of type 1 and type 2 errors is discussed.

신경독성 물질에 폭로되지 않은 건강한 남자의 신경행동학적 검사 수행능력

이세훈,김형아,이원철,장성실,이경재,박정일,정치경 大韓産業醫學會 1995 대한직업환경의학회지 Vol.7 No.1

Five items among neurobehavioral core test battery of World Health Organization, including Santa Ana dexterity, pursuit aiming, digit symbol, simple reaction time, and Benton visual retention, were administered to the workers occupationally non-exposed to neurotoxic agents by operational guide for the WHO neurobehavioral core test battery. Subjects were volunteers from the industrial workers(117) and clerks(40). Detailed occupational history such as exposed agents including noise or vibration, educational level, residence, smoking and drinking habit were recorded. Most of the neurobehavioral tests were correlated with age and educational level. Smoking was correlated with pursuit aiming and digit symbol. Vibration affected pursuit aiming. Job type(industrial workers vs. clerks) and noise exposure did not affected among tested items. Multiple regression analysis was done for establishing predict equation to estimate normal ranges of the tests for male workers. Age was shown to be main independent variable affected for all tests except wrong dot of pursuit aiming. Educational level was also shown to affected most of the tests except Santa ana dexterity and wrong dot of pursuit aiming. Alcohol consumption affected Santa Ana dexterity, non-preferred hand, and smoking affected only wrong dot of pursuit aiming after multiple regression analysis.

산업보건관리자를 위한 소음성 난청 예방지침서의 개발

이원철,유경혜,장성실,이세훈,구정완,김현욱,노영만,이경재,김형아 가톨릭 대학 산업의학 쎈타 산업의학연구소 1996 韓國의 産業醫學 Vol.35 No.1

Occupational hearing loss became the leading occupational disease by constioution 56% of all work-related diseases in Korea. However, the prevalance rates showed wide variations among the specific medical examination providers and were very low(0.8-1.4%) compared with those 8.4% in Japan. The sources of these variations was regarded in the preview study as 1) Employee audometric estings were primarily conducted by nurses and nurse-aids who had no formal training for audiometry; 2) althought audiometric testing equipment used by the spedific medical examination providers, it should be periodically calibrated, a significant number of them were not properly calibrated : 3) Initial audiometric testings were conducted at any available spaces in workplace or at the testing room without considering bachground noise level. One of solutions that can be done for sloving surrent noise related problems is to provide a noise related manual for the occupational health managers including doctors, nurses and hyginests. This study was done to provide such a manual. The main core of the manual was hearing conservation program. And the contents of the manual was the same as the main frame of hearing conservation program such as noise survey, provided of the diagram showing the core contents of each factor of the hearing conservation program. Hopefully, this manual will be the references of the standardized performances of the specific medical examination providers.

관상동맥 시술 도중 발생한 좌주간부 관상동맥 박리에 대한 스텐트 삽입 치료의 단장기 임상 결과 : acute and long-term results

이세환,이승환,홍명기,김영학,이철환,한기훈,송종민,강덕현,송재관,김재중,박성욱,박승정 대한내과학회 2004 대한내과학회지 Vol.66 No.6

목적 : 심도자 사용 시술과 관련된 좌주간부 관상동맥박리에 대한 적절한 치료는 아직 확실히 정립되지 않은 상태이다. 이에 본 연구는 좌주간부 관상동맥 박리에 대한 스텐트 삽입술의 단장기 임상결과를 후향적으로 분석하였다. 방법 : 좌주간부 관상동맥 박리에 대한 치료로 즉각적인 스텐트 삽입술을 시행하는 것이 안전하고 효과적인 방법임을 가설하였고, 이러한 즉각적인 스텐트 삽입을 시행한 10명의 환자를 대상으로 단장기적 임상경과를 의무기록 고찰과 전화 면담을 통해서 평가하였다. 결과 : 전체 환자 모두 처음부터 좌주간부 관상동맥에 유의한 협착을 가진 환자는 없었으며, 8명의 환자는 심도자의 조작으로 인한 박리가 발생한 경우였고(진단적 혈관 조영술 중에 3명, 유도 도자 조작 중에 5명), 나머지 2명은 다른 병변에 스텐트 삽입시술을 하는 중에 박리가 발생하였다. 이 10명의 환자에서 모두 즉각적인 스텐트 삽입술이 시행되었고, 4명의 환자에서 시술 도중 혈압 저하로 Intra-aortic Ballon Pump (IABP)를 장착하였다. 모든 환자에서 성공적으로 스텐트가 삽입되었고, 병원내 사망은 1명도 없었다. 6개월 추적 관상동맥 조영술은 8명의 환자에서 시행되었다. 혈관 조영상의 재협착(직경 협착 50% 이상)은 8명 모두에게서 관찰되지 않았으며, 퇴원 후 평균 31±25개월의 추적관찰 결과 주요 심장사건은 1건도 발생하지 않았다. 결론 : 비록 대상 환자가 적은 연구였지만 좌주간부 관상동맥 박리에 대한 스텐트 삽입술은 기술적으로 안전하고 빠르게 시행 할 수 있으며, 훌륭한 단장기적인 치료 효과를 보여준다. Background : The optimal treatment of patients with left main coronary artery (LMCA) dissection during catheter-based procedure remains uncertain. We retrospectively analyzed the acute and long-term results of bail-out stenting for LMCA dissection. Methods : In cases with significant LMCA dissection occurring during catheter-based procedure, prompt stent implantation may be safe and associated with favorable clinical outcome. We evaluated the acute and long-term results of bail-out stenting for LMCA dissection occurring during catheter-bases procedure in 1- patients. Results : Initially, there was significant stenosis of LMCA segment in these patients. Catheter-induced dissection occurred in 8 patients (during diagnostic angiography in 3 patients and guiding catheter manipulation in 5 patients). Two patients suffered dissection in the setting of stent deployment in other vessels. Therefore, bail-out stenting LMCA dissection was performed in a total of 10 patients. In 4 patients, hypotension developed and intra-aortic balloon pump was placed during procedure. Stents were successfully deployed in all patients. There was no in-hospital mortality. Six-month angiographic follow-up was performed in 8 patients. Angiographic restenosis(diameter stenosis 50%) was not observed in all patients at follow-up study. During a mean follow-up of 31±25 months after hospital discharge, there was no major adverse cardiac event (death, myocardial infarction, and target lesion revascularization). Conclusion : Bail-out LMCA stenting is technically feasible, and showed good acute and long-term results in a small series of patients.

초임계 이산화탄소를 이용하는 친환경 공정에 의한 다공성 고분자의 제조

강세란,홍성수,이민규,이석희,천재기,주창식 한국환경과학회 2004 한국환경과학회지 Vol.13 No.3

An experimental study on the preparation of monolithic porous polymers by environmentally friend process in supercritical carbon dioxide has been carried out. Polymerization mixture composed of a cross-linking monomer, initiator and functional co-polymer was charged in the reactor with sapphire window. After the system was purged with a flow of CO₂ for 15 min, the reactor was pressurized with liquid CO₂ up to 100 bars. The reactor was isolated from and placed back to the system via quick connector for shaking until the mixture had become fully homogeneous. The reactor was then heated and pressurized to the required reaction conditions and left overnight. After cooling and CO₂ evacuation, the polymer was removed from the reactor as dry, white, continuous monoliths. The effect of experimental conditions on the physical properties of porous polymer was systematically examined, and it was found that monomer content had a major effect on the physical properties of the polymers.

삼각측량 시스템을 이용한 3-D 형상 복원

홍성표,김국세,한승조,김길준,김충원,이준 조선대학교 전자정보통신연구소 2001 電子情報通信硏究所論文誌 Vol.4 No.2

The 3-D shape use to effect of movie, animation, industrial design, medical treatment service, education, engineering etc... But it is not easy to make 3-D shape from the information of 2-D image. There are two methods in restoring 3-D video image through 2-D image; First the method of using a laser; Second, the method of acquiring 3-D image through stereo vision. Instead of doing two methods with many difficulties, I study the method of simple 3-D image in this research paper. We present here a simple and efficient method, called direct calibration, which does not require any equations at all. The direct calibration procedure builds a lookup table(LUT) image and 3-D coordinates by a real 3-D triangulation system. The LUT is built by measuring the image coordinates of a grid of known 3-D points, and recording both image and world coordinates for each point; the depth values of all other visible points are obtained by interpolation.

Prazosin의 항고혈압 효과에 대한 임상적 관찰

서세웅,이균태,김연호,조성락,신영우,신영기 최신의학사 1984 最新醫學 Vol.27 No.8

高張力鋼熱影響部 微視組織의 類別

鄭世喜,金台永,李聖哲 全北大學校 1979 論文集 Vol.21 No.-

The assessment of the toe HAZ fracture toughness is one of the most troublesome problems to resolve because the fracture toughness depends to a large extent upon microstructural gradients such as variations of the microstructure and the grain size in the HAZ and because such microstructural characteristics are directly influenced by the thermal cycle during welding. The aim of the present study is to classify metallurgically the distribution of the constituents of microstructure in the HAZ by measuring Vickers microhardness. The metallurgical observation and microhardness measurement for the toe HAZ of 60㎏/㎟ low alloy steel, which was submerged are welded as bead-on-plate, were carried out. The experimental results were summarized as follows; There is a linear relationship between the ratio of hardness Hv/(Hv)_M (Hv:Vickers hardness, (Hv)_M : Vickers hardness of 100% martensite) and the area percentage of their structural constituents, and it is independent on chemical composition of materials. It was concluded, consequently, that the transformation behavior for the structure of other 60㎏/㎟ low alloy steel in the HAZ and the ratio of mixture of structural constituents in its every position can be quantitatively classified by the ratio of microhardness Hv/(Hv)_M.