Carbon dynamics in agricultural greenhouse gas emissions and removals: a comprehensive review

Kamyab Hesam,SaberiKamarposhti Morteza,Hashim Haslenda,Yusuf Mohammad 한국탄소학회 2024 Carbon Letters Vol.34 No.1

Agriculture is a pivotal player in the climate change narrative, contributing to greenhouse gas (GHG) emissions while offering potential mitigation solutions. This study delved into agriculture’s climate impact. It comprehensively analysed emissions from diverse agricultural sources, carbon sequestration possibilities, and the repercussions of agricultural emissions on climate and ecosystems. The study began by contextualising the historical and societal importance of agricultural GHG emissions within the broader climate change discourse. It then discussed into GHG emitted from agricultural activities, examining carbon dioxide, methane, and nitrous oxide emissions individually, including their sources and mitigation strategies. This research extended beyond emissions, scrutinising their effects on climate change and potential feedback loops in agricultural systems. It underscored the importance of considering both the positive and negative implications of emissions reduction policies in agriculture. In addition, the review explored various avenues for mitigating agricultural emissions and categorised them as sustainable agricultural practices, improved livestock management, and precision agriculture. Within each category, different subsections explain innovative methods and technologies that promise emissions reduction while enhancing agricultural sustainability. Furthermore, the study addressed carbon sequestration and removal in agriculture, focussing on soil carbon sequestration, afforestation, and reforestation. It highlighted agriculture’s potential not only to reduce emissions, but also to serve as a carbon reservoir, lowering overall GHG impact. The research also scrutinised the multifaceted nature of agriculture, examining the obstacles hindering mitigation strategies, including socioeconomic constraints and regulatory hurdles. This study emphasises the need for equitable and accessible solutions, especially for smallholder farmers. It envisioned the future of agricultural emissions reduction, emphasising the advancements in measurement, climate-smart agricultural technologies, and cross-sectoral collaboration. It highlighted agriculture’s role in achieving sustainability and resilience amid a warming world, advocating collective efforts and innovative approaches. In summary, this comprehensive analysis recognised agriculture’s capacity to mitigate emissions while safeguarding food security, biodiversity, and sustainable development. It presents a compelling vision of agriculture as a driver of a sustainable and resilient future.

SENSITIVITY ANALYSES OF THE USE OF DIFFERENT NEUTRON ABSORBERS ON THE MAIN SAFETY CORE PARAMETERS IN MTR TYPE RESEARCH REACTOR

Kamyab, Raheleh Korean Nuclear Society 2014 Nuclear Engineering and Technology Vol.46 No.4

In this paper, three types of operational and industrial absorbers used at research reactors, including Ag-In-Cd alloy, $B_4C$, and Hf are selected for sensitivity analyses. Their integral effects on the main neutronic core parameters important to safety issues are investigated. These parameters are core excess reactivity, shutdown margin, total reactivity worth of control rods, thermal neutron flux, power density distribution, and Power Peaking Factor (PPF). The IAEA 10 MW benchmark core is selected as the case study to verify calculations. A two-dimensional, three-group diffusion model is selected for core calculations. The well-known WIMS-D4 and CITATION reactor codes are used to carry out these calculations. It is found that the largest shutdown margin is gained using the $B_4C$; also the lowest PPF is gained using the Ag-In-Cd alloy. The maximum point power densities belong to the inside fuel regions surrounding the central flux trap (irradiation position), surrounded by control fuel elements, and the peripheral fuel elements beside the graphite reflectors. The greatest and least fluctuation of the point power densities are gained by using $B_4C$ and Ag-In-Cd alloy, respectively.

Market-Based Transmission Expansion Planning Under Uncertainty in Bids by Fuzzy Assessment

Kamyab, Gholam-Reza,Fotuhi-Firuzabad, Mahmood,Rashidinejad, Masoud The Korean Institute of Electrical Engineers 2012 Journal of Electrical Engineering & Technology Vol.7 No.4

In this paper, by a simple example it is shown that existing market-based criteria alone cannot completely and correctly evaluate the transmission network expansion from market view. However criteria congestion cost (CC) and social welfare (SW) together are able to correctly evaluate transmission network from market view and so they are adopted for the market-based transmission expansion planning. To simply indicate the limits of CC and SW social welfare percentage (SWP) and congestion cost percentage (CCP) are defined. To consider uncertainty in bids of market producers and consumers, and also indeterminacy in the acceptable boundaries of the SWP and CCP and their priorities, fuzzy assessment approach is used. In this approach, appropriate fuzzy sets and a fuzzy rule base are provided to evaluate the acceptability of an expansion plan. Then, the least-investment cost plan, which is acceptable in all probable scenarios, is searched. The proposed method is applied to an 8-bus system.

Sensitivity Analyses of the use of Different Neutron Absorbers on the Main Safety Core Parameters in MTR Type Research Reactor

RAHELEH KAMYAB 한국원자력학회 2014 Nuclear Engineering and Technology Vol.46 No.4

In this paper, three types of operational and industrial absorbers used at research reactors, including Ag-In-Cd alloy, B4C,and Hf are selected for sensitivity analyses. Their integral effects on the main neutronic core parameters important to safetyissues are investigated. These parameters are core excess reactivity, shutdown margin, total reactivity worth of control rods,thermal neutron flux, power density distribution, and Power Peaking Factor (PPF). The IAEA 10 MW benchmark core isselected as the case study to verify calculations. A two-dimensional, three-group diffusion model is selected for core calculations. The well-known WIMS-D4 and CITATION reactor codes are used to carry out these calculations. It is found that thelargest shutdown margin is gained using the B4C; also the lowest PPF is gained using the Ag-In-Cd alloy. The maximumpoint power densities belong to the inside fuel regions surrounding the central flux trap (irradiation position), surrounded bycontrol fuel elements, and the peripheral fuel elements beside the graphite reflectors. The greatest and least fluctuation of thepoint power densities are gained by using B4C and Ag-In-Cd alloy, respectively.

Market-Based Transmission Expansion Planning Under Uncertainty in Bids by Fuzzy Assessment

Gholam-Reza Kamyab,Mahmood Fotuhi-Firuzabad,Masoud Rashidinejad 대한전기학회 2012 Journal of Electrical Engineering & Technology Vol.7 No.4

In this paper, by a simple example it is shown that existing market-based criteria alone cannot completely and correctly evaluate the transmission network expansion from market view. However criteria congestion cost (CC) and social welfare (SW) together are able to correctly evaluate transmission network from market view and so they are adopted for the market-based transmission expansion planning. To simply indicate the limits of CC and SW social welfare percentage (SWP) and congestion cost percentage (CCP) are defined. To consider uncertainty in bids of market producers and consumers, and also indeterminacy in the acceptable boundaries of the SWP and CCP and their priorities, fuzzy assessment approach is used. In this approach, appropriate fuzzy sets and a fuzzy rule base are provided to evaluate the acceptability of an expansion plan. Then, the least-investment cost plan, which is acceptable in all probable scenarios, is searched. The proposed method is applied to an 8-bus system.

Efficacy of Computer-Aided Design and Manufacturing Versus Computer-Aided Design and Finite Element Modeling Technologies in Brace Management of Idiopathic Scoliosis: A Narrative Review

Bidari Shahrbanoo,Kamyab Mojtaba,Ghandhari Hassan,Komeili Amin 대한척추외과학회 2021 Asian Spine Journal Vol.15 No.2

The efficiency and design quality of scoliosis braces produced by the conventional casting method depends highly on the orthotist’s experience. Recently, advanced engineering techniques have been used with the aim of improving the quality of brace design and associated clinical outcomes. Numerically controlled machine tools have provided enormous opportunities for reducing the manufacturing time and saving material. However, the effectiveness of computer-aided brace manufacturing for scoliosis curve improvement is controversial. This narrative review is aimed at comparing the efficacy of braces made by the conventional method with those made by two computer-aided methods: computer-aided design and manufacturing (CAD-CAM), and computer-aided design and finite element modeling (CAD-FEM). The comparison was performed on scoliosis parameters in coronal, sagittal, and transverse planes. Scientific databases were searched, and 11 studies were selected for this review. Because of the diversity of study designs, it was not possible to decisively conclude which brace-manufacturing method is most effective. Similar effectiveness in curve correction was found in the coronal plane for braces made by using advanced manufacturing and conventional methods. In the sagittal plane, modern braces seem to be more effective than traditional braces, but there is an ongoing debate among clinicians, about which CAD-CAM and CAD-FEM brace provides a better treatment outcome. The relative effectiveness of modern and conventional methods in correcting deformities in the transverse plane is also a controversial subject. Overall, advanced engineering design and production methods can be proposed as time- and cost-efficient approaches for scoliosis management. However, there is insufficient evidence yet to conclude that CAD-CAM, and CAD-FEM methods provide significantly better clinical outcomes than those of conventional methods in the treatment of scoliosis curve. Moreover, for some factors, such as molding and the patient’s posture during the data acquisition, in brace curve-correction plan, the orthotist’s experience and scoliosis curve flexibility should be explored to confidently compare the outcomes of conventional, CAD-CAM, and CAD-FEM methods.

Polymorphic Diversity of UBX Domain D from cDNA Isolated from Pectoral Muscle of Korean Native Chicken

Sangsoo Sun,Abdolreza Kamyab,Jeff Firman 韓國家禽學會 2011 韓國家禽學會誌 Vol.38 No.3

The objectives of this study are to identify specific functional genes which are related with growth and protein structure of the pectoral muscle of Korean native chicken. Pectoral muscle was isolated from three Korean native chickens (KNC, red brown, 12 months old, 2.41 ± 0.24 kg) and three Cornish chickens (16 month old, 2.76 ± 3.0 kg). The subtraction cDNA library was prepared in PCR4 Blunt-TOPO vector. The DNA sequence homology was compared with other breeds and species in GenBank. A clone NDS-81 was found to be unique for the DNA sequence homology with UBX family. Their partial sequence has high homology (98%) with chicken UBX domain D. Chicken UBX domain has chicken (93%), cattle (68%), dog (67%), mouse (64%) and, human (63%) nucleotide sequence homology. Several regions were mutated from T in chicken to C or G in the NDS-81 clone. The first site is LAD in chicken, but it was expressed as (L)RM in clone NDS-81. In this site, amino acids were changed from Ala to Arg, and from Asp to Met. The second site was changed from ER (Arg) in chicken to ED (Asp) in clone NDS-81. They are both containing functional side chains and play an important role in binding other proteins. Therefore, the clone NDS-81 could be a different candidate gene for the UBX family gene and could related with pectoral muscle structure of Korean native chicken.

Methodology for Testing Rebar-Concrete Bond in Specimens from Decommissioned Structures

Karin Lundgren,Samanta Robuschi,Kamyab Zandi 한국콘크리트학회 2019 International Journal of Concrete Structures and M Vol.13 No.5

Mimicking natural deterioration in accelerated tests is challenging; a highly relevant alternative option is to use deteri-orated specimens from decommissioned structures. This paper describes a methodology to select and design tests of the bond and anchorage between reinforcement and concrete in such specimens, with the aim of providing general information, needed when developing methods for assessing structures in general. The methodology includes the following steps: (1) choice of existing structure for samples, (2) choice of test method, (3) design of test setup, and (4) design of test programme. Each step is discussed in detail and comments are made on considerations and challenges arising specifically due to the use of specimens from existing structures. As the scatter of test results is typically large, a suitable test method should enable a large number of tests by being robust, quick and affordable. It is recommended to keep track of the position of the specimens in the original structure, to document cracks, and to take samples also of uncorroded bars. These can then be used for reference in quantifying the corrosion level of corroded bars. This methodology is exemplified in the design of three test series on edge beams from two bridges; two series resulted in beam test setups and one in direct pull-out tests. The methodology described strongly highlights that careful investigations are required to design experiments which generate reliable data. Acquiring data from decommissioned structures will improve our understanding of the structural behaviour of existing structures and thus enable improved assessment methods.

The Effect of Brace Treatment on Large Curves of 40° to 55° in Adolescents With Idiopathic Scoliosis Who Have Avoided Surgery: A Retrospective Cohort Study

Reza Razeghinezhad,Mojtaba Kamyab,Taher Babaee,Mohammad Saleh Ganjavian,Shahrbanoo Bidari 대한척추신경외과학회 2021 Neurospine Vol.18 No.3

Objective: To evaluate the effect of Milwaukee brace treatment on adolescents with idiopathic scoliosis (AIS) with large curves (40° to 55°) who refuse to do surgery. Methods: In this retrospective cohort study, we gathered the clinical records of all adolescents with AIS with an initial curve of 40° to 55°. They had been referred to our center from December 1990 to January 2017. Although they had been advised to do surgery, they had all refused to do it. Their clinical data were recorded, such as sex, age, Risser sign, scoliosis, and kyphosis curve magnitude (at the beginning of brace treatment, weaning time, brace discontinuation, and minimum of 2 years after the treatment). Based on treatment success, the patients were divided into 2 groups: progressed and nonprogressed. Results: Sixty patients with an average initial Cobb angle of 44.93°±4.86° were included. The curve progressed in 57%, stabilized in 25%, and improved in 18% of the patients. In the progressed group (34 patients), 31 patients had undergone surgery. There was no significant association between the age of beginning the brace treatment and the final Cobb angle of nonprogressed group (p>0.05). However, in-brace correction and initial Risser sign had a significant correlation with curve magnitude at the final follow-up (p<0.05). Conclusion: Brace treatment seems to be effective in controlling the further curve progression in AIS with 40° and 55° curves. Our results can help physicians make sound decisions about the patients with larger curves who refuse to do surgery.

Cross-Cultural Adaptation and Validation of the Persian Version of the 24-Item Early-Onset Scoliosis Questionnaire

Esfandiari Mahmood,Babaee Taher,Kamyab Mojtaba,Kamali Mohammad,Matsumoto Hiroko,Ghandhari Hassan,Vitale Michael G. 대한척추외과학회 2022 Asian Spine Journal Vol.16 No.1

Study Design: Cross-sectional study.Purpose: To translate and culturally adapt the original English version of the 24-item Early-Onset Scoliosis Questionnaire (EOSQ-24) to the Persian language as well as assess its reliability and validity.Overview of Literature: Early-onset scoliosis (EOS) patients with progressive curves require active treatments, such as serial elongation– derotation–flexion casting, bracing, and surgery, which are stressful and expensive. In order to evaluate the impact of EOS and its treatment strategies, it is important to consider the patients and their parents’ quality of life as the clinical and radiological parameters. The EOSQ-24 is a parent-based measure that evaluates the health-related quality of life of patients with EOS and their caregivers/parents. Similar to other widely used questionnaires, EOSQ-24 needs to be translated into other languages to make it usable in populations from different cultures and societies.Methods: We evaluated the translation and back translation of the EOSQ-24 and made the required revisions as per the analysis performed by the expert committee and an international guideline to adapt it for use in this study. Thereafter, we recruited 100 EOS patients in order to evaluate its reliability and validity. The reliability was assessed with internal consistency. Convergent validity was assessed by comparing the scores of the EOSQ-24 and the 22-item Scoliosis Research Society Questionnaire (SRS-22r). Finally, the known groups validity was assessed as per patient’s sex, curve magnitude, and treatment type.Results: The Persian EOSQ-24 demonstrated very good internal consistency (Cronbach’s α=0.88). All the items had an acceptable corrected item-total correlation (>0.3). Further, the EOSQ-24 and the SRS-22r scores (p <0.001) were significantly correlated. The EOSQ-24 could discriminate patients with different curve magnitudes.Conclusions: The Persian EOSQ-24 can serve as a disease-specific instrument with strong validity and reliability in the evaluation of EOS patients. Its applicability in other Persian-speaking countries and regions of the world needs to be investigated further.