http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Peng Li,Xiaoxiao Ma,Yurong Liang,Junhua Tan,Liyong Wang 한국탄소학회 2019 Carbon Letters Vol.29 No.6
Nanoporous carbon/MnO2 (C–MnO2) composites with foam-like structure based on modified nitrile butadiene rubber were achieved by thermal treatment, followed by alkaline solution etching and dipping method. The XRD, nitrogen adsorption and desorption, and SEM and TEM were used to characterize the microstructure of the obtained C–SiO2, C and C–MnO2. Finally, all the obtained samples have been used in three-electrode system to study the electrochemical properties including cyclic voltammetry, galvanostatic charge/discharge and AC impedance for supercapacitor. The study found that the specific capacity of C–MnO2 electrode material for supercapacitor could reach as high as 109 F/g under the current density of 0.5 A/g, which is much higher than those of the other two. These superior electrochemical properties are attributed to the synergistic effect MnO2 particles with the C matrix which functions as a conductive support.
Facile Fabrication of MCo2S4(M = Mn, Ni) Nanotube Arrays for High-Performance Supercapacitors
Peng Li,Xiaoxiao Ma,Fei Liu,Junhua Tan,Yanliang Zhao,Liyong Wang,Kaijin Zhu 대한금속·재료학회 2019 ELECTRONIC MATERIALS LETTERS Vol.15 No.4
MCo2S4(M = Mn, Ni) nanomaterials are attracting considerable attention because of their unique nanostructure, good redoxproperties, excellent theoretical capacitance, low cost and easy preparation. Herein, MCo2S4(M = Mn, Ni) nanotube arrayshave been fabricated by a one-pot hydrothermal method and could be used as conductive additive and binder-free electrodesfor supercapacitors. The results show that the specific capacitance of MCo2S4(M = Mn or Ni) nanotube arrays could reachas high as 2667 and 1623 F/g at the current density of 10 A/g, respectively, indicating high rate performance. Furthermore,the MnCo2S4nanotube arrays exhibited excellent cycling stability (68% of initial specific capacitance after 1800 cycles). These excellent electrochemical properties benefit from the synergistic effects of unique tubular microstructure and highconductivity of the samples.
Li Peng,Ma Xiaoxiao,Liang Yurong,Tan Junhua,Wang Liyong 한국탄소학회 2019 Carbon Letters Vol.29 No.6
Nanoporous carbon/MnO2 (C–MnO2) composites with foam-like structure based on modified nitrile butadiene rubber were achieved by thermal treatment, followed by alkaline solution etching and dipping method. The XRD, nitrogen adsorption and desorption, and SEM and TEM were used to characterize the microstructure of the obtained C–SiO2, C and C–MnO2. Finally, all the obtained samples have been used in three-electrode system to study the electrochemical properties including cyclic voltammetry, galvanostatic charge/discharge and AC impedance for supercapacitor. The study found that the specific capacity of C–MnO2 electrode material for supercapacitor could reach as high as 109 F/g under the current density of 0.5 A/g, which is much higher than those of the other two. These superior electrochemical properties are attributed to the synergistic effect MnO2 particles with the C matrix which functions as a conductive support.