http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Joonhyuk Son,Jung-Han Kim,Ji Young Seong,Nayoon Hur,Jun-Ho Choe,Jee Soo Kim 대한종양외과학회 2017 Korean Journal of Clinical Oncology Vol.13 No.2
Purpose: To analyze clinical outcomes of sentinel lymph node (SLN) biopsy in lower extremity melanoma with dual-basin drainage on lymphoscintigraphy. Methods: We retrospectively analyzed patients with lower extremity melanoma who underwent lymphoscintigraphy and SLN biopsy in a single center between 2006 and 2015. Gamma probe was used to detect SLNs. For dual-basin drainage, we regarded a basin that showed a two-fold greater radioactivity value than the others as a ‘dominant’ basin. SLN biopsy was performed only for the dominant basin. If two basins showed similar radioactivity, biopsy was conducted for both. Results: One hundred and seven patients underwent preoperative lymphoscintigraphy, and 29 dual (popliteal, inguinal) drainages were found. Of the 29 melanomas with dual drainage, seven showed similar radioactivity on both basins, 22 showed inguinal as the dominant basin and no melanoma had a dominant popliteal basin. Among the seven patients who underwent dual-basin biopsy, six had negative results, all of which experienced no recurrence during follow-up. Among the 22 patients who underwent biopsy of the dominant inguinal basin, 19 had negative results. During the follow-up, these patients showed six recurrences, but none of them experienced popliteal recurrence. All three patients who had tumor-positive inguinal node experienced recurrence in the popliteal basin as well as at other sites. Conclusion: For melanomas showing dual-basin drainage on lymphoscintigraphy, performing SLN biopsy only on the dominant (inguinal) basin is reliable when the dominant basin shows negative results. However, considering the recurrence pattern of our data, a tumor-positive dominant basin should prompts an SLN biopsy of the other basin.
오승엽(Seung-Yeop Oh),최재성(Jae-Sung Choi),손병락(Byung-Rak Son),이동하(Dong-Ha Lee),유준혁(Joonhyuk Yoo) 한국정보과학회 2012 한국정보과학회 학술발표논문집 Vol.39 No.1A
생체모방로봇은 인간을 비롯하여 새, 곤충, 물고기 등 동물들의 기본구조, 행동원리 및 메커니즘을 모방한 로봇이다. 정찰, 수색, 테러진압 등 군사작전에서부터 인명구조까지 생체모방로봇은 인간의 눈과 발을 대신하여 인간이 접근할 수 없는 오염 지역을 면밀히 탐지하는 데에도 유용하리라 예상된다. 이와 같은 생체모방로봇이나 MAV등을 실시간으로 원격에서 모니터링하고 제어할 수 있는 DAQ 시스템의 중요성이 커지고 있다. 본 논문에서는 생체모방로봇인 가오리를 원격 관제 센터에서 RF무선통신을 이용하여 안정적인 제어 및 모니터링이 가능한 DAQ(Data AcQuisition) 시스템을 제안한다.
정민호(Minho Jung),김동현(Donghyon Kim),안석의(Seokeui An),손창효(Changhyo Son),윤정인(Jungin Yoon),설성훈(Sunghoon Seol),이준혁(Joonhyuk Lee),정한솜(Hansom Jeong),차승윤(Seungyun Cha) 한국해양환경·에너지학회 2021 한국해양환경·에너지학회 학술대회논문집 Vol.2021 No.10
현재 국내에서는 파리기후협약을 위해 2030년까지 전체 발전량의 20%를 재생에너지로 공급하는 목표를 세웠으며, 신재생에너지 중 1.6%를 해양에너지로 공급하고자 하는 계획을 가지고 있다. 조류발전은 풍력발전보다 에너지 밀도가 높고 출력을 정확하게 예측할 수 있는 장점이 있다. 그러나 조류발전의 경우 풍력발전 대비 냉각방식이 제한적이며, 적절한 냉각이 이루어지지 않을 경우 발전기 성능 저하 및 화재의 위험이 존재한다. 따라서 본 연구에서는 열유체 유동해석을 통해 조류발전기의 냉각시스템에 대한 냉각성능을 분석하였다. 시뮬레이션을 위하여 발전기의 발열량은 안전율 등을 고려하여 발전량의 10%인 130kW로 가정하였다. 발전기 고정자의 냉각에는 고정자 내부에 냉각관을 삽입하는 것으로 설계하였으며, 냉각관의 냉각에는 청수를 사용하며, 청수의 냉각에는 해수를 사용하는 것으로 고려하였다. 시뮬레이션 결과 End Winding의 온도가 86.8℃로 분석되어 목표 유지온도보다 낮은 것을 확인하였으나, 유량의 분배가 원활하지 않아 유체의 압력분포가 일정하지 않음을 알 수 있었다. Currently, in Korea, for the Paris climate agreement, the goal of supplying 20% of the total power generation from renewable energy by 2030 is set, and 1.6% of the renewable energy is to be supplied as marine energy. The tidal power generation using marine energy has a higher energy density than wind power generation and the output is easier to predict. However, in the case of tidal power generation, since the cooling method is limited compared to wind power generation, if proper cooling is not performed, there is a risk of deterioration of generator performance and fire. Therefore, in this study, the cooling performance of the cooling system of the tidal generator was analyzed through thermal fluid flow analysis. The assumptions for the simulation analysis are as follows. The heat generation of the generator was assumed to be 130kW, which is 10% of the power generation in consideration of the safety factor. To cool the generator stator, a cooling tube is inserted inside the stator. Freshwater was used to cooling the cooling tube, and seawater was used to cool the freshwater. As a result of the simulation, the temperature of the end winding was observed to be 86.8℃, and it was confirmed that it was lower than the target maintenance temperature.