우리나라 노인여성의 골다공증성 척추골절로 인한 경제적 부담 추계

강혜영,강대룡,장영화,박성은,최원정,문성환,양규현,Kang, Hye-Young,Kang, Dae-Ryong,Jang, Young-Hwa,Park, Sung-Eun,Choi, Won-Jung,Moon, Seong-Hwan,Yang, Kyu-Hyun 대한예방의학회 2008 예방의학회지 Vol.41 No.5

Objectives : To estimate the economic burden of osteoporotic vertebral fracture (VF) from a societal perspective. Methods : From 2002 to 2004, we identified all National Health Insurance claims records for women ${\geq}50$ years old with a diagnosis of VF. The first 6-months was defined as a "clearance period," such that patients were considered as incident cases if their first claim of fracture was recorded after June 30, 2002. We only included patients with ${\geq}$ one claim of a diagnosis of, or prescription for, osteoporosis over 3 years. For each patient, we cumulated the claims amount for the first visit and for the follow-up treatments for 1 year. The hospital charge data from 4 hospitals were investigated to measure the proportion of the non-covered services. Face-to-face interviews were conducted with 106 patients from the 4 study sites to measure the out-of-pocket spending outside of hospitals. Results : During 2.5 years, 131,453 VF patients were identified. The patients had an average of 3.38 visits, 0.40 admissions and 6.36 inpatient days. The per capita cost was 1,909,690 Won: 71.5% for direct medical costs, 20.6% for direct non-medical costs and 7.9% for indirect costs. The per capita cost increased with increasing age: 1,848,078 Won for those aged 50-64, 2,084,846 Won for 65-74, 2,129,530 Won for 75-84and 2,121,492 Won for those above 84. Conclusions : Exploring the economic burden of osteoporotic VF is expected to motivate to adopt effective treatment options for osteoporosis in order to prevent the incidence of fracture and the consequent costs.

양성 백악모세포종에 관한 연구

최원재,최의환 大韓口腔顎顔面 放射線學會 1994 Imaging Science in Dentistry Vol.24 No.2

The benign cementoblastoma is a benign odontogenic tumor of cemental-forming tissue, which has an unlimited growth potential. The radiographic appearance of the lesion is pathognomonic and consists of a radiopaque mass surrounded by a thin radiolucent line. This mass is inseparable, radiologically, from the tooth root and is attached to it. Microscopic evaluation suggests that the lesion enlarges by peripheral growth, with the center of the neoplasm being more calcified and inactive than the periphery. We have observed two cases of beneign cementoblastoma(mature calcified stage) occured in the left mandibular first molar of 22-year-old man and 14-year-old man.

簡易方法에 依한 濟州馬의 骨瓊度別 Ca와 P의 含量測定

崔正煥,李元暢 中央醫學社 1976 中央醫學 Vol.30 No.1

The authors indeed to biometric study on the amounts of calcium and phospharus in the bone of Jeju horse in Korea. The measurement of hardness of bone were performed in 108 Jeju horse by caliper by Torybaos method. As a result of this studies, the following conclusion were obtained; (1) The correlation coefficient between grade of bone hardness and amounts of Ca and P mg per 100mm3 of bone were r=±0.972 in Jeju horse, these were statistically high significant (p<0.01) and the regression equation was y=1.795x+6.658. (2) The average of amounts of Ca and P by the undirected method were 41.58± 3.39mg/100mm3 of bone. (3) The correlation coefficient between age and amounts of Ca and P mg per 100mm3 of bone were r=+0.358(p<0.0l) and the regression equation was y=0.57x+39.85.

인접건물에 의한 반사주광 성능에 대한 평가

최원기,이동권,안명환,서승직 대한건축학회 2004 대한건축학회논문집 Vol.20 No.6

This paper is focused on evaluation of daylight reflecting performance from the adjacent building for improvement of poor environment conditions in a metropolitan area. The numerical model developed can be used for evaluation of daylight reflecting performance. As a result comparison of our simulation programs and commercial softwares, it was verified that there was no difference between two results. In this study, the sensitivity analysis of environmental performance factors of daylight reflecting from the adjacent building were examined, analysed and presented as a solution method for improvement of building environments. The results were proved to be an effective control methods for improvement of building environment, especially in a metropolitan area.

고속 HMC 이송계의 운동특성 평가 및 운동오차 예측

최헌종,허남환,강은구,이석우,홍원표 한국공작기계학회 2004 한국공작기계학회 추계학술대회논문집 Vol.2004 No.-

Recently, the evolution in production techniques (e.g. high-speed milling) and the complex shapes involved in modern production design has been increasingly popular. The key to the achievement is a drastic improvement of the dynamic behavior of the machine tool axes used in production machinery. The more complex these tool paths the higher the speed and acceleration requirements. But it is very difficult to reach the target for high speed machine tool because of the limitations of servo system and motion control system. However the direct drive design of machine tool axes, which is based on linear motors and which recently appeared on the market, is a viable candidate to meet the ever increasing demands, because of these advantages such as no backlash, less friction, more mechanical simplicity and very higher acceleration and velocity comparing to the traditional system. This paper focused on the performance tests of the high speed horizontal machine tool based on linear motor. Especially, dynamic characteristics were investigated through circular test and circular form machining test is carried out considering many important parameter. Therefore these several experiments is used to be evaluated the model for prediction of circular motion error and circular machined error.

마이크로머시닝을 이용한 Bump형 Probe Card의 제조

최원익,김용대,심준환,이종현 경북대학교 센서기술연구소 1998 센서技術學術大會論文集 Vol.9 No.1

Probe card is the most important part of testing IC chips. This work was related to silicon vertical probe card which enabled to simultaneously test multiple semiconductor chips. We presented Bump-type vertical probe card. It was fabricated by dry etching using RIE technique, isotropic etching, and bulk-micromachining on SDB wafer. The process used in this work was very simple and reproducible, which had good controllability in the probe card dimension and spacing. It is expected that the fabricated probe card can reduce testing time, can promote productivity and enables bum-in test.

재조합 균주 Bacillus subtilis LKS88에 의한 Streptomyces albus KSM-35 Amylase의 생산조건

최원진,유도진,이재우,소명환,김영배 한국식품영양학회 1998 韓國食品營養學會誌 Vol.11 No.4

Streptomyces albus KSM-35의 amylase의 유전자를 Bacillus subtilis LKS88에서 발현시킨 균주를 사용하여 amylase의 생산에 미치는 몇가지 요인들을 조사하였다. 본 실험에 사용한 탄소원들중에서 sodium citrate와 왕겨의 효소 생산량이 가장 높았고, 이들을 1:1의 비율로 혼합하여 첨가하였을 때 효소의 생산량은 대조군으로 사용한 가용성 전분에 비하여 20배 이상 증가하였다. 질소원으로 대두박을 사용하였을 경우 yeast extract의 첨가량을 줄이면서 효소의 생산량을 증가시켰다. 배양을 위한 초기 pH를 60으로 조절하고 SDS를 0.01%첨가하였을 때 대조구조보다 높은 효소 생산량을 나타내었다. Bacillus subtilis LKS88 (pASA240)을 sodium citrate와 왕겨 각각 1.5%, K_2HPO_4 0.66%, yeast extract 0.3%, 대두박 0.7%, SDS 0.01% 및 초기 pH를 6.0으로 조절한 배지에서 37℃에서 배양시 최대 효소 활성은 배양 후 36시간에서 나타났으며 이때 효소 활성은 56.6 U/ml이었다. The effects of culture conditions on the production of amylase expressed by Bacillus subtilis LKS88 with a cloned gene from Streptomyces albus KSM-35 were investigated The production of amylase was increased significantly by using sodium citrate and rice hull as a carbon source. In addition, the use of a mixture of sodium citrate and rice hull(1:1) resulted in increase of enzyme production by 20-fold when compared to that of soluble starch. The soybean meal as the nitrogen source could be partially replaced with yeast extract without changing the enzyme production yield. The amylase production was also increased by adjusting initial pH to 6.0 or by adding 0.01% SDS. Maximum amylase production was observed in the medium containing 1.5% sodium citrate, 1.5% rice hull, 0.7% soybean meal, 0.3% yeast extract, 0.66% K_2HPO_4, 0.05% MgSO_4·7H_2O, 0.08% CaCl_2·2H_2O, 0.01% SDS with initial pH of 6.0. The maximum yield of amylase reached 56.6 U/ml when B. subtilis LKS88(pASA 240) was cultured at 37℃ for 36 hr.

산화툴륨의 결함구조와 전기전도성에 대한 연구

최재시,정원양,김진호,이창환 연세대학교 자연과학연구소 1985 學術論文集 Vol.14 No.-

산화툴륨의 전기전도도를 400~1100℃의 온도영역과 10^-6~10^-1atm의 산소분압범위에서 측정하였다. 일정한 산소분압에서 전기전도도의 대수값을 절대온도의 역수에 대하여 도시한결과 직선관계를 얻었으며 inflection point가 나타났다. 활성화에너지는 고온영역에서 34.5kcal/mole, 저온영역에서 19.3kcal/mole이었다. 전기전도도의 산소분압의존성은 직선관계를 나타내었으며 600~1100℃의 온도영역에서 σ∝Po_2^1/5.3, 400~600℃의 온도영역에서σ∝Po_2^1/6.3이었다. 고온영역에서의 주결함은 V_??이며, 저온영역에서는 O_?? 임이 밝혀졌다. 전도도의 온도 및 산소분압의존성을 해석하였으며, 전도메카니즘을 제시하였다. The electrical conductivity of thulium sesquioxide has been measured from 400 to 1100℃ under oxygen partial pressure (Po_2) of 10^-6 to 10^-1 atm. Plots of log conductivity vs. 1/T at constant Po_2 are found to be linear with inflection point and the activation energies obtained from the slopes are 34.5kcal/mole in the higher temperature region and 19.3kcal/mole in the lower temperature region. The Po_2 dependences of the electrical conductivity are found to be linear and closely approximated by σ∝Po_2^1/5.3 in the temperature range of 600-1100℃ and σ∝Po_2^1/6.3 in the range of 400-600℃. The dominant defect is V_?? in the higher temperature region and O_?? in the lower temperature region. The interpretations of conductivity dependences on temperature and Po_2 are presented and conduction mechanisms are suggested to illustrate the data.

黃柏에서 抽出한 多糖類의 抗癌作用에 대한 硏究

최영철,홍희탁,홍영욱,이태균,박원환,김철호 동국대학교 경주대학 1997 東國論集 Vol.16 No.1

In order to investigate antitumor activities of the extracted polysaccharides from Phellodendron chinense SCHNEID, the following studies were carried out. Phellodendron chinense SCHNEID was extracted with hot water and alkali, and the extracted polysaccharides showed antitumor activities against mice Sarcoma-180 solid tumors in parameters of tumor weight, inhibition ratio, thymidilate synthetase(TS) and thymidine kinase(TK) activities. The results were as follows : 1. Delipidated extracts from Phellodendron chinense SCHNEID, were systematically fractionated, the heteropolysaccharide contains D-N-acetylglucosamine, D-galactose, D-mannose, D-glucose. The molecular weight distribution of the sample was found to be nearly homogeneous (about from 200 to 1000 kDa) in gel permeation analysis. 2. Among the polysaccharide fractions, the water extracted fractions, particularly Fr.-2, showed a potent growth-inhibitory activity against implanted in mice Sarcoma 180 solid tumor (inhibition, 95.3%, at 2 ㎎/100g), but the cold alkali extract (Fr.-4) showed a very low activity (inhibition; 4.7%). Fr.-7 and Fr.-8 showed the highest tumor inhibitory activity (inhibition; 96.4 and 98.2%, respectively). 3. TS activity in the Fr.-2 given oral administration of propolis was markedly suppresed to 73.7% of that in the control (p<0.01 by Student's t-test). However, there was little difference in TK activity with a slight decrease in Fr.-2 only.

양극산화와 절연파괴로 형성한 인산칼슘 함유 티타늄 산화피막의 특성

최원호,이용승,김동환,권용훈,배태성 大韓齒科器材學會 2003 대한치과재료학회지 Vol.30 No.1

This study was performed to investigate the surface properties of electrochemically oxidized pure titanium by anodic spark deposition technique. Titanium plates of 10×10×1 ㎜ were polished sequentially from # 300 to # 1,000 emery paper. They were ultrasonically washed in ethyl alcohol and acetone for 5 min and dried in a desiccator. Titanium plates and titanium screw implants were anodized in an electrolytic solution that was dissolved calcium and phosphate in water. The electrolytic voltage was set in the range of 190-340 V and the current density was 30 ㎃/㎠. The surface oxide film was characterized by X-ray deffractometer(XRD), scanning electron microscope(SEM) and X-ray photoemission spectroscopy(XPS). The main crystal structure of the titanium oxide was anatase type as analyzed with thin-film X-ray diffractometery. The diameter of micropores increased with increasing the spark forming voltage. The porous coatings showed the growth of cell structure and more compact texture with increasing the spark forming voltage. Microcracks were examined in the coating formed at voltage of 340 V. Ca/P ratio in coatings was increased with increasing the voltage.