EC Development in China

Wang,Guangming 한국통상정보학회 2004 통상정보연구 Vol.6 No.2

The paper describes the up going and frustration of electronic commerce development in China during the past ten years. All the changes are classified as EC application trends and the trends on EC supporting environment construction. Later, some problems affecting EC development are raised, and one of them: social credit system construction is discussed in detail. The trends of EC development discussed in the paper are based on the practices in China, but it is generally analogous in the rest of the world.

EC Development in China

Wang, Guangming 한국통상정보학회 2004 통상정보연구 Vol.6 No.2

The paper describes the up going and frustration of electronic commerce development in China during the past ten years. All the changes are classified as EC application trends and the trends on EC supporting environment construction. Later, some problems affecting EC development are raised, and one of them: social credit system construction is discussed in detail. The trends of EC development discussed in the paper are based on the practices in China, but it is generally analogous in the rest of the world.

Stiffness effects on repeatability of positioning of linear axes

Guangming Sun,Yimiao Wang,Wenjin Wang,Jinjun Liu,Ming Yu,Jian Zhao 대한기계학회 2022 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.36 No.9

This paper studies the effect of stiffness (including slider stiffness and bearing stiffness) on the repeatability of the positioning of linear axes. First, a mathematical model between stiffness and the repeatability of the positioning of linear axes is established. The effects of the stiffness of the slider and bearing on the repeatability of positioning are analysed. The theoretical results show that the repeatability of the positioning decreases as the slider component stiffness and bearing stiffness increases. Second, a finite element analysis is implemented to calculate the effect of slider stiffness on the repeatability of positioning, the simulation results are found to be consistent with the theoretical results. Finally, the effect of bearing stiffness on the repeatability of positioning is experimentally investigated. The experimental and theoretical analysis results have been observed to coincide. Thus, the accuracy of the theoretical analysis is verified by both simulation and experimental results. The derived results afford designers and engineers a scientific basis for the stiffness design theory.

HMM and HSS Based Social Behavior of Intelligent Vehicles for Freeway Entrance Ramp

Guangming Xiong,Yong Li,Shiyuan Wang,Xiaoyun Li,Peng Liu 보안공학연구지원센터 2014 International Journal of Control and Automation Vol.7 No.10

In this paper, a novel approach of intelligent vehicle to interact and cooperate with other human driving vehicles is proposed at the freeway entrance ramp scenario. The system consists of a Safety Alert Module and Vehicle Control Module. The Safety Alert System module includes intention estimation and conflict judgment. A two dimension Hidden Markov Model (2DHMM) is used to estimate social vehicle’s driving intention in the intention estimation module. Then the conflict judgment module predicts the potential conflicts between the intelligent vehicle and social vehicle. Moreover, the hybrid state system (HSS) is introduced to control the intelligent vehicle while considering its decision making, states and dynamics. Co-simulation using PreScan and Simulink is conducted. The experiment results show that the intelligent vehicle performs well with a commendable social behavior in the freeway entrance ramp.

Direct Determination of Uric Acid in Human Serum Samples Using Polypyrrole Nanoelectrode Ensembles

Guangming Yang,Lin Tan,Ya Shi,Suiping Wang,Xuxiao Lu,Huiping Bai,Yunhui Yang 대한화학회 2009 Bulletin of the Korean Chemical Society Vol.30 No.2

Polypyrrole (PPy) nanotubes have been synthesized by chemical oxidative polymerization of pyrrole within the pores of polycarbonate membrane using the technology of diffusion of solutes. The nanotubes array prepared by the proposed method can be considered as nanoelectrode ensembles (NEEs). An amperometric uric acid sensor based on PPy NEEs has been developed and used for determination of uric acid in human serum samples. The electrode can direct response to uric acid at potential of 0.60V vs. SCE with wide linear range of 1.52×10-6 to 1.54×10-3 M. The detection limit is 3.02×10-7 M. This sensor has been used to determine uric acid in real serum samples. PPy NEEs is thought of as a good application in the foreground.

Microstructural and Mechanical Properties of TiCX–Ni3(Al,Ti)/Ni Functionally Graded Composites Fabricated from Ti3AlC2 and Ni Powders

Guangming Zheng,Zhenying Huang,Qun Yu,Wenqiang Hu,Xingyang Qiu,A. Lixia,Yuanbo Wang,Yidan Jiao,Yang Zhou,Hongxiang Zhai 대한금속·재료학회 2020 METALS AND MATERIALS International Vol.26 No.6

In this paper, a novel type of functionally graded material (FGM) was successfully fabricated from pure Ni and Ti3AlC2powder mixtures by hot-press sintering route at 1200 °C and 17 MPa. In each layer, Ti3AlC2particles transformed into TiCxphase, while the additional Al–Ti atoms decomposed from Ti3AlC2diffused into the Ni matrix, giving rise to the formationof γ′-Ni3(Al,Ti). Part of the submicron TiCxand Ni3(Al,Ti) particles were uniformly distributed in the Ni matrix, whilesome of the TiCxmaintained the original Ti3AlC2plate-like morphology. Both TiCxand Ni3(Al,Ti) content decreased from60Ti3AlC2/Ni layer to 10Ti3AlC2/Ni layer in a stepwise manner was fabricated. The microstructural analysis indicatesthat no cracks, delamination and step-type abrupt changes occured in the graded layer of the manufactured FGM. Flexuralstrength and Vickers hardness enhanced with the increasing Ti3AlC2content except for fracture strain and toughness. Theoverall fracture toughness and the flexural strength of FGM can reach 21.76 MPa m1/2 and 1329 ± 34 MPa, respectively. Theprepared FGM, herein, with a hard ceramic surface on one side to resist local plastic deformation, and a ductile metallicsurface on the other side to provide toughness.

Automatic Optical Inspection of Bump Offsets in Flex-on-glass Bonding Using Differential Interference Contrast Imaging

Guangming Ni,Lin Liu,Jing Zhang,Juanxiu Liu,Xiangzhou Wang,Xiaohui Du,Huimin Yue,Yong Liu 한국정밀공학회 2020 International Journal of Precision Engineering and Vol.21 No.2

Bump offsets have harmful effects on the quality of flex-on-glass (FOG) bonding in liquid crystal display (LCD) module industry. Here we report a novel automatic optical inspection (AOI) method to achieve fast inspecting FOG bonding bump offsets. Overcoming difficulties to image targets at different depths in light absorption medium when using ultra-short-exposure and high-speed imaging, the proposed method innovatively achieves inspecting FOG bonding bump offsets using differential interference contrast imaging based on spatial Poisson point process approximation. Theoretical analysis proves that the proposed method has high reliability in FOG bonding bump offset AOI inspection. Experimental results show missed detection rate of the inspection algorithm is 0.01%, and false rate is 0.1%, and verify the accuracy and validity of the proposed method, all of which are significant for guiding practice in LCD module industry.

Bio-based Epoxy Thermoset Containing Stilbene Structure with Ultrahigh T<SUB>g</SUB> and Excellent Flame Retardancy

Guangming Lu,Xuezhen Wang,Na Teng,Jingyuan Hu,Liyue Zhang,Jinyue Dai,Yongjia Xu,Sakil Mahmud,Xiaoqing Liu 한국고분자학회 2021 폴리머 Vol.45 No.4

Bio-based epoxy resins with an ultrahigh glass transition temperature (Tg) and excellent flame retardancy are critical for developing sustainable polymers. Herein, a novel trifunctional epoxy monomer triglycidyl ether of resveratrol (TGER) was synthesized from renewable resveratrol. The chemical structure of TGER was confirmed by Fourier transform infrared (FTIR), ¹H, and <SUP>13</SUP>C nuclear magnetic resonance (NMR) spectroscopy which was then reacted with 4,4’-diaminodiphenylmethane (DDM) to form resin. The obtained resin was evaluated in terms of flame retardance and thermal properties. The resultant TGER-DDM 240 resin shows excellent flame-retardant properties, presenting a residual char of 42.5% at 800 ℃, limiting oxygen index (LOI) of 31.2%, and flammability rating of V-0 in UL94 test. Moreover, the resin possesses an ultrahigh Tg at 294 ℃. This work provides a facile method for preparing high-performance flame-retardant epoxy resin from a renewable resource.

An Improved Spatially Selective Noise Filtration for Real-time Denoising of Acoustic Emission Signal

Jian Wang,Guangming Li,Peng Sun,Ruijuan Jiang,Yiyan Chen 보안공학연구지원센터 2015 International Journal of Signal Processing, Image Vol.8 No.7

The denoising of acoustic emission (AE) signal plays an important role in structural health monitoring. This paper proposes the improved spatially selective noise filtration (SSNF) which can eliminate the Gaussian white noise well. Firstly, through the comparison of different vanishing moments, “db5” is chose as the mother wavelet. And the Mallat algorithm is used in the composition and reconstruction of signal processing. Secondly, according to the signal noise ratio of wavelet reconstructed coefficients of AE signal, two coefficients are chosen to the next step. Lastly, the denoising algorithm uses the high degree of correlation between coefficients to realize the improved SSNF. Compared with the SSNF, the improved SSNF can avoid “glitches” and realize real-time denoising. And according to the simulation results, the improved SSNF can realize real-time denoising of AE signal.

A New Boiler-turbine-heating Coordinated Control Strategy to Improve the Operating Flexibility of CHP Units

Wei Wang,Guangming Zhang,Yuguang Niu,Zhenyu Chen,Peiran Xie,Zhe Chen 제어·로봇·시스템학회 2022 International Journal of Control, Automation, and Vol.20 No.5

The operating flexibility of the power units is getting increasing attention from power systems especially those with large-scale fluctuating renewable energies. However, the combined heat and power (CHP) units are getting a bottleneck because their electricity productions are restricted by heat productions. This study aims to develop an electric-heat coordinated control strategy to make the CHP units more flexible. First of all, the dynamic model for a 300 MW CHP unit is set up, and its linear state-space description is obtained. A control strategy based on linear quadratic regulator (LQR) is then developed to satisfy different heat-power demands in various operating conditions. The control weights Q and R are optimized by particle swarm optimization. Moreover, the improved coordinated control strategy based on precise energy balance is put forward to increase the CHP power ramp rate considering electricity priority strategy and recovery control of the heat source. Finally, the simulation results show that the improved strategy is suitable for various CHP operating scenarios, and the case for electricity priority and heat recovery control significantly improves the unit power rate on the premise of stable heat supply. This work provides a reliable and flexible control mode for CHP units, which can support the power system stability and renewable energy integration.