Finite Element Analysis and Experimental Research on Mechanical Performance of Bolt Connections of Corrugated Steel Plates

Gan Tang,Lingfeng Yin,Xiaoming Guo,Jin Cui 한국강구조학회 2015 International Journal of Steel Structures Vol.15 No.1

Fabricated corrugated steel silos are widely used for grain storage, and the corrugated steel plates with bolt lap connectionsare often used as the silo wall. This paper aims to research the mechanical performance of bolt connections of corrugated steelplates. Experiments were conducted for eight groups of specimens subjected to various parameters. The finite element modelstook into account the material nonlinearities, geometry nonlinearities and contact nonlinearities. The major factors (platethickness and wave height) were selected, and parametric studies were performed. It is found that the ultimate bearing capacitiesof corrugated steel plate specimens are smaller than those of the flat steel plate specimens, and the ultimate displacements ofthe former are larger than those of the latter. The attaching degree between the nuts and the steel plates is a primary factor ofthe difference. The finite element results are in good agreement with the experimental results. The ultimate bearing capacityof single-bolt connections of corrugated steel plates shows an increasing trend with the increase in plate thickness, and theultimate displacement and ultimate bearing capacity both increase as the wave height decreases. When the wave height of thespecimen decreases to 0 mm, the ultimate bearing capacity and ultimate displacement increase significantly.

Effects of Sown Season and Maturity Stage on In vitro Fermentation and In sacco Degradation Characteristics of New Variety Maize Stover

Tang, S.X.,Li, F.W.,Gan, J.,Wang, M.,Zhou, C.S.,Sun, Z.H.,Han, X.F.,Tan, Z.L. Asian Australasian Association of Animal Productio 2011 Animal Bioscience Vol.24 No.6

The effects of seedtime and maturity stage on nutritive value of five maize stover varieties, including conventional maize (Kexiangyu 11, CM), fodder maize (Huqing 1, FM), high oil maize (Gaoyou 115, HOM), sweet maize (Kexiangtianyu 1, SM) and waxy maize (Kexiangluoyu 1, WM), were examined based on chemical composition, in vitro gas production and in situ incubation techniques. Maize stover was sampled at d 17 and d 30 after tasseling, and designated as maturity stage 1 and stage 2, respectively. The average dry matter (DM) organic matter (OM), crude protein (CP) and fiber contents were the greatest for HOM, SM and FM, respectively. CM had the highest in vitro organic matter disappearance (IVOMD) and volatile fatty acid (VFA) concentration. The highest ammonia nitrogen ($NH_3$-N) concentration in the incubation solution, and effective degradability of DM ($ED_{DM}$) and neutral detergent fiber ($ED_{NDF}$) were observed in SM. Advanced maturity stage increased (p<0.05) DM content, $ED_{DM}$ and $ED_{NDF}$, but decreased (p<0.05) OM and CP contents, and decreased (p<0.05) b and a+b values, IVOMD and molar proportion of valerate in the incubation solution for maize stover. Maize sown in summer had greater (p<0.05) OM content, but lower DM, CP, neutral detergent fiber (NDF) and acid detergent fiber (ADF) content compared with maize sown in spring. Maize sown in summer had greater (p<0.001) IVOMD, $NH_3$-N concentration in the incubation solution and $ED_{NDF}$, but lower (p<0.01) ratio of acetate to propionate compared to maize sown in spring. The interaction effect of variety${\times}$seedtime was observed running through almost all chemical composition, in vitro gas production parameters and in situ DM and NDF degradability. The overall results suggested that SM had the highest nutrient quality, and also indicated the possibility of selecting maize variety and seedtime for the utilization of maize stover in ruminants.

Multiscale Engineering of Wood Cell Walls toward the Sustainable, Recyclable, and High-performance Structural Materials

( Wentao Gan ),( Xiaofei Dong ),( Peiru Wang ),( Jianfu Tang ),( Yanjun Xie ),( Jian Li ) 한국목재공학회 2024 한국목재공학회 학술발표논문집 Vol.2024 No.1

Facile Synthesis of Ni–Mn Layered Double Hydroxide Nanopetals on 3D Reduced Graphene Oxide/Ni Foam for High-performance Supercapacitors

Qi Tang,Menghan Ye,Li Ma,Tao Zhou,Mengyu Gan,Fabing Yan 성균관대학교(자연과학캠퍼스) 성균나노과학기술원 2020 NANO Vol.15 No.03

In this work, the Ni–Mn layered double hydroxide (Ni–Mn LDH) nanopetals are fabricated on three-dimensional reduced graphene oxide/Ni foam (RGO/NF) by one-step hydrothermal method, in which the suspension of graphene oxide (GO) is directly reduced by nickel foam (NF) to obtain NF/RGO. The composite, which consists of interconnected Ni–Mn LDH nanopetals, forms a macroporous structure. Such an open space can promote electrolyte dispersion and ion diffusion of active substances, thus enhancing capacitance performance. Remarkable, during crystal growth, RGO can not only provide active sites for Ni–Mn LDH nanopetals, but also effectively connect Ni–Mn LDH nanopetals to NF, further promoting the electrochemical behavior of composite material. Moreover, RGO possess reasonable chemical stability which can improve the mechanical properties of the composite to obtain good stability. The experimental results show that the NF/RGO electrode material with Ni–Mn LDH nanopetals has excellent specific capacitance of 2250 F g -1 at 1 A g -1, good rate performance (the capacitance retention rate is still 64.0% at 10 A g -1) and excellent cycle life (45.1% at 10 A g -1 after 5000 cycles). NR/NM–LDH is used as the positive electrode and activated carbon is used as the negative electrode to assemble the asymmetric supercapacitor, the proper power density and energy density indicates that the NR/NM–LDH composite has great potential as an electrode material for supercapacitors.

Positive effects of porcine IL-2 and IL-4 on virus-specific immune responses induced by the porcine reproductive and respiratory syndrome virus (PRRSV) ORF5 DNA vaccine in swine

Deyuan Tang,Jian Liu,Chunyan Li,Hua Zhang,Ping Ma,Xianfeng Luo,Zhiyong Zeng,Nining Hong,Xia Liu,Bin Wang,Feng Wang,Zhenlei Gan,Fei Hao 대한수의학회 2014 JOURNAL OF VETERINARY SCIENCE Vol.15 No.1

The purpose of this study was to investigate the effects ofporcine interleukin (IL)-2 and IL-4 genes on enhancing theimmunogenicity of a porcine reproductive and respiratorysyndrome virus ORF5 DNA vaccine in piglets. Eukaryoticexpression plasmids pcDNA-ORF5, pcDNA-IL-2, andpcDNA-IL-4 were constructed and then expressed in Marc-145cells. The effects of these genes were detected using an indirectimmunofluorescent assay and reverse transcriptionpolymerase chain reaction (RT-PCR). Characteristicfluorescence was observed at different times after pcDNAORF5was expressed in the Marc-145 cells, and PCR productscorresponding to ORF5, IL-2, and IL-4 genes were detected at48 h. Based on these data, healthy piglets were injectedintramuscularly with different combinations of the purifiedplasmids: pcDNA-ORF5 alone, pcDNA-ORF5 + pcDNA-IL-2,pcDNA-ORF5 + pcDNA-IL-4, and pcDNA-ORF5 + pcDNAIL-4 + pcDNA-IL-2. The ensuing humoral immune responses,percentages of CD4+ and CD8+ T lymphocytes, proliferationindices, and interferon-γ expression were analyzed. Resultsrevealed that the piglets co-immunized with pcDNA-ORF5 +pcDNA-IL-4 + pcDNA-IL-2 plasmids developed significantlyhigher antibody titers and neutralizing antibody levels, hadsignificantly increased levels of specific T lymphocyteproliferation, elevated percentages of CD4+ and CD8+ Tlymphocytes, and significantly higher IFN-γ production thanthe other inoculated pigs (p < 0.05).

Multi-component optimization of a vertical inline pump based on multiobjective pso and artificial neural network

Xingcheng Gan,Ji Pei,Wenjie Wang,Shouqi Yuan,Yajing Tang 대한기계학회 2020 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.34 No.12

The vertical inline pump is a single-stage single-suction centrifugal pump with a curved inlet pipe before the impeller, which is widely used in where the constraint is installation space. In this paper, with the objective functions of efficiencies at 0.5 , d Q 1.0 , d Q and 1.5 , d Q a multi-objective optimization on inlet pipe and impeller was proposed to broaden the efficient operating period of a vertical inline pump. Two 5th order Bézier curves were adopted to fit the shape of the mid curve of the inlet pipe and the trend of the blade angle of the impeller. Fourteen design variables were selected after the data-mining process. 300 sample cases were generated using Latin hypercube sampling (LHS), and they were solved by 3D RANS code to obtain the objective functions. The feed-forward artificial neural network with a hidden layer and an output layer was adopted to fit the two objective functions and the 14 design variables. The Pareto frontiers were generated for the three objectives using multi-objective particle swarm optimization (MOPSO), and three different configurations on the Pareto front are selected for detailed study by computational fluid dynamics (CFD). The results showed that the profile of the inlet pipe and the blade have a dramatic impact on the performance of the vertical inline pump. The Pareto frontiers reported that the performance under the overload condition usually keeps stable when the nominal efficiency is lower than 82 %, or the part-load efficiency is lower than 62 %, and it will decrease rapidly after that. After optimization, the improvement of efficiencies at the part-load condition and nominal condition of the picked case were 9.65 % and 7.95 %, respectively.

Flexible self-supporting laser-induced graphene electrode devices for highly sensitive electrochemical analysis of Allura Red

Zeng Yanhong,Tang Yong,Gan Tian,Wu Can 한국탄소학회 2024 Carbon Letters Vol.34 No.3

Flexible self-supported laser-induced graphene (LIG) electrode devices were facilely fabricated through laser ablation technique by employing commercial polyimide film as the precursor material. Compared with the widely used traditional glassy carbon electrodes, the resulted LIG electrodes displayed abundant porous structure and surface defects. Notably, the one-step yielded LIG electrode devices were endowed with large electrochemically active surface area and accelerated electron transfer ability. Benefiting from its superior electrochemical property, these unmodified LIG electrodes exhibited remarkable enhanced electrochemical oxidation reactivity toward the food additive molecule Allura Red. Based on the augmented oxidation signal of Allura Red molecules on the LIG electrodes, a novel electrochemical sensor with high sensitivity for the detection of Allura Red was successfully developed. The sensor demonstrated a linear detection range spanning from 5 nM to 1 μM and exhibited a detection limit as low as 2.5 nM. Besides, the sensitivity was calculated to be 240.62 µA μM−1 cm−2. More importantly, the sensor manifested outstanding stability, reproducibility, and practicality, further emphasizing its potential for real-world application.

Prognostic Significance of C-reactive Protein in Urological Cancers: a Systematic Review and Meta-analysis

Dai, Jin,Tang, Kun,Xiao, Wei,Yu, Gan,Zeng, Jin,Li, Wei,Zhang, Ya-Qun,Xu, Hua,Chen, Zhi-Qiang,Ye, Zhang-Qun Asian Pacific Journal of Cancer Prevention 2014 Asian Pacific journal of cancer prevention Vol.15 No.8

Background: C-reactive protein (CRP), considered as a prototypical inflammatory cytokine, has been proposed to be involved in tumor progression through inflammation. Recent studies have indicated CRP as a progostic predictor for urological cancers, but the results remain controversial. Materials and Methods: A systematic search of Medline, Scopus and the Cochrane Library was performed to identify eligible studies published between Jan 1, 2001 and Sep 1, 2013. Outcomes of interest were collected from studies comparing overall survival (OS), cancer-specific survival (CSS) and relapse-free survival (RFS) in patients with elevated CRP levels and those having lower levels. Studies were pooled, and combined hazard ratio (HR) of CRP with its 95% confidence interval (CI) for survival were used for the effect size estimate. Results: A total of 43 studies (7,490 patients) were included in this meta-analysis (25 for RCC, 10 for UC, and 8 for PC). Our pooled results showed that elevated serum CRP level was associated with poor OS (HR: 1.26, 95%CI: 1.22-1.30) and RFS (HR: 1.38 95%CI: 1.29-1.47), respectively. For CSS the pooled HR (HR: 1.33, 95%CI: 1.28-1.39) for higher CRP expression could strongly predict poorer survival in urological cancers. Simultaneously, elevated serum CRP was also significantly associated with poor prognosis in the subgroup analysis. Conclusions: Our pooled results demonstrate that a high serum level of CRP as an inflammation biomarker denotes a poor prognosis of patients with urological cancers. Further large prospective studies should be performed to confirm whether CRP, as a biomarker of inflammation, has a prognostic role in urological cancer progression.

A Robotic Vision System for Turbine Blade Cooling Hole Detection

Jianjun Wang,Qing Tang,Zhongxue Gan 제어로봇시스템학회 2003 제어로봇시스템학회 국제학술대회 논문집 Vol.2003 No.10

Locating QTLs controlling overwintering seedling rate in perennial glutinous rice 89-1 (Oryza sativa L.)

Xiaoshu Deng,Lu Gan,Yan Liu,Ancai Luo,Liang Jin,Jiao Chen,Ruyu Tang,Lixia Lei,Jianghong Tang,Jiani Zhang,Zhengwu Zhao 한국유전학회 2018 Genes & Genomics Vol.40 No.12

A new cold tolerant germplasm resource named glutinous rice 89-1 (Gr89-1, Oryza sativa L.) can overwinter using axillary buds, with these buds being ratooned the following year. The overwintering seedling rate (OSR) is an important factor for evaluating cold tolerance. Many quantitative trait loci (QTLs) controlling cold tolerance at different growth stages in rice have been identified, with some of these QTLs being successfully cloned. However, no QTLs conferring to the OSR trait have been located in the perennial O. sativa L. To identify QTLs associated with OSR and to evaluate cold tolerance. 286 F12 recombinant inbred lines (RILs) derived from a cross between the cold tolerant variety Gr89-1 and cold sensitive variety Shuhui527 (SH527) were used. A total of 198 polymorphic simple sequence repeat (SSR) markers that were distributed uniformly on 12 chromosomes were used to construct the linkage map. The gene ontology (GO) annotation of the major QTL was performed through the rice genome annotation project system. Three main-effect QTLs (qOSR2, qOSR3, and qOSR8) were detected and mapped on chromosomes 2, 3, and 8, respectively. These QTLs were located in the interval of RM14208 (35,160,202 base pairs (bp))–RM208 (35,520,147 bp), RM218 (8,375,236 bp)–RM232 (9,755,778 bp), and RM5891 (24,626,930 bp)–RM23608 (25,355,519 bp), and explained 19.6%, 9.3%, and 11.8% of the phenotypic variations, respectively. The qOSR2 QTL displayed the largest effect, with a logarithm of odds score (LOD) of 5.5. A total of 47 candidate genes on the qOSR2 locus were associated with 219 GO terms. Among these candidate genes, 11 were related to cell membrane, 7 were associated with cold stress, and 3 were involved in response to stress and biotic stimulus. OsPIP1;3 was the only one candidate gene related to stress, biotic stimulus, cold stress, and encoding a cell membrane protein. After QTL mapping, a total of three main-effect QTLs—qOSR2, qOSR3, and qOSR8—were detected on chromosomes 2, 3, and 8, respectively. Among these, qOSR2 explained the highest phenotypic variance. All the QTLs elite traits come from the cold resistance parent Gr89-1. OsPIP1;3 might be a candidate gene of qOSR2.