Design of a Flyback Switching Power for Smart Meter

Fan jian-ying,Zhang Yu-ling,Shi Dong-qing 보안공학연구지원센터 2016 International Journal of Smart Home Vol.10 No.9

With switching power supply being widely used in Smart Meter, there exists more restrictions on the performance of it. This paper designs a single-ended flyback switching power supply based on LNK364DN chips which is used in intelligent single-phase table, Compares the advantages and disadvantages of the switching power supply and the traditional linear regulated power supply, and introduces the reaction type switching power supply design principle and working process. In order to satisfy the security requirements, this paper also designs the EMI suppression circuit, surge suppression current, clamp circuit, etc. The design process, including the maximum duty cycle including transformer, the primary inductance calculation, etc, of the flyback type switch power supply transformer is introduced in detail. The experimental results show that the switch regulated power supply has small volume, good electromagnetic compatibility, small ripple, low power consumption, high efficiency of AC/DC transform and excellent performance .

Strength of Double Skin Steel-Concrete Composite Walls

Ying Qin,Gan-Ping Shu,Shenggang Fan,JinYu Lu,Shi Cao,Jian-Hong Han 한국강구조학회 2017 International Journal of Steel Structures Vol.17 No.2

Double skin steel-concrete composite walls have been increasingly used in civil engineering applications. However, the advantages of these walls have not been fully recognized due to the lack of appropriate technical guidelines for capacity design. In this paper, the local buckling strength of steel plate were firstly reviewed in terms of specifications incorporated in several modern codes. A methodology to predict the strength of steel plate with restraint of both concrete and shear studs was proposed based on the explicit solution for local buckling of steel plate in composite shear walls subjected to uniform axial compression and with elastically rotational restraint at loaded and unloaded edges. The results were compared with various previous experimental data and good agreement was observed. Furthermore, the load carrying capacity of composite walls was derived from the superposition of the contribution of steel plate and concrete. The predicted values from the proposed equations, together with the resulted determined from modern codes, were compared with the experimental results. It was found that both the proposed method and JEAG 4618 offer reasonable predictions while AISC 360 and KEPIC-SNG always underestimate the actual values.

Profiling Gene Expression During Gland Morphogenesis of a Glanded and a Glandless Upland Cotton

Ying-Fan Cai,Min Chen,Quan Sun,Yong-Fang Xie,Sheng-Wei Li,Jian-Chuan Mo,Ming-Feng Jiang,You-Lu Yuan,Yu-Zhen Shi,Huai-Zhong Jiang,Zheng Pan,Yun-Ling Gao,Peng-Sheng Ye,Hua-Lan Zeng 한국식물학회 2009 Journal of Plant Biology Vol.52 No.6

The pigment gland is an important character of the Gossypium plant. With the aim of identifying genes involved in pigment gland morphogenesis in cotton, gene expression during pigment gland morphogenesis in Chuan 2802, which is glanded both in seed and plant, and a glandless line N5 was profiled using Affymetrix Cotton microarray. The results showed that there were 564 differentially expressed genes greater than twofold during gland morphogenesis. About 60.2% of these genes shares similarity with known genes on GenBank and about 39.8% with no functional description in the database. These described genes may play roles in defense response, response to oxidative stress, peroxidase activity, and the other metabolic pathways. The KEGG Orthology-Based Annotation System indicated that these above twofold expressed genes involved seven biochemical pathways on KEGG. These findings suggest that a complicated regulation is associated with pigment gland morphogenesis and the associated defense response including gossypol biosynthesis in cotton.

Analysis of Shear Connector of Steel–Concrete Composite Box-Girder Bridge Considering Interfacial Bonding and Friction

Jian-Ping Lin,ZhiBo Wu,Ying Yin,Fan Feng 한국강구조학회 2020 International Journal of Steel Structures Vol.20 No.2

Steel–concrete composite bridges consist of steel and concrete parts which are connected by shear connector such as the widely-used headed stud. Through the chemistry bonding, interface friction and mechanical action the two different materials parts are combined as a composite structure system. Because of the structural mechanism, longitudinal and lateral relative slip and normal separation between the concrete deck and steel girder flange will inevitably exist during the loading process. Further, the complex interface mechanical behavior causes difficulties with nonlinear numerical analysis. Multiple broken lines mode cohesive zone model considering bonding and friction is used in this paper to describe the tangent slip and normal crack of the interface. A zero thickness cohesive element was implemented via the user-defined element subroutine UEL in ABAQUS. Using this method, numerical simulation analysis of a two span composite continuous box-girder was carried out. Results showed load–displacement curves of the structure, relative displacement between the steel girder and the concrete slab interface, interface stress distribution, and internal force of shear studs. Discontinuous deformation numerical simulation has been realized, and effectiveness of the proposed method and accuracy of the program were verified. Although shear stress was assumed to be transmitted by shear connector in the design stage, interface bonding and friction resistance can affect the force state of the shear connector. Results of this study can be used for detailed analysis and evaluation of the composite box-girder bridge without the need to rely on the constitutive laws of shear connectors obtained from push-out tests.

Transcriptome Analysis Reveals Molecular Mechanisms Underlying Methyl Jasmonate-mediated Biosynthesis of Protopanaxadiol-type Saponins in Panax notoginseng Leaves

Li Ying,Lin Yuan,Jia Bing,Chen Geng,Shi Huineng,Xu Rui,Li Xuejiao,Tang Junrong,Tang Qingyan,Zhang Guanghui,Yang Jianli,Fan Wei,Yang Shengchao 한국식물학회 2022 Journal of Plant Biology Vol.65 No.1

Methyl jasmonate (MeJA) has been widely used to improve the biosynthesis of secondary metabolites such as triterpenoid saponins in medicinal plants. However, the underlying molecular mechanisms remain poorly understood. Differing from roots that accumulate protopanaxatriol-type saponins, Panax notoginseng leaves with a lower biomass mainly contain protopanaxadiol (PPD)-type saponins. Therefore, it is interesting to explore whether MeJA can activate the biosynthesis of PPD-type saponins in P. notoginseng leaves. In this study, we found MeJA could effectively induce the accumulation of PPD-type saponins, including ginsenoside Rb1, Rc, Rb2, Rb3 and notoginsenoside Fa, Fe in P. notoginseng leaves based on a newly established high-performance liquid chromatography method. Transcriptome analysis showed that differentially expressed genes (DEGs) induced by MeJA were mainly enriched in “terpenoid backbone biosynthesis”, “biosynthesis of unsaturated fatty acids”, “sesquiterpenoid and triterpenoid biosynthesis”, “fatty acid metabolism”, and “phenylpropanoid biosynthesis”. Furthermore, the expression profile and quantitative real-time PCR analysis of DEGs showed that MeJA could positively induce the molecular response of endogenous jasmonic acid (JA) signaling pathway, and increased PPD-type saponins mediated by MeJA in P. notoginseng leaves may be related to the high expression of FPS, SS, SE, DS and UGTs, and the low expression of CYP716A53v2 and β-AS. The results provide a molecular understanding for MeJA-elicited biosynthesis of triterpenoid saponins and facilitate the further characterization of the genes responsible for biosynthesis of PPD-type saponins in P. notoginseng leaves.

KBTBD7, a novel human BTB-kelch protein, activates transcriptional activities of SRE and AP-1

( Jun Jian Hu ),( Wu Zhou Yuan ),( Ming Tang ),( Yue Qun Wang ),( Xiong Wei Fan ),( Xiao Yang Mo ),( Yong Qing Li ),( Zao Chu Ying ),( Yong Qi Wan ),( Karen Ocorr ),( Rolf Bodmer ),( Yun Deng ),( Xiu 생화학분자생물학회 2010 BMB Reports Vol.43 No.1

Effect of the reaction temperature on nanocrystallites MgAl2O4 spinel ceramic precursor

Rong-tao Wang,Ying Peng,Xiao-wei Fan,Jian-xin Li,Xiao-ping Liang 한양대학교 세라믹연구소 2009 Journal of Ceramic Processing Research Vol.10 No.6

Mg-Al hydrotalcite (Mg6Al2(OH)16CO3·4H2O), the precursor of MgAl2O4 spinel, has been synthesized via a coprecipitation method, using AlCl3·6H2O and MgCl2·6H2O as the raw materials, and NaOH and Na2CO3 as the precipitators. The effect of the reaction temperature, from 50℃ to 90℃, on the Mg-Al hydrotalcite nanocrystallites was analyzed. The nanocrystallites were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). It was confirmed that Mg-Al hydrotalcite nanocrystallites are pure and regularly hexagonal, having a typical hydrotalcite structure. The Mg-Al hydrotalcite crystals grow from about 30 nm to 100 nm with an increase in the reaction temperature from 50℃ to 90 ℃, and the crystal form also tends to perfect and regularly hexagonal. Mg-Al hydrotalcite (Mg6Al2(OH)16CO3·4H2O), the precursor of MgAl2O4 spinel, has been synthesized via a coprecipitation method, using AlCl3·6H2O and MgCl2·6H2O as the raw materials, and NaOH and Na2CO3 as the precipitators. The effect of the reaction temperature, from 50℃ to 90℃, on the Mg-Al hydrotalcite nanocrystallites was analyzed. The nanocrystallites were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). It was confirmed that Mg-Al hydrotalcite nanocrystallites are pure and regularly hexagonal, having a typical hydrotalcite structure. The Mg-Al hydrotalcite crystals grow from about 30 nm to 100 nm with an increase in the reaction temperature from 50℃ to 90 ℃, and the crystal form also tends to perfect and regularly hexagonal.

Surface Treatments : LASER SURFACE MELTING OF Fe - Sb ALLOYS

Jing Guo Zhang,Jian Zhu,Hong Ying Chang,Fan Cheng Kong 대한금속재료학회 ( 구 대한금속학회 ) 1995 Advanced Material and Processing Vol.1 No.-

Manipulation and diagnosis of femtosecond relativistic electron bunch using terahertz-driven resonators

Xu Yang,Song Yifang,Tsai Cheng-Ying,Wang Jian,Liu Zhengzheng,Fan Kuanjun,Yang Jinfeng,Meshkov Oleg 한국원자력학회 2024 Nuclear Engineering and Technology Vol.56 No.10

Using strong electromagnetic fields generated by lasers to interact with electrons for precise diagnosis and manipulation of electron beams represents a recent focal point in accelerator technology. This approach surpasses the limitations of conventional RF technology, such as low electric field gradients and timing jitters, effectively enhancing the accuracy of ultrafast electron beam diagnostics and manipulations. As demands for precision continue to rise, the precise diagnosis of crucial parameters of ultrafast electron beams remains challenging. This study delves into the electromagnetic behavior of THz-driven devices and proposes an alloptical method utilizing single-cycle THz radiation to compress and characterize a 3 MeV electron beam. Particle tracking simulations demonstrate an astonishing compression effect, reducing the bunch length from 54.0 fs to 4.3 fs, and achieving sub-femtosecond bunch length measurement resolution. Moreover, when combined with an orthogonal THz streak camera, this method shows even greater potential in multi-bunch scenarios

A novel method for the synthesis of nano-sized MgAl2O4 spinel ceramic powde

Xiao-ping Liang,Rong-tao Wang,Ying Peng,Xiao-wei Fan,Jian-xin Li 한양대학교 세라믹연구소 2010 Journal of Ceramic Processing Research Vol.11 No.2

This study describes the preparation and characterization of MgAl2O4 spinel ceramic powders by a polyacrylamide gel method with Al(NO3)3·9H2O and Mg(NO3)3·6H2O as the raw materials, acrylamide as the monomer, N,N-mehtylenebisacrylamide as the cross-linking agent, and deionized water as the solvent. The nanopowders were studied by X-ray diffraction (XRD) and a transmission electron microscope (TEM). The results showed that the nanopowders having a typical spinel structure are ultrapure and nano-sized. Due to the hindering effect of the polyacrylamide network, the average grain size of the MgAl2O4spinel is approximately 20 nm. Moreover, it is confirmed that the optimal sintering temperature for synthesizing the MgAl2O4spinel ceramic nanopowders is 900 oC, which is about 600-1000 oC lower than that of the traditional solid-state method.