http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Dongheng Xu,Han Wang,Xuewei Tao,Zhengjun Yao,Shasha Zhang,Moliar Oleksander 대한금속·재료학회 2021 METALS AND MATERIALS International Vol.27 No.5
The Inconel 718 (IN718) alloy coatings were successfully fabricated using electron beam wire-feeding deposition technology.The macrostructure, microstructure and elemental analysis of the deposited coatings were characterized by OM, SEMand EDS. Moreover, the hardness and wear resistance were also investigated experimentally. The results showed that thecross section of the deposited coatings can be divided into three different regions: clad zone (CZ), fusion zone (FZ) and heataffected zone. Equiaxed dendrites appeared in the CZ while columnar dendrites occurred in the FZ, and discrete fine Lavesphase particles were formed under low beam current while continuous coarse Laves phase particles were found under highbeam current. The EDS results showed that the degree of Nb segregation in FZ is higher than that in CZ. More importantly,the microstructure coarsened and the degree of Nb segregation increased with the increase of beam current. The depositedcoating under the lowest beam current (10 mA) has the highest hardness (263 HV0.2) and the minimum specific wear rate(3.95391 × 10−15 m3/Nm), which is corresponding to the fine microstructure, discrete Laves phase particles and low degreeof Nb segregation under low beam current.