주차원단위 산정 모형 개발에 관한 연구 -광주광역시 공동 주택 아파트를 대상으로-

권성대,고동봉,박제진,하태준,Kwon, Sung-Dae,Ko, Dong-Bong,Park, Je-Jin,Ha, Tae-Jun 대한토목학회 2014 대한토목학회논문집 Vol.34 No.2

도시의 급격한 팽창과 함께 주택부족 현상이 나타나게 되자, 정부는 주택부족 문제 해결을 위해 대규모 택지개발을 통하여 주택보급을 확대시켰다. 이러한 현상으로, 공동주택은 우리나라 전체 주택의 83% 수준을 유지하고 있고, 그 중 아파트가 차지하는 비중은 50%로 꾸준한 증가 추세를 보이고 있다. 이로 인해 아파트의 경우 입주민들의 승용차 보유 증가에 따른 아파트 단지 내 주차공간 부족문제 등 제반 주차 관련 문제가 발생하고 있다. 특히, 주차계획대수 수립 시 교통영향평가의 주차수요예측 중 전용면적을 고려한 주차원단위 산정 방법은 기존 계획보다 세대수는 증가하여도 전용면적이 작아지면 계획주차대수는 감소하는 것으로 나타나, 보다 현실적인 주차원단위 산정이 필요한 실정이다. 이에 본 연구는 공공주택 아파트를 대상으로 현실에 적합한 주차원단위를 산정하고자 한다. 현장조사 및 설문조사를 실시하고, 구득자료에 대한 분석을 수행함으로써, 기존 교통영향평가의 주차원단위 산정 문제점을 도출하였다. 또한, 주차수요예측에 영향을 미치는 요인 선정을 통해 주차원단위 산정모형을 개발하였다. 마지막으로 실제 조사된 아파트 주차원단위 자료를 통해 기존 교통영향평가의 주차원단위 산정과 본 연구에서 제시한 주차원단위 산정모형을 비교 분석하였다. 향후 본 연구에서 개발된 주차원단위 산정모형은 주차장법 기준 정립은 물론 보다 현실적인 주차수요예측 수행에 적극 활용될 수 있을 것으로 판단된다. The rapid expansion of cities led to the shortage of housing in urban areas. The government compensated for this shortage through large scale residential developments that increased the housing supply. The supply of condominium apartments remains above 83% of the entire housing supply, and the proportion of apartments are at a steady increase, at about 50%. Due to the increase, illegally parked cars resulting from the shortage of parking spaces within the apartment complex have become increasingly problematic as they block the transit of emergency vehicles, and heighten the tension among neighboring residents in obtaining a parking space. Especially, the future residents are considered to plan the parking based on the estimated demand for parking. However, the parking unit method utilized to estimate the parking demand accounts for the exclusive use of space, which is believed to be far from the parking demands in reality. The reason for this discrepancy is that, as the number of households decrease, and area of exclusive space is expanded, the planned parking increases. On the other hand, when the number of households increase, and the area of exclusive space is reduced, the planned parking decreases, thus methods to recalculate the parking units based on estimated parking demand is an urgent concern. To estimate the parking units based on condominium apartments, this study first examined the existing research literature, and appointed the field of investigation to collect the necessary data. In addition, field study data and surveys collected and analyzed, in order to identify the problems underlying parking units, and problems regarding the current traffic impact assessment parking unit calculation method were deduced. Through identifying the influential factors on parking demand estimates, and performing a factorial analysis based on the collected data, the variables were selected in relation to the parking demand estimates, to develop the parking unit estimate model. Finally, through comparing and verifying the existing traffic impact assessment parking unit estimate against the newly developed model using collected data, a far more realistic parking unite estimate was suggested, reflecting the characteristics of the residents. The parking unit estimate model developed in this study is anticipated to serve as the guidelines for future parking lot legislature, as wel as the basis to provide a more realistic estimate of parking demands based on the resident characteristics of an apartment complex.

NGS_SNPAnalyzer: a desktop software supporting genome projects by identifying and visualizing sequence variations from next-generation sequencing data

Dong‑Jun Lee,Taesoo Kwon,Chang‑Kug Kim,Young‑Joo Seol,Dong‑Suk Park,Tae‑Ho Lee,Byung‑Ohg Ahn 한국유전학회 2020 Genes & Genomics Vol.42 No.11

Background Sequence variations such as single nucleotide polymorphisms are markers for genetic diseases and breeding. Therefore, identifying sequence variations is one of the main objectives of several genome projects. Although most genomeproject consortiums provide standard operation procedures for sequence variation detection methods, there may be differencesin the results because of human selection or error. Objective To standardize the procedure for sequence variation detection and help researchers who are not formally trainedin bioinformatics, we developed the NGS_SNPAnalyzer, a desktop software and fully automated graphical pipeline. Methods The NGS_SNPAnalyzer is implemented using JavaFX (version 1.8); therefore, it is not limited to any operatingsystem (OS). The tools employed in the NGS_SNPAnalyzer were compiled on Microsoft Windows (version 7, 10) andUbuntu Linux (version 16.04, 17.0.4). Results The NGS_SNPAnalyzer not only includes the functionalities for variant calling and annotation but also providesquality control, mapping, and filtering details to support all procedures from next-generation sequencing (NGS) data to variantvisualization. It can be executed using pre-set pipelines and options and customized via user-specified options. Additionally,the NGS_SNPAnalyzer provides a user-friendly graphical interface and can be installed on any OS that supports JAVA. Conclusions Although there are several pipelines and visualization tools available for NGS data analysis, we developedthe NGS_SNPAnalyzer to provide the user with an easy-to-use interface. The benchmark test results indicate that theNGS_SNPAnayzer achieves better performance than other open source tools.

Improvement of interlaminar properties of carbon fiber‑reinforced epoxy composites using aluminum trihydroxide

Dong‑Jun Kwon,Sung‑Min Park,Il‑Jun Kwon,Joung‑Man Park,Euigyung Jeong 한국탄소학회 2019 Carbon Letters Vol.29 No.2

This study provides an economical and effective method to improve the interlaminar properties of carbon fiber-reinforced polymers (CFRPs) using aluminum trihydroxide (ATH) microparticles. ATH microparticles are cheap and are expected to show good affinity to epoxies in the matrix and sizing agents of the carbon fibers owing to the presence of three hydroxyl groups. In addition, ATH particles are reported to improve the mechanical properties of polymers when used as the reinforcement. In this study, ATH microparticles of various sizes, 1.5, 10, and 20 μm, were used to improve the interlaminar properties of the CFRPs. ATH particles with a size of 1.5 μm improved the tensile properties of the ATH/epoxy resin and did not significantly alter the curing behavior. The interfacial adhesion between the carbon fiber and the epoxy resin was also improved, and the impregnation of the resin mixture remained similar to that of the neat resin, resulting in no significant void and defect formation. Considering the above results, the resulting 1.5 μm ATH-reinforced CFRP showed improved interlaminar properties compared to CFRP without ATH. However, 10 and 20 μm ATH-reinforced CFRPs showed deteriorated interlaminar properties due to the diminished tensile properties of the resin itself and resin impregnation, which resulted in more voids and defects, despite the interfacial adhesion between the fiber and the matrix resin.

경희대학교 수원캠퍼스 노천극장 주변 공원 기본계획

김동찬,이윤수,권오원,민창기,김태현,박경모 경희대학교 디자인연구원 2004 예술· 디자인학연구 Vol.7 No.1

We, Kyung-hee University in Suwon has planned to build an open-air theater behind the building of natural science, and feel the need of creating places for cultural life and recreation. As the origin aim of this construction and landscape, university students can use this facilities and place for their daily relaxation and cultivation of emotion, and they also can utilize them for places of their meetings and events. Concerning the following completion of the UN Peace Park, our theater and the surrounding places will expectingly play important roles for the park because the open-air No-cheon theater is included in the full site of the UN Peace park. The focused elements of this basic plan are maintaining the basic plan of the UN Peace Park, forming the visually creative background, of the open-air theater cultural and recreational places, balancing and integrating human, nature, and the useful facilities.

플라즈마 표지소자의 제작

이상윤,라병욱,박동수,황인헌,이덕동,신영남,박성배,이동욱,박용석,박형근,손상호,권태근,채경락,정경득 慶北大學校 自然科學大學 1986 自然科學論文集 Vol.4 No.-

An Ac-type Plasma Display Panel (PDP) operating with Ne-Ar(0.1%) Penning mixture gas is fabicated. The characterics of the panel with electrodes covered with thin and thick dielectric layers are studied. The brightness of the Neon-orange light emitted by the panel measured as function of applied voltage and frequency. As an application, a graphic display system equipped with PDP showing still and moving pictures is made.

인삼고본환과 그 구성약물군의 항산화 효과

뢰영성 ( Yong Sung Loi ),권영모 ( Kwon Yeong Mo ),박종흠 ( Park Jong Heum ),박선동 ( Park Seon Dong ) 대한본초학회 2003 大韓本草學會誌 Vol.18 No.3

N/A objectives: Exposure to oxidant molecules can generate reactive oxigen species(R0S; for example, H₂O₂, O₂-, OH .). These free radicals can alter DNA, proteins and membrane phospholipids. ROS are responsible for aging and many diseases including cancer, neurodegenerative diseases and cardiovascular diseases. Thus, to prevent against celluar damages associated with oxidative stress, antioxidants are important and many research about antioxidants are being conducted over the world. methods: This study was performed to research the antioxidant activities of Insamgobonwhan(IG) and its component groups in vitro, so intended to know the possibility of Insamgobonwhan(1G) as drug which can prevent aging. The experimental group was divided into 4 groups: Imsamgobonwhan(IG), two dong-two jiwhang(IG-1; 麥門冬, 天門冬, 熱地黃, 生地黃), two dong(IG-2; 麥門冬, 天門冬) and two jiwhang(IG-3; 熱地黃, 生地黃). results: 1. All experimental groups had significant antioxidant activity in linoleic acid system on concentration dose--dependently in comparison with control group. But IG and IG-2 have more effect than IG-1 and IG-3 relatively. 2. DPPH radical scavenging experiment and inhibitory effect experiment on superoxide generation in xanthine-xanthine oxidase system showed that all experimental groups had a dose-dependent effect. But IG and IG--1 had more effect than IG-2 and IG-3. 3. Inhibitory effect experiment on superoxide generation induced by xanthine-xanthine oxidase system showed that all experimental groups had a dose-dependent effect. But IG and IG-1 had more effect than IG-2 and IG-3. 4. Inhibitory effect experiment on lipid peroxidation reaction in H₂O₂-Fe²system showed that all experimental groups had a dose--dependent effect. But IG and IG--1 had more effect than IG-2 and IG-3. 5. Experiment on lipid peroxidation removal effect showed that all experimental groups had a dose-dependent effect. But IG and IG-2 have more effect than IG-1 and IG-3. 6. Experiment on glutathion activity effect showed that all experimental groups had some effect. But each groups had no significant difference. 7. Experiment on catalase activity effect showed that all experimental groups had some effect. But each groups had no significant difference. conclusion: These results showed that IG has an antioxidant activity, so it seems to have some anti-aging effect. From comparisons of each experimental groups, IG`s antioxidant effect is likely to be associated with IG-1 mostly.

마이크로 그루브 가공의 특성 평가

권동희,박진효,김정석,김병민,정융호,강명창 한국공작기계학회 2007 한국공작기계학회 추계학술대회논문집 Vol.2007 No.-

As demands for micro parts are on the increase in recent industries such as aerospace, biomedical, electronics, environment, information technology and display, the need for manufacturing such parts is also increasing. Major methods of manufacturing micro parts are based on semiconductor process technology such as lithography and etching and non-traditional machining using lasers, ultrasonic, ion-beams or electrical discharge. However, these methods require lots of time, workpiece materials are limited, and such methods are only applicable to the machining of two-dimensional shapes. Therefore, mechanical machining methods are required for the manufacturing of micro parts with complex shapes. This paper presents an investigation on the characteristics for micro groove machining by using the ultrahigh-speed air turbine spindle, and verifies the properties of mechanical method in fabricating molds for micro barrier ribs. As a result, the optimal machining condition could be found from the investigation of surface roughness according to the kinds of burr shapes in the fabricating of iron mold by using micro endmill.

鐵馬山地域의 Joint 硏究

朴喜斗,권동희,孫龍澤,郭永浩 동국대학교 대학원 1985 大學院硏究論集-東國大學校 大學院 Vol.15 No.-

The purpose of this research is to contribute the data for clarifying the geomorphic characteristics by comparing the joint strikes with stream directions. Joint sets, strikes, and dips are measured in the outcrops by the standards established by K,E, Lowe. The field data are illustrated by the joint map, rose diagrams, point diagram, contour diagram. To know the relation between joint patterns and stream directions Spearman’s r is adapted. The joint patterns in Chulmasan area are concentrated on the tree main strikes that range from N36W to N45W and from N56W to N65W and from N26E to N35E. These strikes represent a master joint set, 33.3% of the total frequency of this area. The stream direction frequency distribution is concentrated to the above ranges and is 40.7% in the above ranges. Spearman’ r is 0.52 and so we have come to concluded that there is amount of corelation between the joint patterns and the stream directions.

CROSS 공법을 이용한 폐수의 생물학적 처리에 관한 연구

박광하,심재도,권영두,강동수,김인호,정태명,황갑성 7개 국립대학교 환경연구 논문집 공동발행 위원회 2003 공업기술연구 Vol.3 No.-

This study aims to develop using a continuous removal of organic and settling solid(CROSS) to increase the efficiency of aeration system for wastewater treatment. To solve many problems of the conventional activated-sludge process, authors suggested a new CROSS model in conjunction with aeration systems in 1996. This system is characterized by utilizing an intensive aeration pipe with inlets at the lower portion and outlets at the higher portion in an aeration tank. Through the experiments on CROSS process, the average removal efficiences of BOD, COD_(Mn), SS, T-N and T-P were showed 98.8%, 93.9%, 98.0%, 71.3% and 49.8%. The average DO (Dissolved-Oxygen) concentration was constantly maintained at 8.0 mg/L by the intensive aeration which was accompanied by rapid reduction of BOD. Degradation of the organic matters in sewage then continued for the whole aeration period. The process demonstrated that it was very adaptive without seeding and returning the sludge. Compared to the activated sludge system, the system was very flexible for the continuous flow treatment. This preliminary assessment showed that the porous media in CROSS reactor is viable for the sewage treatment, since the porous media under the intensive aeration achieves acceptable effluent quality.

수술실 간호사의 간호업무 분석

권성복,조경숙,박영숙,김동옥,이여진,이은희 대한간호행정학회 2008 간호행정학회지 Vol.14 No.1

Purpose: The purpose of this study was to identify nurses' duties and tasks for job analysis of the nurses in the operating room. Methods: This study was descriptive investigation research using the 3-point likert scale questionnaires and the level of importance, difficulty and the frequency of each duty and task were analyzed. Data were collected by 422 OR nurses from 57 hospitals. Results: Job of OR nurses included 13 duties and 105 tasks. The 13 duties were ‘management of operative patient’, ‘assistive work for operation’, ‘supportive work for operation’, ‘infection control in OR’, ‘management of equipments and instruments for operation’, ‘administrating medicine for operation’, ‘supplies management for operation’, ‘safety management for operation’, ‘environmental management for operating room’, ‘administrative work for operation’, ‘education for operating room personnel’, ‘development of operation procedure books’ and ‘self development of OR personnel’. Conclusion: This study identified duties and tasks performed by OR nurses. Based on these results, the importance, frequency, and difficulty in this study will provide research evidence for developing training programs for OR nurses.