http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Experimental modal test of the spiral bevel gear wheel using the PolyMAX method
Tieming Xiang,Diandian Lan,Shaohui Zhang,Wuxiong Li,Daoquan Lin 대한기계학회 2018 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.32 No.1
To verify the effectiveness and correctness of free modal analysis results from a Spiral bevel gear (SBG) wheel by using Finite element method (FEM), an experimental platform was constructed through the free-hanging support of the SBG wheel. The experiment used the hammer knock percussion for excitation and a three-directional acceleration sensor as signal acquisition equipment and utilized the LMS modal analysis module. The geometric model of the SBG wheel was constructed using an eight-node octagon instead of the SBG wheel outer contour. The experiment then extracted the modal parameters of the wheel using the PolyMAX method and obtained the first- and second-order natural frequencies, damping ratios, and mode shapes of the SBG wheel at 0-7 kHz during the experimental modal test. The results of the experimental test were compared with those of the FEM free modal analysis. The first- and second-order natural frequency error rates by FEM were 0.25 % and 0.45 %, respectively. The experimental modal test result verified the rationality of the model by FEM, thus showing that the result of modal analysis by FEM is reliable and providing a basis for the dynamic characteristic analysis of SBG.