Development of Characteristics Measurement System for the Micro-Wall of Flexible Joints

Da Qu,Fei Ding,Jia-Dai Xue,Bo Wang 한국정밀공학회 2017 International Journal of Precision Engineering and Vol.18 No.11

Characteristics of the micro-wall of flexible joints seriously impact the performance of gyro. Hence, measurements of these characteristics become very important. The present study carries out a system to measure the characteristics, including the stiffness and thickness, of the micro-wall of flexible joints. The force sensor deemed as a core component is mainly expounded in the paper. It is developed based on the principle of resistance strain gauge and good performance is shown on measuring the stiffness and the thickness. The measurement accuracy is calculated though repeated experiments and measurement theory and results are elaborated. The measurement results help to reveal the rule of structural design so as to enhance the performance of gyro. Finally, some improvements of this measurement system are proposed for further applications.

논문 : 有元一代的解州鹽業

구대풍 ( Da Feng Qu ) 경북사학회 2004 복현사림 Vol.27 No.-

Genetic Variants at 6p21.1 and 7p15.3 Identified by GWASs of Multiple Cancers and Ovarian Cancer Risk: a Case-control Study in Han Chinese Women

Li, Da-Ke,Han, Jing,Liu, Ji-Bin,Jin, Guang-Fu,Qu, Jun-Wei,Zhu, Meng,Wang, Yan-Ru,Jiang, Jie,Ma, Hong-Xia Asian Pacific Journal of Cancer Prevention 2014 Asian Pacific journal of cancer prevention Vol.15 No.1

A recent study summarized several published genome-wide association studies (GWASs) of cancer and reported two pleiotropic loci at 6p21.1 and 7p15.3 contributing to multiple cancers including lung cancer, noncardia gastric cancer (NCGC), and esophageal squamous-cell carcinoma (ESCC) in Han Chinese. However, it is not known whether such genetic variants have similar effects on the risk of gynecologic cancers, such as ovarian cancer. Hence, we explored associations between genetic variants in 6p21.1 and 7p15.3 and ovarian cancer risk in Han Chinese women. We performed an independent case-control study by genotyping the two loci (rs2494938 A > G at 6p21.1 and rs2285947 A > G at 7p15.3) in a total of 377 ovarian cancer cases and 1,034 cancer-free controls using TaqMan allelic discrimination assay. We found that rs2285947 at 7p15.3 was significantly associated with risk of ovarian cancer with per allele odds ratio (OR) of 1.33 [95% confidence interval (CI): 1.08-1.64, P=0.008]. However, no significant association was observed between rs2494938 and ovarian cancer risk. Our results showed that rs2285947 at 7p15.3 may also contribute to the development of ovarian cancer in Han Chinese women, further suggesting pleiotropy of 7p15.3 in multiple cancers.

Antecedents of self-reported safety behaviors among commissioning workers in nuclear power plants: The roles of demographics, personality traits and safety attitudes

Tao, Da,Liu, Zhaopeng,Diao, Xiaofeng,Tan, Haibo,Qu, Xingda,Zhang, Tingru Korean Nuclear Society 2021 Nuclear Engineering and Technology Vol.53 No.5

Demographics, personality traits and attitudes are related to safety behaviors in varied workplaces, but their roles in nuclear power plants (NPPs) have not been fully understood. This study was conducted to explore the roles of a set of demographic, personality and attitudinal factors on self-reported safety behaviors (including safety participation and human errors) among NPP commissioning workers. Survey data were collected from 157 Chinese commissioning workers. Results showed that age and work experience were significantly associated with human errors, but not with safety participation. Neuroticism and conscientiousness were significantly related to human errors, while neuroticism, conscientiousness and agreeableness were significantly related to safety participation. Attitude towards questioning was observed as an antecedent of safety participation, and functioned as a mediating variable in the relation between conscientiousness and safety behaviors. The findings provide evidence-based implications on the design of diverse interventions and strategies for the promotion of safety behaviors in NPPs.

A Parallel Method of Deep Packet Inspection based on Message-Passing Interface

Jia-xing Qu,Guo-yin Zhang,Xi-zhong Wang,Jia-hui Liu,Da-hua Song 보안공학연구지원센터 2015 International Journal of Security and Its Applicat Vol.9 No.12

With the increasing number of cores in multicore processors, it is challenging task how to take advantage of powerful parallel computing for the deep packet inspection. This paper introduces the deep packet inspection with a parallel method which exploits the message-passing interface (MPI). The parallel procedure includes the master thread and the slave thread. The master assigns the data packet to the slave. The slave executes the string matching with rules for inspecting. Both the master and the slave communicate by using MPI functions. The experimental results show that the parallel method is suitable for the trend of the increasing number of cores in multicore processors. Moreover, when the number of threads is equal to the number of cores in multicore processors, the performance arrives at the maximum throughput.

Co3(PO4)2-Coated LiV3O8 as Positive Materials for Rechargeable Lithium Batteries

Ling-Ling Xie,Li-Qin You,Xiao-Yu Cao,Chao-Feng Zhang,Da-Wei Song,Ling-Bo Qu 대한금속·재료학회 2012 ELECTRONIC MATERIALS LETTERS Vol.8 No.4

Co3(PO4)2-coated LiV3O8 has been successfully synthesized and used as positive material for rechargeable lithium batteries by a facile liquid phase method. The as-prepared powders were characterized by x-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), and the galvanostatic discharge/charge experiments. As-prepared Co3(PO4)2-coated LiV3O8 forms a good layered structure with a poor cyrstallinity. SEM reveals that Co3(PO4)2-coated LiV3O8 has uniform particle distribution and reduced particle size when compared with bare one. The Co3(PO4)2 coating layer is about 33 - 59 nm forming a continuous lumps attached to LiV3O8 particle surface. Co3(PO4)2-coated LiV3O8 electrode shows increased capacity and more stable cycling. The first and 35th discharge capacities of the Co3(PO4)2-coated LiV3O8electrode are 322.8 mAh g−1 and 235.7 mAh g−1 in the range of 4.0 - 1.8 V at a current rate of 30 mA g−1, respectively. The improved electrochemical performance is assigned to the greatly reduced LiV3O8 particle with uniform morphology. Co3(PO4)2-coating further benefits the phase transitions of LiV3O8 during discharge/charge while preventing parasite reactions between electrode surface and electrolyte.

Highly Oriented Monolayer Graphene Grown on a Cu/Ni(111) Alloy Foil

Huang, Ming,Biswal, Mandakini,Park, Hyo Ju,Jin, Sunghwan,Qu, Deshun,Hong, Seokmo,Zhu, Zhili,Qiu, Lu,Luo, Da,Liu, Xiaochi,Yang, Zheng,Liu, Zhongliu,Huang, Yuan,Lim, Hyunseob,Yoo, Won Jong,Ding, Feng,Wa American Chemical Society 2018 ACS NANO Vol.12 No.6

<P>Fast-growth of single crystal monolayer graphene by CVD using methane and hydrogen has been achieved on “homemade” single crystal Cu/Ni(111) alloy foils over large area. Full coverage was achieved in 5 min or less for a particular range of composition (1.3 at.% to 8.6 at.% Ni), as compared to 60 min for a pure Cu(111) foil under identical growth conditions. These are the bulk atomic percentages of Ni, as a superstructure at the surface of these foils with stoichiometry Cu<SUB>6</SUB>Ni<SUB>1</SUB> (for 1.3 to 7.8 bulk at.% Ni in the Cu/Ni(111) foil) was discovered by low energy electron diffraction (LEED). Complete large area monolayer graphene films are either single crystal or close to single crystal, and include folded regions that are essentially parallel and that were likely wrinkles that “fell over” to bind to the surface; these folds are separated by large, wrinkle-free regions. The folds occur due to the buildup of interfacial compressive stress (and its release) during cooling of the foils from 1075 °C to room temperature. The fold heights measured by atomic force microscopy (AFM) and scanning tunneling microscopy (STM) prove them to all be 3 layers thick, and scanning electron microscopy (SEM) imaging shows them to be around 10 to 300 nm wide and separated by roughly 20 μm. These folds are always essentially perpendicular to the steps in this Cu/Ni(111) substrate. Joining of well-aligned graphene islands (in growths that were terminated prior to full film coverage) was investigated with high magnification SEM and aberration-corrected high-resolution transmission electron microscopy (TEM) as well as AFM, STM, and optical microscopy. These methods show that many of the “join regions” have folds, and these arise from interfacial adhesion mechanics (they are due to the buildup of compressive stress during cool-down, but these folds are different than for the continuous graphene films-they occur due to “weak links” in terms of the interface mechanics). Such Cu/Ni(111) alloy foils are promising substrates for the large-scale synthesis of single-crystal graphene film.</P> [FIG OMISSION]</BR>

Comparison of Liver Transplantation and Liver Resection for Hepatocellular Carcinoma Patients with Portal Vein Tumor Thrombus Type I and Type II

Jia-Yu Lv,Ning-Ning Zhang,Ya-Wei Du,Ying Wu,Tian-Qiang Song,Ya-Min Zhang,Yan Qu,Yu-Xin Liu,Jie Gu,Ze-Yu Wang,Yi-Bo Qiu,Bing Yang,Da-Zhi Tian,Qing-Jun Guo,Li Zhang,Ji-San Sun,Yan Xie,Zheng-Lu Wang,Xin 연세대학교의과대학 2021 Yonsei medical journal Vol.62 No.1

Purpose: The aim of this study was to compare the efficacy of liver transplantation (LT) and liver resection (LR) for hepatocellularcarcinoma (HCC) patients with portal vein tumor thrombus (PVTT) and to investigate risk factors affecting prognosis. Materials and Methods: A total of 94 HCC patients with PVTT type I (segmental PVTT) and PVTT type II (lobar PVTT) were involvedand divided into LR (n=47) and LT groups (n=47). Recurrence-free survival (RFS) and overall survival (OS) were comparedbefore and after inverse probability of treatment weighting (IPTW). Prognostic factors for RFS and OS were explored. Results: Two treatment groups were well-balanced using IPTW. In the entire cohort, LT provided a better prognosis than LR. Among patients with PVTT type I, RFS was better with LT (p=0.039); OS was not different significantly between LT and LR(p=0.093). In subgroup analysis of PVTT type I patients with α-fetoprotein (AFP) levels >200 ng/mL, LT elicited significantly longermedian RFS (18.0 months vs. 2.1 months, p=0.022) and relatively longer median OS time (23.6 months vs. 9.8 months, p=0.065). Among patients with PVTT type II, no significant differences in RFS and OS were found between LT and LR (p=0.115 and 0.335,respectively). Multivariate analyses showed treatment allocation (LR), tumor size (>5 cm), AFP and aspartate aminotransferase(AST) levels to be risk factors of RFS and treatment allocation (LR), AFP and AST as risk factors for OS. Conclusion: LT appeared to afford a better prognosis for HCC with PVTT type I than LR, especially in patients with AFP levels>200 ng/mL.