http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
계단형 텅스텐 결정면의 질소 흡착에 관한 연구 : Ⅱ. W(210) 및 W(310)면
최대선(D. S. Choi),한종훈(J. H. Han),백선목(S. M. Paik),박노길(N. G. Park),김욕욱(Y. W. Kim),황정남(C. N. Whang) 한국진공학회(ASCT) 1996 Applied Science and Convergence Technology Vol.5 No.4
장전자 방출법으로 텡스텐 (210)면 및 (310)면(100)면의 질소 흡착에 의한 일함수의 변화에 heat of desorption을 측정하였으며 Thermal Desortion Spectra(TDS) 결과로부터 adsorption site를 예측하였다. 텅스텐 (210)면 및 (310)면에 에 질소가 흡착될 때 흡착율에 따라 일함수는 증가하다가 각 면에 대하여 흡착율 5 Langmuir일때 최대 변화량 0.29 eV및 0.20 eV에서 포화되었다. TDS 결과는 이 면들은 낮은 dose의 영역에서 각각 3개의 흡착 site가 있음을 보였으며 이 흡착 site들 중 α₁state의 spectrum의 강도는 (210)면에서 보다 (310)면에서 상대적으로 강해짐을 보였다. 또한 (210)와 (310)면의 α₁ 과 β₂ state의 흡착 site에 흡착된 질소의 dipole moment의 방향은 이 흡착 site들에 대응되는 (100)면의 α₁ 과 β₂state의 흡착 site에 흡착된 질소의 dipole moment의 방향과 반대 방향으로 측정되었으며 이 현상으로부터 질소의 상대적인 흡착 위치를 예측하였다. The heat of desorption and the work function change induced by nitrogen adsorption on the stepped tungstein surface planes, W(210) and W(310), are measured using the Field Electron Emission Microscope(FEM). The adsoption sites are predicted from the Thermal Desortion Spectra(TDS). The work function change of both W(210) and W(310) planes increase as increasing the nitrogen dose and saturates at the nitrogen dose about 5 Langmuir to 0.29 eV and 0.20 ev respectively. We find three adsorption site on each plane for the low dose range. The TDS result shows that the intensity of α₁, state on W(310) is much stronger than that of α₁ state on W(210), and the direction of nitrogen dipole moment adsorbed on the sites correspond to α₁, and β₂ states on W(210) and W(310) planes are in the opposite direction to that of the equivalent states on W(100) plane. From this observation we can predict the relative atomic position in the zdirection (perpendicular direction to the surface) of nitrogen molecules/atoms adsorbed on these sites.
파력발전장치의 WECAN Level 1 통합성능해석 프로그램 개발
하윤진(Y.J Ha),박지용(J.Y Park),김경환(K.H Kim),박세완(S.W Park),김길원(K.W Kim),김정석(J.S Kim),이정희(J.H Lee),오재원(J.W Oh),노찬(R. Chan),최장영(J.Y Choi),장강현(G.H Jang),천호정(H.J Cheon),김재환(J.H Kim) 한국신재생에너지학회 2021 한국신재생에너지학회 학술대회논문집 Vol.2021 No.7
본 연구에서는 진동수주형과 가동물체형 파력발전장치에 대하여 통합성능해석을 위한 WECAN Level 1 프로그램 개발하였다. 본 프로그램은 파력발전장치 설계 시 그 설계된 파력발전장치의 연간발전량을 해석할 수 있는 프로그램이며, 각 에너지변환단계를 통합하여 해석할 수 있고 연간발전량을 수십초 내에 해석할 수 있는 프로그램이다. 본 프로그램과 유사한 프로그램으로는 NREL에서 개발한 WEC-Sim, DNV-GL에서 개발한 WaveDyn이라는 프로그램이 있으며, 이 중 WEC-Sim은 매트랩 코드 기반으로 공개되어 있고 범용적인 활용이 가능하도록 구성되어 있다. 다만 본 프로그램의 경우에는 2차 및 3차 에너지변환 단계에서 단순히 효율만을 고려하고 있으며 1차 에너지변환 단계의 경우 진동 수주형 파력발전장치를 제외한 가동물체형 파력발전장치만을 해석할 수 있도록 구성되어 있다. 따라서 WECAN Level 1 프로그램은 이러한 한계를 극복하고자 개발되었으며, 상대적으로 다양한 파력발전장치 종류를 해석할 수 있도록 확장하고자 하였다. 본 연구에서는 기존의 파력발전장치 통합성능해석 프로그램과 비교하여 자단점을 분석하고 향후 개발방향을 소개하고자 하며, 이를 통하여 국내 파력발전장치의 성능평가 및 설계기술을 고도화하고 파력발전장치의 상용화를 선도하고자 한다.
파력발전 통합성능평가를 위한 WECAN 프로그램 개발방향 고찰
박지용(J.Y. Park),김경환(K.H. Kim),하윤진(Y.J. Ha),박세완(S.W. Park),김길원(K.W. Kim),김정석(J.S. Kim),이정희(J.H. Lee),오재원(J.W. Oh),노찬(C. Roh),최장영(J.Y. Choi),장강현(G.H. Jang),천호정(H.J. Cheon),김재환(J.H. Kim) 한국해양환경·에너지학회 2020 한국해양환경·에너지학회 학술대회논문집 Vol.2020 No.7
본 연구에서는 대표적인 파력발전장치 형태인 진동수주형과 가동물체형 파력발전장치를 대상으로 파력발전 통합성능 평가를 위한 WECAN프로그램 개발에 관한 연구를 수행하였다. 파력발전장치 개발을 위해 각 설치환경을 고려하여 적절한 설계를 진행하고 해당 설계안에 대해 발전성능과 안전성을 평가하게 되는데, 기존 연구에서 각 에너지변환단계를 서로 구분하여 해석함으로써 해당 시뮬레이션 결과가 에너지변환단계가 종합하여 연동된 실험 및 실증시험 결과와 차이를 보여 왔다. 따라서 이러한 문제점을 극복하기 위해 파력발전장치를 시스템기술로 접근하여 각 에너지변환단계를 통합하여 해석하고, 최적설계와 최적제어방안 도출을 위해 WECAN(Wave Energy Converter ANalysis) 프로그램을 개발하려 한다. 본 연구를 통해 WECAN 프로그램 개발을 위한 각 에너지변환단계별 해석기술과 단계별 개발방향을 설명하며, 적용 범위와 구현방안에 대해 언급하였다. 해당 프로그램의 연구개발 이후 단계별로 WECAN-DO, WEC-HILS 등의 프로그램을 개발할 예정이며, 이를 통해 국내 파력발전장치 성능평가 및 설계기술을 한 단계 끌어올리고, 앞선 기술을 통해 파력발전장치의 상용화를 선도하려 한다. In this study, we conducted a study on the development of the WECAN program for the integrated performance analysis of wave energy converter for both the oscillating water column type and activated-body type. The design of wave energy converters is conducted considering each installation environment and then, the power generation performance and safety analysis for the design are evaluated. In this process, existing studies have been analyzed by classifying each energy conversion step by step, and have shown differences from experimental and open sea test results. Therefore, in order to overcome this problem, we are developing a WECAN (Wave Energy Converter ANalysis) program by conducting integrated performance analysis approaching the wave energy converter as a system technology and we will derive an optimal design and an optimal control plan for the wave energy converter. In this study, the analysis technology for each energy conversion step and the development direction for each step are described for the WECAN program, and the application scope and implementation plan are mentioned. We also plan to develop WECAN-DO, WEC-HILS and other programs step by step after the R&D of this program. As a result, the performance evaluation and design technology of the domestic wave energy converter will be taken to the next level, and the commercialization of the wave energy converter will be led by these leading technologies.