PLCE1 Gene in Esophageal Cancer and Interaction with Environmental Factors

Guo, Li-Yan,Zhang, Shen,Suo, Zhen,Yang, Chang-Shuang,Zhao, Xia,Zhang, Guo-An,Hu, Die,Ji, Xing-Zhao,Zhai, Min Asian Pacific Journal of Cancer Prevention 2015 Asian Pacific journal of cancer prevention Vol.16 No.7

Objective: To study the PLCE1 gene rs2274223 polymorphism with regard to esophageal cancer and its interaction with diet, lifestyle, psychological and environmental factors in Southwest Shandong province. Materials and Methods: A case series study (case-case) was conducted. Questionnaire data were collected and 3 ml-5ml venous blood was drawn for DNA extraction among the qualified research subjects. PLCE1 gene polymorphism was detected after PCR amplification of DNA. SPSS 13.0 software was used for statistical analysis of the data. Results: The three genotypes A/A, A/G and G/G PLCE1 gene rs2274223 was 31, 16 and 4 cases, accounting for 60.8%, 31.4%, 0.08% respectively. The difference of three genotypes (AA/GA/GG) proportion between negative and positive family history of patients was statistically significant, ${\chi}^2=6.213$, p=0.045. There was no statistically significant relationship between PLCE1 gene rs2274223 polymorphism and smoking, drinking, ${\chi}^2=0.119$, p=0.998, and ${\chi}^2=1.727$, p=0.786. There was no linkage of the three rs2274223 PLCE1 gene genotypes (AA/GA/GG) proportion with eating fried, pickled, hot, mildew, overnight, smoked, excitant food, eat speed, salt taste or not (p>0.05). or with living environment pollution and nine risk factors of occupational exposure (p>0.05). There was no statistically significant difference in TS scores between different genotype of rs2274223 PLCE1 gene. Conclusions: The PLCE1 rs2274223 polymorphism has a relationship with family history of esophageal cancer, but does not have any significant association with age, gender, smoking, alcohol drinking, food hygiene, eating habits, living around the environment and occupation in cases.

5-Aza-2'-deoxycytidine Induces Hepatoma Cell Apoptosis via Enhancing Methionine Adenosyltransferase 1A Expression and Inducing S-Adenosylmethionine Production

Liu, Wei-Jun,Ren, Jian-Guo,Li, Ting,Yu, Guo-Zheng,Zhang, Jin,Li, Chang-Sheng,Liu, Zhi-Su,Liu, Quan-Yan Asian Pacific Journal of Cancer Prevention 2013 Asian Pacific journal of cancer prevention Vol.14 No.11

In hepatocellular cancer (HCC), lack of response to chemotherapy and radiation treatment can be caused by a loss of epigenetic modifications of cancer cells. Methionine adenosyltransferase 1A is inactivated in HCC and may be stimulated by an epigenetic change involving promoter hypermethylation. Therefore, drugs releasing epigenetic repression have been proposed to reverse this process. We studied the effect of the demethylating reagent 5-aza-2'-deoxycitidine (5-Aza-CdR) on MAT1A gene expression, DNA methylation and S-adenosylmethionine (SAMe) production in the HCC cell line Huh7. We found that MAT1A mRNA and protein expression were activated in Huh7 cells with the treatment of 5-Aza-CdR; the status of promoter hypermethylation was reversed. At the same time, MAT2A mRNA and protein expression was significantly reduced in Huh7 cells treated with 5-Aza-CdR, while SAMe production was significantly induced. However, 5-Aza-CdR showed no effects on MAT2A methylation. Furthermore, 5-Aza-CdR inhibited the growth of Huh7 cells and induced apoptosis and through down-regulation of Bcl-2, up-regulation of Bax and caspase-3. Our observations suggest that 5-Aza-CdR exerts its anti-tumor effects in Huh7 cells through an epigenetic change involving increased expression of the methionine adenosyltransferase 1A gene and induction of S-adenosylmethionine production.

Research on bearing characteristics of socket-spigot template supporting system

Chang-Ming Hu,Yan Guo,Ming Lian 국제구조공학회 2016 Steel and Composite Structures, An International J Vol.20 No.4

The socket-spigot template supporting system is widely used in engineering applications in China. As a newer type of support structure, there has been growing research interest in its bearing capacity. In this paper, four vertical bearing capacity tests were carried out on the basic mechanical unit frame of a socket-spigot template supporting system. The first goal was to explore the influence of the node semi-rigid degree and the longitudinal spacing of the upright tube on the vertical bearing capacity. The second objective was to analyze the displacement trend and the failure mode during the loading process. This paper presents numerical analysis of the vertical bearing capacity of the unit frames using the finite element software ANSYS. It revealed the relationship between the node semi-rigid degree and the vertical bearing capacity, that the two-linear reinforcement model of elastic-plastic material can be used to analyze the socket-spigot template supporting system, and, through node entity model analysis, that the load transfer direction greatly influences the node bearing area. Finally, this paper indicates the results of on-site application performance experiments, shows that the supporting system has adequate bearing capacity and stability, and comments on the common work performance of a socket and fastener scaffold.

Excess properties and viscous flow thermodynamics of the binary system 2-ethanediamine+triethylene glycol at T=(298.15, 303.15, 308.15, and 313.15) K for CO2 capture

Yan Chang,Jianbin Zhang,Qiang Li,Lihua Li,Bo Guo,Tianxiang Zhao 한국화학공학회 2014 Korean Journal of Chemical Engineering Vol.31 No.12

Liquid densities and viscosities are reported for the binary system of 1,2-ethanediamine (EDA)+triethyleneglycol (TEG) at T=(298.15, 303.15, 308.15, and 313.15) K. Densities were measured using a capillary pycnometerand viscosities were determined using an Ubbelohde capillary viscometer. The experimental results are compared withdata published in the literatures. Based on the density data and kinematic viscosity data, excess molar volumes (VmE)and deviation in kinematic viscosity (Δν) were calculated and the calculated results were fitted to a Redlich-Kister equa-tion to obtain the coefficients and estimate the standard deviations between the experimental and calculated quantities. The values of VmEare negative in the whole composition range, whereas the values of Δν are positive over the majorcomposition range. From kinematic viscosity data, Gibbs energies of activation of viscous flow (ΔG*), enthalpy of ac-tivation for viscous flow (ΔH*), and entropy of activation for the viscous flow (ΔS*) were also calculated.

Changes in fermentation pattern and quality of Italian ryegrass (Lolium multiflorum Lam.) silage by wilting and inoculant treatments

Liu, Chang,Zhao, Guo Qiang,Wei, Sheng Nan,Kim, Hak Jin,Li, Yan Fen,Kim, Jong Geun Asian Australasian Association of Animal Productio 2021 Animal Bioscience Vol.34 No.1

Objective: This study was conducted to investigate the effects of wilting and microbial inoculant treatment on the fermentation pattern and quality of Italian ryegrass silage. Methods: Italian ryegrass was harvested at heading stage and ensiled into vinyl bags (20 cm×30 cm) for 60d. Italian ryegrass was ensiled with 4 treatments (NWNA, no-wilting noadditive; NWA, no-wilting with additive; WNA, wilting no-additive; WA, wilting with additive) in 3 replications, wilting time was 5 hours and additives were treated with 106 cfu/g of Lactobacillus plantarum. The silages samples were collected at 1, 2, 3, 5, 10, 20, 30, 45, and 60 days after ensiling and analyzed for the ensiling quality and characteristics of fermentation patterns. Results: Wilting treatment resulted in lower crude protein and in vitro dry matter digestibility and there were no significant differences in acid detergent fiber (ADF), total digestible nutrient (TDN), water-soluble carbohydrate (WSC), ammonia content, and pH (p>0.05). However, wilting treatment resulted in higher ADF and neutral detergent fiber content of Italian ryegrass silage (p<0.05), and the WNA treatment showed the lowest TDN and in vitro dry matter digestibility. The pH of the silage was higher in the wilting group (WNA and WA) and lower in the additive treatment group. Meanwhile, the decrease in pH occurred sharply between the 3-5th day of storage. The ammonia nitrogen content was significantly lower in the additive treatment (p<0.05), and wilting had no effect. As fermentation progressed, the lactic and acetic acid contents were increased and showed the highest content at 30 days of storage. Conclusion: The wilting treatment did not significantly improve the silage fermentation, but the inoculant treatment improved the fermentation patterns and quality of the silage. So, inoculation before ensiling is recommended when preparing high quality of Italian ryegrass silage, and when wilting, it is recommended to combine inoculation for making high quality silage.

Modulation of lung cancer growth arrest and apoptosis by Phellinus Linteus

Guo, Jinjin,Zhu, Tongbo,Collins, LeaAnn,Xiao, Zhi-Xiong J.,Kim, Sung-Hoon,Chen, Chang-Yan Alan R. Liss, Inc 2007 Molecular carcinogenesis Vol.46 No.2

<P>The Phellinus Linteus (PL) mushroom has been shown to possess anti-tumor properties. Through influencing lymphocytes, PL indirectly augments the host's immune system against cancer cells. PL has also been demonstrated to reduce tumor proliferation. However, the mechanisms of PL against malignant growth have not yet been fully explored. In this study, we report that PL mediates the following two activities in mouse and human lung cancer cells: cell-cycle arrest at a low concentration of PL and apoptosis in response to a high dose of PL. After exposure to a low dose of PL, G<SUB>1</SUB> growth arrest occurred in the lung cancer cells. The negative growth control mediated by PL is evidenced by the decrease of the activities of cyclin-dependent kinases CDK2, 4, and 6. In contrast, at high doses, PL-induced lung cancer cells to undergo apoptosis in a dose-dependent fashion. This was evidenced by DNA fragmentation, caspase activation, and loss of clonogenecity in the lung cancer cells, all of which were lacking in the lung cancer cells treated with low concentrations of PL as well as the normal mouse lung epithelial cells exposed to either low or high concentrations of PL. The addition of the caspase inhibitor Z-VADfmk completely suppressed PL-induced apoptosis. Furthermore, the low dose of PL was able to synergize with doxorubicin to induce apoptosis in the lung cancer cells. Thus, our findings suggest that PL regulates two responses in the lung cancer cells: cell-cycle arrest and apoptosis. © 2006 Wiley-Liss, Inc.</P>

A new recombined porcine reproductive and respiratory syndrome virus virulent strain in China

Jian-guo Dong,Lin-yang Yu,Pei-pei Wang,Le-yi Zhang,Yan-ling Liu,Peng-shuai Liang,Chang-xu Song 대한수의학회 2018 Journal of Veterinary Science Vol.19 No.1

Porcine reproductive and respiratory syndrome (PRRS) is one of the most important swine diseases worldwide. In the present study, a new virulent strain of PRRS virus (PRRSV), GDsg, was isolated in Guangdong province, China, and caused high fever, high morbidity, and high mortality in sows and piglets. The genome of this new strain was 15,413 nucleotides (nt) long, and comparative analysis revealed that GDsg shared 82.4% to 94% identity with type 2 PRRSV strains, but only 61.5% identity with type 1 PRRSV Lelystad virus strain. Phylogenetic analysis indicated that type 2 PRRSV isolates include five subgenotypes (I, II, III, IV, and V), which are represented by NADC30, VR-2332, GM2, CH-1a, and HuN4, respectively. Moreover, GDsg belongs to a newly emerging type 2 PRRSV subgenotype III. More interestingly, the newly isolated GDsg strain has multiple discontinuous nt deletions, 131 (19 + 18 + 94) at position 1404–1540 and a 107 nt insertion in the NSP2 region. Most importantly, the GDsg strain was identified as a virus recombined between low pathogenic field strain QYYZ and vaccine strain JXA1-P80. In conclusion, a new independent subgenotype and recombinant PRRSV strain has emerged in China and could be a new threat to the swine industry of China.

Primary study on the germ plasm diversity of Agaraicus blazei

Qian Guo,Yin-Jie Pan,Chang-Yan Zhou,Chun-Yan Song 한국버섯학회 2004 한국버섯학회 국제학술대회 Vol.3 No.-

Simultaneous distillation-extraction for manufacturing ultra-high-purity electronic-grade octamethylcyclotetrasiloxane (D4)

Wenhui Guo,Shuhu Guo,Xu Zhao,Zhenjun Yuan,Yu Zhao,Xin Chang,Hong Li,Xiong Zhao,Ye Wan,Dazhou Yan,Zhongyuan Ren,Xiaolei Fan,Xin Gao 한국공업화학회 2022 Journal of Industrial and Engineering Chemistry Vol.109 No.-

Ultra-high-purity (UHP) electronic-grade octamethylcyclotetrasiloxane (D4) is the key precursor of lowdielectricconstant (low-k) SiCOH films to manufacture integrated circuits (IC), meeting the stringentrequirements of the rapidly developing semiconductor industry. Commonly, metallic impurities in D4were removed by multiple unit operations of adsorption, filtration, and distillation, which could reducethe concentration of a single metallic impurity below 1 ppb. However, D4 with higher purity is requiredby semiconductor production due to an increase in transistor density. Herein, a novel method based onthe integrated simultaneous distillation–extraction (SDE) was developed for manufacturing UHPelectronic-grade D4. The lab and pilot scale experiments showed that the purity of water and D4 has apositive correlation. Based on the experimental data, a double-column process, consisting of azeotropic/extractive distillation column and precision distillation column with UNIQUAC method, was establishedto access the feasibility of scaling up the SDE process. According to the simulation results, D4with the purity > 99.999 wt.% and total metallic impurities (TMI) content below 1 ppb could be obtainedusing ultra-pure water.

Fabrication of a Pb-Sn Nanowire Array Gas Sensor Using a Novel High Vacuum Die Casting Technique

Chin-Guo Kuo,Ho Chang,Lih-Ren Hwang,Shu Hor,Jia-Shin Chen,Guo-yan Liu,Sheng-Cheng Cheng 대한금속·재료학회 2013 ELECTRONIC MATERIALS LETTERS Vol.9 No.4

In this study, an anodic aluminum oxide nanomold was obtained by etching on an aluminum substrate at a purity of 99.7% with an oxalic acid electrolyte. After etching, a nanomold was prepared with pores that were measured at 80 nm in diameter. This nanomold was used as a base. Using the vacuum casting method,the Pb-Sn alloy was die-cast into the nanomold and consequently shaped into a Pb-Sn alloy nanowire of 80 nm in diameter and 50 μm in length. After solidification, a Pb-Sn nanowire array was obtained. The array of Pb-Sn nanowires prepared in this study can be applied to a gas sensor. Microstructural analysis of the AAO nanomold and the Pb-Sn nanowire array are performed by SEM and XRD.