학교 경제교육 방향 탐색을 위한 델파이 조사 연구

최병모,김정호,이준혁 한국경제교육학회 2005 경제교육연구 Vol.12 No.1

하폐수중의 아닐린의 생물학적 분해를 위한 Pseudomonas속 균주 MIDR-79의 분리 및 특성

이재완,이동희,방병호 한국상하수도학회 1989 한국상하수도학회지 Vol.2 No.1

A bacterium, MIDR-79. was isolated from river bed which utilizes aniline as sole source of carbon and nitrogen. It was identified as Pseudomonas species. Optimal temperature and pH for the biodegradation of aniline was 30℃ and pH6~8, respectively. The microorganism grew well and degraded aniline completely in the range of 10 to 35mM of aniline, but substrate inhibition was observed at the concentration of 40mM aniline. The enzyme system involved in aniline biodegradation was repressed by the readily utilizable carbohydrates and nitrite. Ammonia was released from aniline with resting cells and accumulated in the reaction mixtue. And aromatic compounds besides aniline such as phenol, catechol and resorcinol were assimilated by the microorganism.

금속면의 표면처리 방법에 따른 금합금과 전장레진간의 전단결합강도에 관한 연구

박동원,임호남,우이형,최부병 慶熙大學校 齒科大學 1994 慶熙齒大論文集 Vol.16 No.1

The effect of five different surface treatments on the shear bond strength of the resin bond to Type IV Gold alloy was studied by bonding resin to metal. The metal surface was subjected to one of the following treatments and bonded ; (1) air abraded with 50?m alumina particles, (2) beads (3) beads and tin-plated at current density of 300mA/cm2, (4) tin-plated at current density of 300mA1cm (5)silicacoating with Sililink, and bonded with an MDP Opaque primer, CESEAD resin system. The bonded specimens were immersed in water for 23 hours after 1 hour resin curing and shear bond strength were recorded On the basis of this study, the following conclusions can be drawn; 1. Difference were found in the shear bond strength among all experimental groups. and bead group exihibited the highest shear bond strength and sand blasting group exhibited the lowest shear bond strength on five groups. 2. Bead group, mechanical bonding was significantly higher than that obtained with the samples, tinplating, silicacoating, and chemical bonding. 3. No statistically significant difference was found between the shear bond strengths obtained with bead and bead tinplating, and between tinplating and silicacoating.

복합레진의 중합 수축력과 수복물의 결합양상에 관한 연구 제 2 편 결합강도

박남수,우이형,최부병,임호남,최대균 大韓齒科器材學會 1993 대한치과재료학회지 Vol.20 No.2

Failure of bond between resinous restorative materials and tooth can be occured by the polymerization contraction forces larger than bond strengths. This study was planned to confirmed that the bond strengths between composite resin and acid etched enamel will be influenced by the polymerization contraction forces altered with filler contents and diameter of attached resin specimens. Ten kinds of experimental composite resins were prepared and bonded to bovine tooth enamel which were acid-etched. The diameter of resin specimens attached were 4 mm and 6 mm. The following conclusions were drawn : 1. Shear bond strengths were increased and then decreased with rise of filler contents, maximum shear bond strength was obtained by the 40% filled composite resin. 2. Unit shear bond strengths of resin specimens bonded with large area were lower than that of narrow area bonding. It was concluded that shear bond strengths to acid etched enamel can be influenced by the polymerization contraction forces.

복합 병렬 전단벽 접합부의 전단강도

박완신,한병찬,황선경,윤현도,이재연,이원호 대한건축학회 2004 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.24 No.1(구조계)

An theoretical study of the strength of hybrid coupled shear wall connections is achieved. The bearing stress at failure in the concrete below the steel coupling beam section is related to the concrete compressive strength and the ratio of the width of the steel coupling beam section to the width of the hybrid coupled shear wall. Also experimental studies are achieved to revise shear transfer strength across connections between coupled shear walls and steel coupling beam. The main test variables were auxiliary details of stud bolts. In this studies. these proposed equations are shown to be in good agreement with the test results reported in the paper and with other test data in the literature.

복합레진의 중합 수축력과 수복물의 결합양상에 관한 연구 제 3 편 변연누출과 틈새

박남수,최대균,임호남,최부병,우이형 大韓齒科器材學會 1993 대한치과재료학회지 Vol.20 No.2

This study was designed to confirm the influence of the polymerization contraction stress to the marginal leakage and gaps of resin restorations. Ten kinds of experimental composite resins were prepared with varing the filler contents to display the different polymerization contraction stress. A cavity with enamel and dentin margins were prepared on the cervical area of human tooth. Enamel margins were etched with 37% phosphoric acid for 1 minute. Experimental composite resins were filled into the cavities and immersed in water bath of 37±1℃ for 24 hours, and then immersed into dye solution. Tooth were cut through the restoration, and the infiltration of dye was observed. Marginal gaps were measured on the light microscope with 100 magnifications. The following conclusions were drawn : 1. Polymerization contraction stress and gaps showed the corelation between them, gaps were decreased by increase of filler contents. 2. There was not exist the relationships between polymerization contraction stress and marginal leakage. 3. Marginal leakage and gaps were larger at dentinal margins than enamel margins.

진폐진행정도에 따른 혈청내 구리와 아연 농도의 변동

박정래,박종욱,이수일,이철호,오차재,김창원,조병만,김돈균 大韓産業醫學會 2000 대한직업환경의학회지 Vol.12 No.3

목 적 : 진폐증은 분진으로 인해 인체의 면역기전이 작용하여 폐섬유화가 진행되는 질환으로, 인체의 면역기전에 작용하는 구리와 아연은 진폐증의 병리적인 진행과정인 폐섬유화에 관여한다. 본 연구의 목적은 초기진폐증 유소견자와 진행된 진폐증 환자의 혈청 구리와 아연의 농도를 정상인과 비교함으로써 체내 구리와 아연의 농도가 진폐증의 섬유화의 진행정도에 따라 변동함을 밝히고, 이를 이용하여 폐섬유화의 진행정도를 추정할 수 있는 지표를 제시하고자 한다. 방 법 : 진폐정밀기관에 내원한 초진내 원자 100명과 진폐요양기관에 입원한 진폐증 환자 100명을 선정한 후 흥부사진소견을 ILO 분류법의 진폐진행정도에 따라 각각 세 군(Stage Vl, V2, V3 & Stage Pl, P2, P3)으로 구분한 후 각 군의 혈청구리와 아연의 농도를 비교분석하였다. 대조군으로는 폐결핵, 심근경색, 뇌경색을 경험한 적이 없는 일반인 100명을 선정하였다. 결 과 : 초진내 원자군의 혈청 구리농도는 섬유화의 진행단계에 따른 유의한 차이를 보였으며, Stage V3에서 가장 높았다. 입원환자군에서는 혈청 구리농도가 대조군과 유의한 차이를 보이지 않는데 (p=0, 152), 이는 입원환자의 불량한 영양상태와 건강상태 때문인 것으로 추정된다. 초진내원자군과 입원환자군의 혈청 아연농도는 섬유화의 진행에 따라 통계적인 차이를 보였으며, Stage V2와 Stage P2, P3에서 각각 대조군에 비해 유의하게 낮았다. 혈청 아연과 구리농도의 비또한 양군에서 섬유화의 진행에 따라 의미있게 높았는데, 섬유화가 현저히 진행된 단계 (Stage V3, Stage P2, P3)에서 대조군과 의미있는 차이를 보였다. 결 론 : 초진내 원자와 입원환자의 혈청 Cu/zrl 비는 섬유화의 진행정도가 현저할수록 대조군에 비해 유의하게 높게 나타났다. 진폐증 환자들의 혈청 Cu/zn 비는 진폐증의 폐섬유화의 진행정도를 추정함에 있어 상당히 유용한 지표로 이용될 수 있으며, 폐섬유화의 진행과정에서의 혈청 구리와 아연의 작용기전을 이용한 치료방법의 마련에도 도움이 될 것으로 판단한다. Objectives : Copper and Zinc, the trace elements of a living body, take a part in immunologic mechanism and induce the pulmonary fibrosis which is the pathologic progress of pneumoconiosis. This study was performed to assist the identification of the pathologic process of pulmonary fibrosis in pneumoconiosis. Methods : The subjects of thls study was 200 diagnosed persons as pneumoconiosis, of whom 700 persons was the visitors in the outpatients departments of pneumoconiosis and 100 admissive pneumoconiosis patients. The serum copper and zinc are measured and compared. Results : The mean serum copper concentration of visitor group was significantly higher than that of control group, and that of stage V3 subgroup of visitor group was highest because of their advanced fibrosis. But, there was not the difference of serum copper concentration between patient and control group. We thought that the reason was poor nutritional and health status of the patient. The mean of serum zinc concentration of visitor and patient control was lower than that of control group. As the degree of pulmonary fibrosis was more severe from stage Vl, V2, V3 of visitor to stage Pl, P2, P3 of patient, the mean of serum zinc concentration was lower. The ratio of serum copper/zinc of visitor and patient was higher than that of control, and that of patient was higher than that of visitor. Those results showed that the ratio of serum copper/zlnc ratio more greatly expressed the degree of progression of pneumoconiosis than only copper or zinc concentration by adjustment of nutritional and health status of the patient. Conclusions : As above study results, the degree of pulmonary fibrosis of pneumoconiosis could be estimated by means of serum copper/zinc ratio.

열공형과 비열공형 피질하 혈관성 치매에서 위험인자의 차이에 관한 비교 연구

배희준,정지향,유경호,나덕렬,김상윤,최경규,양동원,손의주,이상도,김재우,박경원,김응규,이재홍,박미영,한일우,함동석,최문성,하충건,최성혜,이애영,이병철,한설희 대한치매학회 2003 Dementia and Neurocognitive Disorders Vol.2 No.2

Backgrounds and Objectives: Vascular dementia is a group of dementing disoders arising from various stroke syndrome. Among these. subcortical ischemic vascular dementia (SIVD) is regarded as a relatively distinct clinical entity. However, MRI patterns of SIVD are not homogenous. In some patients, lacunes are dominant, and in others, subcortical white matter changes are. This study was designed to compare risk factor profiles between SIVD with and without multiple lacunes. Methods: We divided 47 subjects (22 males, mean age. 68 years) recruited from VADAPET (Multicenter Trial For Evaluation Of The Changes In the PET Images Of Subcortical Vascular Dementia Patient) study into two groups one with more than 5 lacunes in deep gray matter (lacune group) and the other with 5 or less(non-lacune group) Clinical characteristics and laboratory findings of two groups were compared. Results: Nineteen of 47 patients (40%) belonged to the lacune group. The lacune and non-lacune groups d d not differ in the following variables: age, hypertension, diabetes mellitus, hyperlipidemia heart disease, history of stroke or TIA, history of trauma or major surgery, family history of hypertension stroke, or dementia, age at diagnosis of dementia, body mass index, white blood cell count, ESR, CRP, fibrinogen, hemoglobin A1C, total cholesterol. LDL cholesterol creatinine, proteinuria, glucosuria, and microhematuria. However, male sex, smoking alcohol. hemoglobin, and HDL cholesterol were possibly associated more with lacune group SIVD than with non-lacune group (p<0 1) Multivariate analyses revealed that smoking, hemoglobin, and HDL cholesterol were independent predictors of SIVD with multiple lacunes Conclusion: Our study suggests that SIVD with multiple lacunes may be significantly different in smoking habits hemoglobin, and HDL cholesterol from SIVD without multiple lacunes.

복합레진의 중합 수축력과 수복물의 결합양상에 관한 연구 제 1 편 : 중합수축력

박남수,최대균,임호남,최부병,우이형 大韓齒科器材學會 1993 대한치과재료학회지 Vol.20 No.1

The polymerization contraction forces has a relationship with the contents of filler, and if forces surpass the bond strength between restoration and bonded surface, the failure of bond can be occured. This study was designed to evaluate the effects of filler contents on the polymerization contraction forces and to confirm whether the polymerization forces could induce the bond failure of composite resins to enamel or dentin. Low capacity load cell using strain gauge were prepared and used as a measurement system for polymerization contraction forces. Oxidized alloy surfaces, enamel surfaces and dentin surfaces were used as bonded surface. Measurements of the polymerization contraction forces were done for 1 hour, and a stress at 1 hour after was recorded as a polymerization contraction force. It was considered as a bond failure that the polymerization contraction forces increased and then decreased by the time. The following conclusions were drawn : 1. Polymerization contraction forces of composite resins were decreased by the increase of filler contents. 2. Polymerization contraction forces were increased at thickened resin specimens, but it was not significant at over two millimeter thickness. 3. Bond strength of composite resins to the acid etched enamel surfaces exceeded the polymerization contraction forces and the reduced polymerization contraction forces due to the bond failure were not confirmed. 4. Failure of bond and reduced polymerization contraction forces occured on dentin.

치과기공사의 직업만족도 측정을 위한 설문도구의 개발

오세윤,김웅철,김지환,이병기,유진호,김태석,이준석,이주호 高麗大學校 倂設 保健大學 保健科學硏究所 2002 保健科學論集 Vol.28 No.2

Conflicts between individuals are quite natural and they can act as an positive contributing factor not only to the development of an individual but also to the organization to which one belongs. But too much conflicts will always induce dissatisfaction and stresses, which will be destructive and harmful to all of them, and that is why we are always tying to seek(find) out the causes for the origination of conflicts and remedies to cope with them effectively. The present study, as the first one in a series of studies which our researchers contemplate executing, was designed to develop a measure of job satisfaction for dental laboratory technicians. One job satisfaction measure and two job satisfaction related measures, one for faithfulness for the job and the other for environmental characteristics of dental laboratory were newly developed. The newly developed measures were comprised of a total of 38 items, which were each 12 items for job satisfaction and faithfulness for the job and 14 items for environmental characteristics of dental laboratory With the aid of factor analysis for principal components and categorization of items by panel of professionals, items of each measure were grouped into 2-4 subscales. Contribution to internal consistency was the fina) criterion for an item's inclusion in a subscale. Internal consistency reliability of each item was attested through the statistical analysis on the data obtained from 55 structured questionnaires. Reliability of internal consistency of subscales in each measure of job satisfaction and faithfulness for the job ranged from 0.74 to 0.79 and 0.90-0.91 respectively. The result from this research came to draw the following conclusions. 1. Validity and internal consistency reliability of all the items of each measure was attested. 2. The newly developed measure of job satisfaction was found to be appropriate for (measuring the degree of job satisfaction of) dental technicians, as well as for (other) dental office personnels.