하지 절단자 보행의 운동역학적 분석

임규찬,박윤서,배성제,정철수,신인식,김복영 師範大學 體育硏究所 1994 서울大學校 體育硏究所論集 Vol.15 No.2

This study was conducted to investigate the biomechanical characteristics of the gait pattern in an amputee for the purpose of improving the proper gait posture and designing the prosthetic. The subjects were six males amputees and one normal person. The ground reaction force was measured using AMTI force platform. The conclusions were as follows; 1. In case of amputee group, the ground reaction force was revealed in specific figure according to position in which they used the prosthetic, whereas in case of normal person the ground reaction force was revealed in the figure of two humps in regard of vertical axis. 2. In case of amputee group, the ground reaction force in time between fight foot contact and left foot contact was deviated from a figure of rectangle, whereas in case of normal person the ground reaction force was revealed in the figure of rectangle. 3. In case of amputee group, the ground reaction force referred to both feet angle point of view was revealed in irregular figure, whereas in case of normal person the ground reaction force was revealed about 47。

熱環境의 理論的 背景에 관한 硏究

林晩澤,朴京甲,鄭圭福,鄭碩熙 조선대학교 국토개발연구소 1993 국토개발연구 Vol.13 No.1

The design ranges of human-environmental system can be divided into seven kinds, water, thermal, air, light, acoustic, color, psychology and environment. This study aims at clarifying the theoretical background of thermal environment is what point of view is historically. Thermal environment developed based on the thermal comfort index, standard and law establishment etc. To constitute the amenity of thermal environment and to control it, it needs to prediction and adaptability.

모 연취급장 근로자들의 연폭로지표들과 혈압과의 관련성

임상복,김용배,이용진,리갑수,김화성,황규윤,장봉기,이성수,안규동,이병국 순천향대학교 산업의학연구소 1998 순천향산업의학 Vol.4 No.1

In order to investigate the relationship between blood lead with other lead exposure indices and blood pressure in occupationally lead exposed male workers, 629 workers(515 lead exposed workers and 114 non lead exposed workers) in a storage battery factory were studied. Blood lead(PbB), zinc protoporphyrin(ZPP) and urinary δ-aminolevulinic acid(ALAU) were selected as an index of lead exposure. Height and weight were also meaured with calibrated automatic height-weight machine to produce fatness index directly. Personal information on smoking and drinking history were also collected. Blood pressure was mearured by trained nurses with automatic sphingomanometer. All workers took at least 30 minute rest before their measurement of blood pressure. The results obtained were as follows: 1. The prevalence rate of hypertension of lead exposed and non-exposed workers were 3.5% in both group without any difference. 2. There were no differences of systolic and diastolic pressure between groups divided by lead exposure, smoking habit, drinking habit. but the increase of age group made the difference of diastolic pressure, and only differenct of systolic pressure observed in age group of less than 20 and that of more than 40. 3. In pearson's correlation analysis, PbB was correlated with systolic pressure significantly, but not with diastolic pressure. PbB was also correlated with pressure difference(systolic pressure-diastolic pressure). 4. There were no significant increase of systolic, diastolic pressure and pressure difference by the increase of PbB and ZPP grouping. 5. Stepwise multiple regression analysis using systolic pressure as dependent variable and PbB, ZPP, ALAU, age, work duration, smoking habit, drinking habit and fatness (weight*0.9/height-100) as independent variables, revealed that PbB, age, drinking habit and fatness in order were significantly contributed to the dependent variable. 6. Stepwise multiple regression analysis using diastolic pressure as dependent variable and PbB, ZPP, ALAU, age, work duration, smoking habit, drinking habit and fatness (weight*0.9/height-100) as independent variables, revealed that ALAU, age and fatness in order were significantly contributed to the dependent variable. 7. Stepwise multiple regression analysis using pressure difference as dependent variable and PbB, ZPP, ALAU, age, work duration, smoking habit, drinking habit and fatness(weight*0.9/height-100) as independent variables, revealed that PbB, age and fatness in order were significantly contributed to the dependent variable. 8. Logistic analysis of hypertensive conditions with categorized blood lead and other selected categorized independent variables indicated that only age(40> and 40≤) and fatness(1.0> and 1.0≤) were significantly contributed to dependent variable with 95% significant odd ratio confidence interval. With above results, lead exposure in terms of blood lead seemed to be minimally contributed to the raise of blood pressure, and the effect of blood lead was found to be more prominent on the pressure difference than the systolic and diastolic pressure themselves.

대게 Chionoecetes opilio (O. Fabricius)의 난발생 및 부화 유생의 형태

이복규,임영수,이종관,허성범 동의대학교 기초과학연구소 1999 基礎科學硏究論文集 Vol.9 No.1

This paper documented mophological changes of embryonic development and first zoea larvae of snow crab, Chionoecetes opilio. Female crabs were sampled by the Danish seine fishery at the depth about 200m in Sep. 1997 in the eastern coast of Korea. Female with newly berried eggs was reared at the water temperature of 5℃ till the time of hatching. The results obtained are as follows. Embryonic development : According to morphogenesis of fertilized eggs, the developmental process of the embryo was classified into the following seven stages : First stage (cleavage and blastula stage, 24 days) Second stage (gastrula stage, 72 days) Third stage (nauplius stage, 22 days) Fourth stage (metanauplius stage, 57 days) Fifth stage (stage of a pigmentary deposit in the compound eye, 30 days) Sixth stage (chromatophore appearance stage in maxillipede, 56 days) Seventh stage (hatching stage, 36 days) Larvae hatched as prezoeas and they molted to first zoea in about an hour. The first zoea is 4.6 to 5.1 ㎜ in length, 3.2∼3.6 ㎜ in width. The abdomen consists of five segments and a bifurcate telson.

멀리뛰기 발구름 동작시 아킬레스건각이 도약속도와 도약각도에 미치는 영향

김복영,배성제,신인식,정철수,임규찬 師範大學 體育硏究所 1992 서울大學校 體育硏究所論集 Vol.13 No.2

The purpose of this study was to investigate the effect of lower leg planting angle an on take-off motion of the long jump. The Achilles tendon angle defined as the angle between shank and calcaneus with projection to XY plane was introduced to interprete lower leg motion uring last foot touch for the flight phase of long jump. A typical high speed film analysis technique including DLT method was adapted to record and analyze total of nineteen long jumps performed by elite athletes at two different track and field events. The following were found that: 1. The relationship between touch-down velocity, take-off velocity, range of vertical velocity and flight length were significantly related each others as r=0.6383, 0.6395 respectively at t=0.01 level. 2. It was not possible to reveal the relationship between take-off angle and flight length. Due to highly consistent take-off angles shown between the long jumpers. 3. The angular displacement of the shank during the last foot contact just before flight phase was negatively related to the flight length(r= -0.6149). However, it was not possible to find the relationship between the aehilles tendon angle and flight length. 4. As the range of the body C.O.G lean angle increased the last step foot contact time significantly increased(r=0.8625). 5. The foot contact time of Korean elite long jumpers was somewhat longer than that shown by foreign Athletes. It is concluded that maintaining touch-down velocity during initial phase of foot touch and increasing take-off velocity would result optimal take-off angle and good record. Decrease in the angular displacement of the shank, foot contact duration, and the range of body C.O.G lean angle were found to be important to improve the flight length.

마하피닝 처리에 의한 기계구조용 합금강의 피로균열전파 지연효과

김민건,임복규,박홍기,황중각 강원대학교 산업기술연구소 2006 産業技術硏究 Vol.26 No.B

Mach peening treatment is one of the various kinds of techniques to improve the fatigue properties. The mach peening process gives high-level work hardening and compressive residual stress near the surface layer, improving the fatigue strength. In addition, this treatment reduces slip bands that initiate the fatigue cracks near the surface. During impingement, a plastic indentation surrounded by a plastic zone is formed. Mach peening treatment characteristic is less energy consumption and is an environmental friendly processing methods that is not accompanied by pollution. It is machining process that can prevent fatigue fracture beforehand in structure using already as well as process of production. The test results showed that fatigue crack propagation delay appeared by drilling type 43%, mach peening type 110%.

오스템퍼링처리한 구상흑연주철의 오스테나이트화 조건에 따른 기계적 성질 및 피로한도에 관한 연구

김민건,임복규 江原大學校 産業技術硏究所 2004 産業技術硏究 Vol.24 No.A

This study was performed to investigate the effect of two step austenitized treatment on the mechanical properties and fracture characteristic of the ductile cast iron and austempered ductile cast iron(ADI). The obtained results of this study were as follows. The matrix structures of specimens were changed differently by austenitizing heat treatment Microstructure of austempered ductile cast iron obtained by two step austenitized treatment was bainitic ferrite and retained austenite. With two step austenitized treatment, vield strength, tensile strength and hardness decreased, while the elongation increased.

마하피닝 처리에 의한 기계구조용 합금강의 피로균열전파 지연효과

김민건,임복규,박홍기,황중각 강원대학교 산업기술연구소 2006 産業技術硏究 Vol.26 No.A

Mach peening treatment is one of the various kinds of techniques to improve the fatigue properties. The mach peening process gives high-level work hardening and compressive residual stress near the surface layer, improving the fatigue strength. In addition, this treatment reduces slip bands that initiate the fatigue cracks near the surface. During impingement, a plastic indentation surrounded by a plastic zone is formed. Mach peening treatment characteristic is less energy consumption and is an environmental friendly processing methods that is not accompanied by pollution. It is machining process that can prevent fatigue fracture beforehand in structure using already as well as process of production. The test results showed that fatigue crack propagation delay appeared by drilling type 43%, mach peening type 110%.

극저사이클 하중을 받는 구상흑연주철의 초기균열성장에 관한 연구

김민건,임복규,김동열 江原大學校 産業技術硏究所 2002 産業技術硏究 Vol.22 No.A

In this study, extremely low cycle fatigue tests were carried out under push-pull loading conditions using graphite cast iron (GCD). In order to clarify the fatigue fracture mechanism of GCD in an extremely low cycle fatigue regime successive observations of internal fatigue damage were performed. The results obtained are as follows. (1) The process of extremely low cycle fatigue can be classified into three stages which are composed of the generation, growth and coalescence of microvoids inside materials. (2) In an extremely low cycle fatigue regime, microvoids originate from debonding of graphite-matrix interface.

A Study on the Fatigue Life of Semi ADI

Bok Kyu Lim 한국주조공학회 2008 한국주조공학회지 Vol.28 No.1