http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
아크릴 폴리머를 사용한 투수 콘크리트의 물성 비교 평가
황병일(Byoung-Il Hwang),김효정(Hyo-Jung Kim) 한국산학기술학회 2019 한국산학기술학회논문지 Vol.20 No.7
본 논문의 목적은 기존의 에틸렌기반 폴리머 사용 배합인 투수 콘크리트 단점을 개선하고자, 아크릴 폴리머를 적용함으로써 개선된 도로 포장 재료로써 활용하기 위한 기초자료를 제시하고 한다. 기존의 에틸렌 폴리머 기반 투수 콘크리트 재료를 선정하고, 아크릴 폴리머를 혼입하여 배합 설계하여 비교 평가하였다. 시험결과, 기존 에틸렌 기반 폴리머 투수 콘크리트 배합 경우 큰 공극률이 발생하여 압축강도 증진이 미약한 결과를 나타냈었고, 아크릴 폴리머 기반 투수 콘크리트 배합 경우 KS에서 규정하고 있는 차도용 28일 압축강도 24MPa을 만족하였다. 휨강도인 경우, 아크릴 폴리머 기반 투수 콘크리트 배합 강도가 우수하였으며, 투수 계수는 모든 변수에서 기준인 0.1(㎜/s) 이상으로 측정되었다. 흡수율의 경우 모든 변수에서 1% 이하로 측정되었고, 동탄성계수 측정결과, 아크릴 폴리머배합특성의 경우 120Cycle 이상 측정을 유지할 수 있었고, 다른 배합의 경우 80 Cycle 이상 유지하지 못하였다. 따라서 기존의 에틸렌 폴리머 기반보다 아크릴 폴리머를 적용함으로써, 내구성 향상에 효과적인 것으로 판단된다. The aim of this paper was to improve the shortcomings of Pitcher Concrete, a conventional ethylene-based polymer used in combination with the other components, and present basic data for use as improved road pavement material by applying an acrylic polymer. Existing ethylene polymer-based pitcher concrete materials were selected. Acrylic polymer was then added and the resulting mixture was evaluated. The compressive strength of the existing ethylene-based polymer pitcher concrete combination was low due to the large air gap, and a compressive strength of 24MPa was observed on the 28th day of road use, as defined by KS for an acrylic polymer-based pitcher concrete combination. Regarding the bending strength, the combined strength of the acrylic polymer-based pitcher concrete was excellent, and the factor of the pitcher was measured above the reference, 0.1(㎜/s), in all variables. All parameters measured were less than 1%. The acrylic polymer mixing characteristics were able to maintain the dynamic modulus of elasticity for more than 120 cycles, but not more than 80 cycles for the other combinations. Therefore, the addition of more acrylic polymer than conventional ethylene polymer base is effective in improving the durability.
산업부산물로 제조된 활성 슬래그 바인더를 활용한 알칼리활성화 시멘트 모르타르의 특성
황병일 ( Hwang Byoung Il ),강혜주 ( Kang Hye Ju ),이후석 ( Lee Hoo Suk ),강석표 ( Kang Suk Pyo ) 한국건축시공학회 2018 한국건축시공학회 학술발표대회 논문집 Vol.18 No.1
In this paper, we tried to find the proper ratio of industrial byproducts which can express mechanical characteristics similar to ordinary portland cement by varying the ratio of industrial byproducts. as a result, the activated slag binder produced by the industrial byproduct in this study increased in compressive strength as the ratio of blast furnace slag increased and the fly ash ratio decreased.
레드머드를 대체한 시멘트 모르타르의 양생방법에 따른 압축강도 특성
황병일 ( Hwang Byoung Il ),강혜주 ( Kang Hye Ju ),이후석 ( Lee Hoo Seok ),강석표 ( Kang Suk Pyo ) 한국건축시공학회 2017 한국건축시공학회 학술발표대회 논문집 Vol.17 No.2
Red mud is an inorganic by-product produced from the mineral processing of alumina from Bauxite ores. This study is to investigate characteristic with respect to curing conditions according to the red mud content. The results best of best showed that the water curing compressive strength better than atmospheric curing, steam curing.
액상 레드머드 첨가방식에 따른 ASRC 콘크리트의 특성
황병일 ( Hwang Byoung Il ),강혜주 ( Kang Hye Ju ),박경수 ( Park Kyung Su ),강석표 ( Kang Suk Pyo ) 한국건축시공학회 2018 한국건축시공학회 학술발표대회 논문집 Vol.18 No.1
In this paper, we investigate the characteristic of ASRC concrete with the addition of liquefaction red mud using red ud which can be used as an alkali activator of alkali-activated slag cement. as a result, the compressive strength and the efflorescence area increased, and as the amount of liquid red mud increased, the compressive strength decreased and the efflorescence area increased.
황병일 ( Hwang Byoung Il ),김효정 ( Kim Hyo Jung ),송용순 ( Song Young Soon ),조인성 ( Cho In Sung ) 한국구조물진단유지관리공학회 2019 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.23 No.1
In study, we have developed permeable concrete for rotary intersections and tried to compare the basic properties with existing permeable concrete.
폐 발포폴리스티렌과 발포폴리스티렌 비드를 활용한 경량 모르타르의 특성
강석표,황병일,Kang, Suk-Pyo,Hwang, Byoung-Il 한국건축시공학회 2017 한국건축시공학회지 Vol.17 No.5
본 논문에서는 발포폴리스티렌 비드 (EPB)와 폐 발포폴리스티렌 (WEP)의 대체율에 따른 경량 모르타르의 기초 특성을 평가였다. EPB 및 WEP를 이용한 경량 모르타르의 기초 특성으로서 단위용적중량, 압축 강도, 휨강도, 흡수율, 열전도율 및 폴리스티렌 (EPB 및 WEP) 분포를 분석하였다. 그 결과 경량 모르타르는 WEP의 대체율이 증가할수록 단위용적중량, 압축 강도, 휨강도, 흡수율 및 열전도율은 증가하고, 폴리스틸렌 면적 분포는 감소하였다. This study presents an evaluation of basic properties of light weight mortar with expanded polystyrene bead(EPB) and waste expanded polystyrene(WEP) by varying replacement rations. In order to evaluate the basic properties of the light weight mortar with EPB and WEP, unit weight, compressive strength, flexural strength, water absorption ratio, thermal conductivity and distribution of polystyrene (EPB and WEP) in hardened mortar were performed. As a result, unit volume, compressive strength, bending strength, water absorption and thermal conductivity of light weight mortar were increased, but area distribution of polystyrene decreased with increasing the replacement ratio of WEP.
양생조건에 따른 레드머드 혼입 알칼리활성화 슬래그 시멘트 모르타르의 강도 및 백화특성
강석표,황병일,Kang, Suk-Pyo,Hwang, Byoung-Il 한국건축시공학회 2018 한국건축시공학회지 Vol.18 No.3
본 논문은 알칼리활성화 슬래그 레드머드 시멘트의 백화저감을 위한 기초연구로서 다양한 온도 및 습도 조건이 레드머드 혼입 알칼리활성화 슬래그 시멘트의 강도 및 백화에 미치는 영향을 보통 포틀랜트 시멘트와 비교하여 검토하였다. 양생조건에 따른 레드머드 혼입 알칼리활성화 슬래그시멘트의 강도 및 백화특성 검토결과 표준수중양생을 실시한 모르타르는 기건양생, 고온양생, 저온양생과 비교하여 28일 압축강도, 휨강도가 가장 높게 나타났으며 흡수율 및 백화발생면적, $Na^+$용출량은 가장 낮게 나타났다. 따라서 향후 레드머드의 대량 활용을 위한 방안으로서 적정한 양생조건은 수중양생으로 사료된다. This study is to investigate the effect of various temperature and humidity conditions on the strength and efflorescence of alkali activated slag cement(AAS) using the red mud. As a result of examining the strength and efflorescence characteristics of AAS mixed with red mud according to the curing conditions, The compressive strength and flexural strength were the highest at 28 days, but the absorption rate, efflorescence area and soluble $Na^+$ elution were lowest in standard wet curing compared to the air curing, high temperature curing and low temperature curing.