http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
자원봉사자에 의한 개인상담과 보호관찰 청소년의 재비행: 탐색적 연구
홍은애,오경자 한국임상심리학회 2002 Korean Journal of Clinical Psychology Vol.21 No.2
In the present study, effect of individual counseling by volunteer counselors was evaluated by comparing the recidivism rate during the 2-year probation period of 171 juvenile delinquents on probation who were provided with monthly individual counseling by volunteers (Counseling Group) to the recidivism rate of another group of 256 juvenile delinquents monitored through routine monthly meetings with probation officer(Non-counseling Group). The results showed that the overall rate of recidivism did not differ for the Counseling(31%) and Non-counseling Group(39%). Stepwise discriminant function analyses with regard to recidivism during the 2-year probation period revealed that age and prior record of delinquency (Counseling Group), and history of running away from home prior to age 15 and mother's education level(Non-counseling Group) were highly correlated with the discriminant function in the respective groups.
AMD를 이용한 건물의 풍직각방향 응답 제어 -테크노마트 건축물 적용을 중심으로 -
홍은애,이상현,우성식,황재승,정란 한국풍공학회 2013 한국풍공학회지 Vol.17 No.1
본 연구에서는 풍진동 제어를 위해 39층 테크노마트 건물에 능동형 질량 감쇠기를 적용하기 위한 수치해석적 연구를 수행하였다. 먼저, 태풍 풍응답 계측 및 풍동실험을 통해 테크노마트 단변방향 진동에 대한 사용성 개선이 필요함을 확인하였다. AMD에 요구되는 스트로크 확보를 위한 건물의 여유 공간, 설치 위치, 허용 무게 등을 알아보고 제진장치 배치 및 사양을 결정하였다. 그리고 테크노마트의 최상거주층인 39층 단변방향을 대상으로 한 1자유도 해석모델에 대해 선형제어방법인 속도피드백, LQR, LQG 알고리즘과 비선형제어방법인 Bnag-bang 알고리즘을 적용하는 해석연구를 수행하였다. 해석결과 제어 전·후의 최대가속도는 11.83cm/s2에서 4.19cm/s2으로, 진동감지확률은 90%에서 50%이하로 감소하여 Bang-bang 제어알고리즘을 적용할 경우 제어성능이 가장 좋은 것을 확인하였으며 각각의 알고리즘으로 구현된 AMD의 최대 스트로크가 모두 허용범위 수준을 만족하는 결과가 나왔다. 또한, 실제 AMD의 안정적은 작동을 위해 요구되는 원점보정 신호 방안을 제안하여, 제한된 스트로크 내에서 제진장치를 안정적으로 운행할 수 있음을 확인 하였다. In this research, a numerical study was performed for a practical application of an Active Mass Damper(AMD) to wind-induced vibration control of the 39-story Technomart 21 building. Through measurement of wind-induced responses by typhoon and wind tunnel test, it was determined that serviceability of the Technomart should be improved. As the first step, available space for the damper installation and the effect of the additional mass on safety of the existing structures were investigated. And an analytical study was performed by applying the velocity feedback, LQR, and LQG as linear control methods and Bang-bang as nonlinear ones. As a result, bang-bang was verified to have the best control performance reducing peak acceleration 11.83cm/s2 to 4.19cm/s2 and the level of vibration perception 90% to under 50%. And maximum stroke of the AMD required by each control algorithm was satisfied with an acceptable level. Also, a new algorithm for selfpositioning of the AMD to zero displacement point was proposed for the AMD to function safely within the stroke limit and it was verified that the AMD would operate safely within the limited stroke due to the addition of this signal.
디지털 유방단층촬영의 피폭선량 경감을 위한 수동 촬영조건의 가이드라인 제시
홍은애,이인자 대한방사선과학회 2016 방사선기술과학 Vol.39 No.4
유방촬영 시 디지털 유방촬영 후 디지털 유방단층촬영을 한 60명 환자에 대한 촬영 조건을 분석하였다. 그결과 디지털 유방단층촬영을 한 환자에 대한 피폭선량이 많음을 알았고 그 대책법으로 ACR 팬텀으로 촬영조건을 자동노출조건이 아닌 수동노출조건으로 변경하여 영상의 식별능과 환자피폭선량을 실험하였다. 그 결과CC(Cranio-Caudal)촬영인 경우 촬영조건 중 kVp는 디지털 유방단층촬영 시 디지털 유방촬영보다 2kVp 높게 설정되어 있었다. 또 mAs는 디지털 유방단층촬영이 55.2% 감소되어 약 60mAs를 주는 것으로 나타났다. 이때 환자의평균유선선량(AGD)은 디지털 유방촬영에서는 1.65mGy, 디지털 유방단층촬영에서는 1.87mGy로 디지털 유방단층촬영에서 0.22mGy 많이 받는 것으로 나타났다. 팬텀을 이용한 실험에서 kVp는 자동노출조건인 29kVp로 고정하고, mAs을 수동조건으로 감소시키면서 실험한 결과 mAs를 80% 줄여도 영상의 식별능 평가 기준인 10점 이상으로 영향이 없는 것으로 나타났다. 이때 평균유선선량(AGD)도 0.66mGy로 줄일 수 있었다. 디지털 유방촬영시행 후 디지털 유방단층촬영 시 자동노출조건을 그대로 적용하기 보다는 수동노출조건으로mAs조건을 감소 시켰을 때 영상의 진단적 가치를 유지하면서 환자의 피폭선량경감에 효과가 있었다. 최근 디지털유방단층촬영의 유용성이 높아지고 있는 만큼 본 연구에서 수동촬영조건의 가이드라인을 제시함으로서 진단적 가치를 높임과 동시에 환자피폭선량을 줄일 수 있을 것으로 사료된다.
홍은애,윤성호,백인관,조승호,이상현,정란 단국대 부설 리모델링연구소 2011 리모델링 연구소 논문집 Vol.9 No.2
Recently, a market of architecture is requiring buildings of long spanned structures as most buildings become taller and larger. For being long spanned structures, elements of buildings must be light. As an alternative proposal, various hollow-core slabs and flat plate salbs were developed and used frequently in the inside and outside of the country. But the study of the hollow-core slabs using deck plate and assembly of light weight is the first. In the present study, Flexural and vibration tests were performed on the hollow-core slabs using deck plate and assembly of light weight to investigate the flexural behavior and serviceability. Four test specimens were used for test parameters; one hollow-core slab with an assembly of light weight, and three hollow-core slabs with deck plate and an assembly of light weight. The test parameters also included amount of tension bar and existence of shear reinforcement. The test results showed that the hollow-core slabs with deck plate and an assembly of light weight had a crack of shear, so shear reinforcement must be conducted.