http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
발달장애 아동의 대체 자극 제시가 자기자극행동 감소에 미치는 영향
홍석용 단국대학교 사범대학 특수교육과 2000 특수교육 사례연구 Vol.6 No.-
이 연구의 사례 아동에게서 보이는 문제행동이라 할 수 있는 제자리에서 돌기, 원을 그리며 뛰기와 같은 자기자극행동을 제거하기 위한 방법으로, 다른 적절한 자극인 그리기 도구를 제시한 결과는 만족할만한 수준이다. 하지만 아동이 선호하는 요소의 투입과정에서 원래의 문제 행동을 없앨 수는 있었으나, 그리기 도구를 이용한, 그림을 그리는 행위에 대해서는 약간의 집착성 반응을 이끌어 내는 결과를 초래하게 되었다. 문제행동 처치 상황에서 의도하지 않게 발생한 이와 같은 새로운 행동 채턴에 대해서 또 다른 조치를 하려 하였으나, 2000년 5월 22일부터 아동이 전일제로 운영되는 사설 조기교육기관에 임시로 위탁되어 얼마간 학교에 나오지 못하게 되었기 때문에 적절한 후속 조치를 취하지는 못하였다. 이상과 같은 연구 결과로, 부적절한 자기자극 행동을 제거하기 위해서는 다른 대체 자극의 제시가 효과적이라는 것을 확인할 수 있었다. 하지만, 대체 자극의 선택에 있어서 신중한 고려가 선행되어야 하며, 아동이 가장 선호하는 것을 이용한 자극제시를 한다 하더라도 항상 최선의 결과가 뒤따르지는 않는다는 것을 알 수 있다. 이와 같이, 한 아동에게 있어서 부적절하다고 판단되어지는 행동을 제거하는 일은 결코 간단하거나 분명하게 드러나는 것이 아니다. 발달상의 장애를 가진 아동의 문제 행동을 개선시키기 위한 노력과 그 과정은 보다 과학적이고 체계적으로 이루어져야 할 것이다. 우선, 대상 아동의 여러가지 행동들 가운데서, 학습과 일상생활 과정에 부정적인 영향을 미치는 문제행동을 정확하게 가려낼 필요가 있다. 문제행동에 대한 정의가 내려지게 되면, 그러한 행동을 유발시키는 결정적인 원인을 찾아내야 하는데, 발견된 원인에 다라 아동에게 주어지는 처치의 유형이 달라지게 될 것이다. 그 원인이 무엇이냐에 따라서 문제행동을 유발하는 원인을 근절시키거나, 적절한 행동을 유도하는 다양한 자극을 제시하는 등의 효율적인 방법을 사용하여야 한다. 또한 이러한 처치과정에서 아동을 둘러싼 환경, 정서적 상태, 인지, 사회적 능력 등과 같은 개인적 특성들은 충분히 고려되어야 하며, 아동의 반응이나 처치과정의 결과로 유발되어지는 또 다른 문제들은 없는지에 대한 세심한 관찰과 점검이 이루어져야 할 것이다. 이와 같은 노력들이 이루어질 때에야 발달상의 장애를 가지고 있는 아동들의 문제행동을 근본적으로 제거할 수 있다는 것을 이번 연구를 통하여 느낄 수 있었다.
李玄燦,洪錫瑢 弘益大學校 科學技術硏究所 1998 科學技術硏究論文集 Vol.9 No.2
The reverse engineering is commonly used in the product design. For the reverse engineering, existing products are digitized for the computer modeling. Using the digitized data, curves and surfaces are modeled for the new products. However, in the digitizing process, measuring errors or deviations can be happened very often. Therefore, it is very important to handle such measuring errors or deviations during the computer modeling. If the errors are ignored, modeling results can be undesirable. To handle the errors, fairing process is performed. In this paper, we investigate curve fairing based on various fairness metrics. Fairness metrics can be discrete or continuous. Discrete metrics are used when a point set is given as an input. On the other hand, continuous metrics are used when curve or surface models are given. In this paper, we adopt continuous metrics and discrete metrics for fairing given NURBS (Non-Uniform Rational B-Spline) curves and given 3D points. The fairness metrics include curvature and torsion. In this paper, automatic fairing process is proposed for fairing given NURBS curves and given 3D point sets for curves. The process uses various fairness criteria so that it is adequate to adopt designers´intents.
李玄燦,洪錫瑢 弘益大學校 科學技術硏究所 1997 科學技術硏究論文集 Vol.8 No.-
Design of surfaces in CAD is very important because surfaces have various applications and implementation of the construction algorithm is difficult. When designers construct surfaces, final configuration of surfaces and construction algorithms depend on input data or design intents. In this paper, input data for constructing surfaces are assumed to be 3-dimensional points. Construction of surfaces by interpolating data points means that the resulting NURBS patch which passes data points is constructed. Because construction of surfaces in this paper is based on NURBS, it is necessary to calculate parameters for data points, knot vector, and control points. NURBS curve formation is similar to NURBS surface formation, thus if curve interpolation algorithm is applied to the surface interpolation process, construction of surface becomes simpler. Sometimes numerical errors occur when we apply the proposed algorithm. The errors increase in proportional to the degree of isoparametric curves' distortion and the number of data points. To improve the quality of the constructed surfaces, it is necessary to refine input data points and use a number of NURBS patches in construction of surfaces. For further improvement of surfaces through refining curvature plot need to be investigated in the future.