http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김상근(Sangkeun Kim),한효섭(Hyoseup Han),한종대(Jongdae Han) 한국트라이볼로지학회 2005 한국트라이볼로지학회 학술대회 Vol.2005 No.6
Polymer lubricant composed of porous structure resin retaining oil or grease provides oil lubrication, but it acts as solid. For synthesis of polymer lubricant, thermo plastics like polyethylene are normally used. Polymer lubricants are synthesized to be adjusted in composition from pure polymer to 60 percent content of oil. And then the internal space of bearing has been filled with polymer lubricant. Under severe operating conditions, bearings are usually damaged by grease deterioration, leakage and insufficient lubrication caused by insertion of water or foreign matters. In these conditions, polymer lubricating bearings which are packed with polymeric lubricant have been widely applied for satisfying maintenance cost and obtaining longer service life. In this work, two polymer lubricants optimized by SSRED (Six Sigma Robust Engineering Design) program using oil separation and OIT (oxidation induction time) values respectively. Then the performance of polymer lubricants for high temperature application was tested and evaluated. The optimized polymer lubricant by means of OIT value showed longer grease life than the optimized polymer lubricant by using oil separation.
최적화 후의 깊은홈 볼 베어링용 그리이스의 특성과 수명연구
김상근(Sangkeun Kim),한효섭(Hyoseup Han),한종대(Jongdae Han) 한국트라이볼로지학회 2005 한국트라이볼로지학회 학술대회 Vol.2005 No.11
Rolling bearings are assorted one of the most important machine elements. High performance characteristics such as long life, low torque, small temperature rise, low noise, low wear and high corrosion resistance are required for rolling bearings. The grease life will effectively limit the bearing life. Therefore higher performance of rolling bearing greases is required to improve bearing lubrication. Large differences in the grease performance depending on the composition were observed. In this study, five optimum greases with different composition were selected using the powerful Robust Engineering Orthogonal Array and SSRED (Six Sigma Robust Engineering Design) program. Then the performance of these optimum greases was tested. Large differences in the grease performance depending on the composition were observed. A strong correlation was found between grease life and OIT value The life time of optimum grease using OIT value was longer than that of the optimum grease using dropping point.
볼 베어링과 형상오차를 갖는 하우징의 끼워 맞춤에 따른 베어링 진동 및 피로 수명의 영향
이영근(Lee, Young-Keun),이석훈(Lee, Seok-Hoon),정일권(Jung, Il-Kwon),차철환(Cha, Cheol-Hwan),한효섭(Han, Hyo-Seup) 한국소음진동공학회 2006 한국소음진동공학회 논문집 Vol.16 No.5
It is known that ball bearings mounted in housing or on shaft are playing a key role to keep it running smoothly. The roundness of a housing bore on which bearing outer ring is mounted with interference has directly affected the running accuracy of bearing. The running accuracy of bearing, therefore, can extend the significant influence to the rotating machinery as well. In this paper, bearing's vibration and fatigue life considering raceway roundness of ball bearing before and after mounted in housing bore are theoretically estimated. To perform analysis, a simple three degrees of freedom model was proposed and then Newton-Raphson iterative method was introduced to be utilized in the analysis. The results show that the vibration magnitude of ball bearing fitted into housing unit is appeared considerably larger than the one of its pre-assembling. And theoretical $L_{10}$ life which ninety percent of the bearing population will endure decreased in about fifty percent.