http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
한두희 한국산학기술학회 2003 한국산학기술학회 학술대회 Vol.- No.-
일반적으로 액비 탱크 등은 콘크리트를 이용하여 지하에 시공하므로 빗물 등이 흘러 들어가기 쉽고, 습기 등에 의하여 콘크리트가 부식되기 쉬우며 이로 인하여 오폐수가 지하로 스며들어 지하수를 오염시킬 수 있다. 이를 해결하기 이하여 액비탱크를 법랑을 이용하여 지상에 건설하여 침출수를 원천적으로 방지하고 미려한 색상으로 인한 자연 친화적인 저장 장치를 활용하여, 지하에 일시 저장한 분뇨를 펌프를 사용하여 지상으로 끌어 올려 속성 발효시키면 우수한 액비를 생산 활용할 수 있다.
한두희,신준수,강정석,박정신,박선상,곽재수,성홍계,최호진 대한기계학회 2014 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.28 No.10
Mixing characteristics in a rectangular chamber are investigated using experimental and numerical methods. A mixing chamber withan axial inlet (representing fuel inlet) and a side inlet (representing air inlet) is designed. Two jets with different momentum ratiosthrough the two inlets are mixed in the chamber. Computational fluid dynamic simulation is validated by experimental data of particleimage velocimetry that measures flow velocity distribution. The momentum ratios of the two jets and the height of the axial inlet significantlyinfluence the penetration depth of axial jet into the mixing chamber and the pressure drops at recirculation zones.
음식물 쓰레기 발효가 제작을 위한 원적외선 가열장치 설계의 물리학적 접근
한두희 한국산학기술학회 2002 한국산학기술학회논문지 Vol.3 No.2
지하수의 오염을 막기 위하여 음식물의 매립은 법적 제제를 받는다. 따라서 음식물을 퇴비나 사료로 사용할 수 있는 시스템을 갖추는 것이 바람직하다. 이러한 필요에 따라 음식물 쓰레기 처리용 원적외선 가열기를 법랑 및 전열선을 사용하여 설계하였고, 가열의 효과를 돕기 위한 원적외선 발열 교반기도 설계하였다. 또한 물을 많이 포항하고 있는 음식물 쓰레 기의 발효에 알맞은 발열체의 온도가 190℃ 부근임과 원적외선 발열체의 원적외선 방사효율을 조사한 결과 흑색의 법랑이 적절함을 확인하였다. The reclamation of food waste is brought by law in order to clean the underground water. Thus the food waste feed back system should be prepared. The electric heater and mixing tool for FIR radiation were developed in order to control the food waste fermentation. Also we suggest the optimum temperature 190℃, black enamel ware for food waste control.
프리트, 점토 및 안료와 혼합에 따른 법랑 색상에 관한 연구
한두희,이정화 한국산학기술학회 2002 한국산학기술학회논문지 Vol.3 No.2
법랑 재료인 프리트, 점토 및 안료의 배합비를 달리하여 법랑 시편을 제작하고, 시료들의 색상을 측색계(JS555)를 이용하여 분석하였다. 법랑의 색상 분석은 안료 외에도 프리트의 성질에 크게 좌우되며, 소성 전후의 법랑의 색깔이 확연히 변하므로 생산 표준화를 위하여 필요한 작업이다. Samples of enamel wear for kitchen works were made at the Kordco Enamel Co. We analyzed the colors of enamel wears with Color Meter (JS555). The colors of enamel wears could be controled by mixing ratio of frits and pigments. Many kinds of frits and pigments were tested, and colors of enamel wears could be changed by variable frits. Colors were weakly changed by several mixing ratio of pigments.
양면 코팅 시스템 갖춘 대형 증착기에 의한 다층 반사방지막의 생산성 및 품질 향상
한두희 한국산학기술학회 2000 한국산학기술학회논문지 Vol.1 No.1
대형 진공증착기내에 대형 피코팅물 고정대를 방사형으로 배치고 대용량의 피코팅물이 균일하게 코팅되도록 공전과 자전을 병행하도록 하여, 1회 진공으로 피코팅물의 양변을 동시에 코팅하므로 증착시간을 절역하고 전력소비를 줄일 수 있으며 대기중 이물질에 의한 오염방치를 할 수 있었다. 내부에 이중 전자빔을 설치하여 자동 다층막 증착이 가능하며, 유효증착면적을 크게할 수 있었다. 이런 장치를 이용하여 증착 시간의 30% 단축, 작업 생산성 50% 향상과 아울러 증착막의 전도막 특성도 향상되었으며 증착막의 균일도도 향상되었다. 증착막의 광학적 특성인 반사벙지 투과율 특성도 향상되었다. Auto DOME-reversing system had been installed in a vacuum coating chamber which decreased the coating time. the electric energy spending and the contamination by rotating and revilving substance. Auto multi coating with dual electron beam was accomplished and effective coating area was increased. The coating duration was decreased with 30%, the production efficiency were increased with 50%. Also the surface conductivity, the coated film uniformity and anti-reflection capablity were also improved.
기동표적의 상태추정을 이용한 포의 사격통제 시스템 향상 연구
한두희,이동관,송택렬 대한전기학회 2006 전기학회논문지 D Vol.55 No.3(D)
- Fire control system(FCS) errors can be classified as hardware errors, filter prediction errors, effective ballistic function errors, and aiming errors. Among these errors, the filter prediction errors are the most significant error sources. To reduce them, a target future position calculation method using the acceleration estimate is suggested and it is compared with the constant velocity target prediction method. Simulation results show that the suggested method has better performance than the constant velocity prediction method. Target tracking algorithm is established with multiple target tracking filters based on IMM structure. 볼 때, 기존의 Singer 모델을 적용한 단수모델 필터의 추정치와 필터 상태천이행렬을 이용한 예측모델을 사용하는 사격통제장치의 성능은 가속도 공분산 값에 따라서 성능에 큰 차이를 보이게 되는데, 그 이유는 가속도 공분산 값이 표적의 기동을 고려하여 크게 설정되었을 경우는 등속 표적에 대한 추정성능이 좋지 않아 CPA가 증가하게 되며, 작은 가속도 공분산 값은 등속 표적에 대해 추정 성능이 좋기 때문에 양호한 CPA성능을 보여주지만 표적의 기동이 검출되면 추정 오차가 급격히 커지면서 결국 CPA값도 증가하게 되는 단점이 있다. 그러나 IMM을 사용할 경우 표적의 등속과 기동 구간에서 추정성능이 우수하며, 특히 표적의 기동이 있어도 표적의 가속도를 고려한 combination 예측 모델이 양호한 성능을 보임을 알 수 있다.표 5는 탄의 적중도에 대한 100번 몬테칼로 시뮬레이션 결과이다.
한국 이비인후과에서 안면성형 및 재건술의 관심도에 관한 연구
한두희,박민현,진홍률 대한이비인후과학회 2007 대한이비인후과학회지 두경부외과학 Vol.50 No.4
Background and Objectives:To assess the interest of Korean otorhinolaryngologists in facial plastic and reconstructive sur-gery (FPRS). Subjects and Method:We performed a 15-question survey about the experience and interest in FPRS among Korean otorhinolaryngologists. The response rate was 23% ( :34%, private practice:14% ). Results:In most respondents, the proportion of FPRS in their practice was less than 25%. Rhinoplasty was the most commonly performed procedure among FPRS folowed by otoplasty and blepharoplasty. Ninety-four percent of respondents reg-arded their training in FPRS as insuficient and 38% had taken supplementary courses for the FPRS. Forty percent responded that FPRS should be taught during and after residency training. Finally, 89% of all respondents responded that FPRS should be part of the field of otorhinolaryngology, and 71% responded th -gologic society. Conclusion:There is an interest in integrating FPRS training into the Korean otorhinolaryngology residency training program. (Korean J Otolaryngol 2007 ;50 :305-9)