RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        시멘트 바이패스 더스트 내 염화칼륨 수득을 위한 이산화탄소 적용 연구

        김경석,추용식,Kim, Kyoungseok,Chu, Yongsik 한국자원리싸이클링학회 2017 資源 리싸이클링 Vol.26 No.6

        시멘트 제조 공정에서 발생하는 바이패스 더스트는 지정폐기물로서 고가의 처리비용이 요구되고 있다. 바이패스 더스트의 주성분은 KCl이며, KCl은 주로 비료에 사용되고 있다. 비료에 사용하기 위해서는 pH 수준이 중성 혹은 약산성 이어야 한다. 그러나 바이패스 더스트의 pH는 12.0~12.5 수준으로, 또다른 전처리 없이 비료로 사용될 수 없다. 본 연구에서는 시멘트 바이패스 더스트에서 KCl을 수득하는 과정 중, 이산화탄소를 사용하여 산화칼슘을 제거하고, 동시에 pH 변화량을 제어하고자 하였다. 탄산화시험기 내부 분위기를 $25^{\circ}C$-50RH%로 고정한 후, 이산화탄소 20 vol% 조건에서 0~7시간으로 유지하고, 각 시간별 산화칼슘 함량 및 pH 값을 분석하였다. 이산화탄소 유지시간 증가에 따라 산화칼슘 함량 및 pH 값은 감소하였으며, 6시간 경과 후 pH 값은 7에 근접하였다. As by-pass dust (BPD) made from cement manufactured process is designated waste, it is required to bury as high cost. The main component of BPD is potassium chloride (KCl), and used for the fertilizer. For using KCl to the fertilizer, the pH value of KCl is required as neutral or weak acid. However, it is not suitable to apply BPD into the fertilizer directly without any other treatment because BPD's pH value is shown 12.0~12.5; a high base. In this study, the carbon dioxide ($CO_2$) was used for removing calcium oxide (CaO) and reducing pH value during manufacturing process of KCl. We fixed inner condition of the carbon test chamber as $25^{\circ}C$-50RH%, and retained 0~7 hours under the 20 vol% of $CO_2$ atmosphere. After experiment, we analyzed the content of CaO and pH value from each samples. The more time exposed to $CO_2$, the content of CaO and pH value are shown. Furthermore, pH value exposed in 6 hours nearly reached 7.

      • KCI등재

        폐유리와 산화 그래핀을 사용한 시멘트 모르타르의 물성 연구

        김경석,추용식,Kim, Kyoungseok,Chu, Yongsik 한국자원리싸이클링학회 2019 資源 리싸이클링 Vol.28 No.6

        This study investigated on the compressive strength and the length change test with using the waste glass and graphene oxide for recycling the waste glass as the aggregate. Curing on 3-day and 7-day, the compressive strength was enhanced as the usage of waste glass was increased. Especially, the huge difference in the compressive strength was observed when the amount of substituting on the waste glass was used on 10~50%. With 50% of waste glass condition, the compressive strength was portionally enhanced as the usage of graphene oxide was increased and its value was 42.6 N/㎟ with 0.2% of graphene oxide. In terms of the length change test, the use of high content of waste glass led length change value to increase, but it was dropped down as the portion of waste glass was above 50%. Furthermore, in the case of using 50% of waste glass, the use of high amount of graphene oxide tended to decrease the length change value. That is, graphene oxide may contribute on boosting the cement hydration reaction and blocking the ion's movement.

      • KCI등재

        시멘트 바이패스 더스트에 존재하는 염화칼륨의 용해 및 수득 특성

        윤영민,정재현,추용식,Yun, Youngmin,Jeong, Jaehyun,Chu, Yongsik 한국자원리싸이클링학회 2016 資源 리싸이클링 Vol.25 No.3

        시멘트 공장에서는 폐기물 재활용 측면에서 다양한 산업부산물 및 생활폐기물을 사용한다. 이들 폐기물에는 다량의 칼륨과 염소 및 소량의 중금속 등도 함유되어 있으며, 이들 성분을 유가자원으로 활용하기 위한 다양한 시도가 이루어지고 있다. 본 연구에서는 칼륨과 염소를 용해 결정화하여 염화칼륨을 수득하기 위한 다양한 방안을 검토하였다. 특히 혼합수 함량, 슬러리 온도 및 교반시간 등을 제어하였다. 또한 수득 염화칼륨 중에 존재하는 중금속 종류 함량 등도 분석하였다. 염화칼륨 수득량은 혼합수 함량 증가에 따라 증가하였으나, 1 : 2 (더스트:혼합수) 이상에서는 소폭 증가하였다. 슬러리 온도에 따른 수득량은 일정온도 이상에서 증가하는 경향을 나타내었으며, 교반시간 10분 이상에서는 수득량 변화가 관찰되지 않았다. 교반시간 증가에 따라 수득된 염화칼륨의 중금속 종류 함량도 다양하였으며, 주요 중금속은 Pb, Cu 및 $Cr^{6+}$ 등으로 확인되었다. Cement manufacturing plant uses various kinds of industrial/municipal waste. The waste contains considerable amount of potassium, chlorine and small amount of heavy metal. Many researches were performed to fabricate valuable resources from the waste. In this study, various methods, which dissolves and crystallizes potassium/chlorine to extract potassium chloride, were experimented. Especially amount of water, slurry temperature, and stirring time were controlled. Then kind of heavy metal and content of potassium chloride were analyzed. The yield of potassium chloride increased, as the amount of water for slurry increased but it increased slightly, when the water content was over 200%. The yield tended to increase, when the temperature of slurry was over a certain point. The yield did not increase in case of over 10 minutes stirring time. The kind and content of heavy metal in potassium chloride were various according to stirring time. The main heavy metals were Pb, Cu, and $Cr^{6+}$.

      • 침투성 함침제에 따른 콘크리트 표층부의 개질특성

        송훈 ( Hun Song ),신현욱 ( Hyeonuk Shin ),추용식 ( Yongsik Chu ),이종규 ( Jongkyu Lee ) 한국건축시공학회 2013 한국건축시공학회 학술발표대회 논문집 Vol.13 No.2

        This study is interested in manufacturing the concrete surface impregnants including tetra ethyl ortho silicate, alkali silicate for the repair of the exposed concrete and the color concrete requiring the advanced function in view of the concrete appearance. The surface layer change and porosity properties was tested for the review of application. The result of this study show that the effective silicate are tetra ethyl ortho silicate and alkali silicate t. The adhesion in tension is slightly increased but the reinforcement of concrete substrate is slight. So, the concrete impregnant of this study is more desirable for the improvement of durability rather than the reinforcement.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼