http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
최문환,강영흥,조평동,양준규,이상무,Choi, Mun-Hwan,Kang, Young-Heung,Cho, Pyoung-Dong,Yang, Jun-Kyu,Lee, Sang-Mu 한국정보통신학회 2007 한국정보통신학회논문지 Vol.11 No.9
본 논문에서는 광케이블을 사용하는 구내선로설비 의 설계 시 배관의 구조와 광케이블의 특성에 대한 영향을 분석하기 위해 모의시험을 행하였다. 특히 광케이블의 포설 시 발생하는 굴곡개소에 따른 광신호의 손실 특성 및 다양한 형태의 광케이블에 대하여 밴딩(bending)으로 인한 곡률반경에 따른 손실 특성을 분석하였다. 굴곡개소의 개수에 따른 광신호의 손실 특성 실험의 결과, 모두 현행 기준에 만족하는 것으로 나타났으며, 케이블 밴딩에 의한 곡률반경에 따른 손실 특성 실험에서는 모든 케이블의 밴딩 곡률 반경이 현행 허용 곡률 반경(30mm)을 만족하였다. 뿐만 아니라 허용 곡률 기준 이하의 곡률 반경에서도 신호의 감쇠가 발생하지 않아 현행 허용 곡률 반경 기준의 개정해야할 필요성이 제기되었다. 본 논문의 결과는 구내 선로설비 기술기준 재 개정을 위한 자료로 제공될 것이며, 향후 광가입자망(FTTH)의 도입을 위한 배관의 요구조건 수립에 활용하고자 한다. In this paper, we have carried out some tests for analyzing the effects of optical fiber characteristics and piping structures in designing a Customer Cabling System with optical fibers. In this tests, the loss characteristics due to the number of curvatures and the radius of curvature with bending to establish an optical fiber have analyzed particularly. We can confirm that the test results satisfy the current technical regulations in both cases of the number of curvatures and the radius of curvatures. Also, in particular, since there is no loss in an optical cable under the current radius of curvature, that is 30mm, the radius criteria of curvature needs to be revised. These tests results will be so useful to revise and establish a customer cabling system for FTTH.
최문환(Mun-Hwan Choi),조평동(Pyoung-Dong Cho),강영흥(Young-Heung Kang),양준규(Jun-Kyu Yang) 한국통신학회 2008 韓國通信學會論文誌 Vol.33 No.7C
본 논문은 FTTH 도입에 대비하여 현행 국내 광가입자망 구축 공법 및 케이블 포설 등에 관련된 기술기준의 개정 사항 도출을 위하여 광케이블의 곡률 반경과 밴딩 횟수의 변화에 따른 광케이블 채널 손실 특성 및 이종 모드간 광케이블 접속 시 발생하는 채널 손실 특성을 시험 측정하였다. 곡률 반경 및 밴딩 횟수의 변화에 따른 시험 측정 결과 30㎜의 현행 허용 곡률 반경 기준을 보다 완화하여도 채널 손실 기준을 만족하는 것으로 나타났으며, 이종 모드간 케이블 접속 시험 측정에서는 다중 모드로부터 단일모드로의 접속 시 원활한 정보 전달이 불가능 한 것으로 나타나 향후 이종 모드간 광케이블 접속 규격에 대한 보다 심도 있는 연구가 요구되고 있다. In this paper, we have analysed the channel loss characteristics of optical fiber due to the changing of radius of curvatures and the number of cable banding, and due to the connection between different modes of fiber to derive revisions of technical regulation for FTTH. The results of test show that all conditions are satisfied the criteria(allowable radius of curvatures, 30㎜) with the exception of conditions of 10mm radius in single mode case and show that source of light in multi mode fiber can't be delivered to single mode fiber. henceforth, we should study more intensively on the standards of connection between cables in the different modes.