http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Nylon 6 Film의 결정화도가 응력 완화거동에 미치는 영향
조대현,장동호,안재수,Jo, Dae-Hyeon,Jang, Dong-Ho,An, Jae-Su 한국섬유공학회 1990 한국섬유공학회지 Vol.27 No.1
The stress-relaxation behaviour of uniaxially drawn nylon 6 films was studied under with various crystallinty and varous initial strain at temperature range from 248K or 298K. In case of the same crystallinity, the change of stress-relaxation moduli of small strain was faster than that large. The absolute value of stress-relaxation modulus increased with the increase of crystallinity and the slope of stress-relaxation curves of small crystallinity was faster than that of large. The apparent activation energy of stress-relaxation increased with the increase of crystallinity.
조대현,김철환,최진호,Jo, Dae-Hyeon,Kim, Cheol-Hwan,Choi, Jin-Ho 한국복합재료학회 2017 Composites research Vol.30 No.4
Generally, joints are the weakest part in the composite structures. Composite joints can be classified into adhesive joints and mechanical joints, and mechanical joints are mainly used in areas less sensitive to environmental conditions. In this paper, the failure loads of composite mechanical joints with five different stacking angles are tested and predicted. Finite element analysis of mechanical joints were performed and failure loads were predicted by the FAI(Failure Area Index) method using Tsai-Wu and Yamada-Sun failure criteria, and the predicted failure loads were compared with experimental results. From the experiment and analysis, the failure loads of the mechanical joints were decreased as the ratio of 0 degree layer was low and they could be predicted within 13.03% using the FAI method and Yamada-Sun failure criteria. 일반적인 복합재료 구조물에서 체결부는 가장 취약한 부분이다. 복합재 체결법은 접착 조인트와 기계적 조인트로 크게 나눌 수 있으나, 환경조건에 덜 민감한 부분에는 주로 기계적 조인트가 많이 사용되고 있다. 본 논문에서는 5가지의 적층각 변화를 가지는 복합재료 기계적 조인트의 파손하중을 실험하고 예측하였다. 기계적 조인트에 대한 유한요소 해석을 수행하고 Tsai-Wu와 Yamada-Sun 파손이론을 이용하여 파괴면적지수법(FAI)으로 파손강도를 예측하였으며, 이를 실험 결과와 상호 비교하였다. 실험과 해석결과, 복합재 기계적 체결부는 0도 층의 비율이 낮을수록 파손하중이 저하되었으며, 파괴면적지수법과 Yamada-Sun 파손식으로 13.03% 오차범위 내에서 파손하중을 예측할 수 있었다.