http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
단층래티스 돔의 주부재 단면형상에 따른 좌굴특성 검토 (KS규격 기성 강재 사용을 기준으로 함)
정환목,Jung, Hwan-Mok 한국공간구조학회 2013 한국공간구조학회지 Vol.13 No.4
The circular hollow section is usually used for member of main frame to carry the external load in single layer lattice dome. But, the H-shaped section may be used for member of main frame since it is convenient for attaching roof panels. Single layer lattice domes have various buckling characteristics, such as the overall buckling, the member buckling, and nodal buckling. The purpose of this study is to compare buckling characteristics of single-layer lattice domes in which the H-shaped steel section as the existing domestically-produced structural steel is used as main frames to those of domes in which a circular hollow section is used as main frames.
단층 래티스 돔의 Erection 중 거동 및 좌굴 특성
정환목,김철환,황동규,Jung, Hwan-Mok,Kim, Cheol-Hwan,Hwang, Dong-Gyu 한국공간구조학회 2008 한국공간구조학회지 Vol.8 No.3
단층 래티스 돔은 경량이면서도 높은 강성을 가지므로 대공간 구조물로서 유리하며, 이 구조물은 기둥 없이 널은 공간을 확보해야하는 구조적 특성으로 인하여 시공시 불안정 현상이 발생할 수 있다. 현재 국내에서 대공간 지붕구조물의 설치 방법으로 가장 많이 도입되고 있는 Erection공법은 Block공법이며, 이 공법은 지상에서 조립한 대공간 지붕 골조를 크레인 등으로 소정의 위치까지 들어 올려 지붕구조를 완성해 가는 설치 공법이다. Block 공법에 있어서 인양할 포인트를 선정하는 작업은 대단히 중요하다. 즉, 인양 시 골조의 변형과 좌굴 등에 대해서 가장 안전하고 경제적인 절점을 인양 포인트로 선정할 필요가 있다. 따라서 본 연구에서는 가장 안전하고 경제적인 Erection을 위한 기초자료를 얻기 위하여 삼각형 네트워크를 갖는 단층 래티스 돔의 Erection 시 인양 포인트에 따른 구조물의 거동 및 좌굴 특성을 연구하는데 그 목적이 있다. 얻어진 결론은 1) 돔의 높이 H가 작을수록 인양위치에 따른 좌굴내력의 영향이 큰 것을 알 수 있었으며, 반대로 돔의 높이 H가 클수록 인양위치에 따른 좌굴내력의 영향은 미미한 것을 알 수 있었다. 2) 인양 위치에 관계없이 인양로프 길이에 따른 좌굴내력의 영향은 크지 않은 것을 알 수 있었다. A single layer-latticed dome is advantageous for large span structures because it is very stiff despite the light weight of the structure itself. However, this structure becomes easily unstable during erection due to its large size. The Block method is popular with the large span structures. A partial block of the dome is fabricated on the ground and lifted by crane to a designated location of structures. The lifting point selection is very important to create a stable erection and to avoid buckling of members during the erection. The purpose of this study is to analyze the structural behaviors and buckling characteristics according to the lifting point of single-layer latticed domes with triangle network in order to take materials about the safe and economic erection. The conclusions are obtained as follow. 1) The buckling strength of the block part varies with the location of lifting points when it is erected. In case, the height of the dome is lower, the effort of buckling strength of the structure is higher. 2) In buckling strength, the effect of the lifting rope length is smaller than it of the lifting points change.
사각형네트워크 단층래티스돔의 좌굴특성 -실험과 이론과의 비교-
정환목,Jung, Hwan Mok 한국강구조학회 1998 韓國鋼構造學會 論文集 Vol.10 No.3
본 논문의 목적은 4각형네트워크 패턴을 가지는 단층래티스돔의 좌굴특성을 실험과 이론을 통하여 검토하고, 나아가 4각형 네트워크 단층돔에 대한 신뢰할 수 있는 이론해석법을 개발하기 위한 기초연구를 하는데 그 목적이 있다. 이론해석은 야마다의 연속체치환법과 유한요소법에 의한 프레임해석법으로 한다. 원주방향에 대한 불균일한 강성과 지붕재료의 강성이 돔전체 좌굴특성에 미치는 영향을 검토한다. 이론과 실험에 의한 결과는 불균일한 강성을 가지거나 또는 강성을 갖는 지붕재료를 사용하는 다양한 종류의 단층래티스돔에 대한 일반적인 이론해석법을 개발하기 위한 기초자료로 활용될 것이다. The purpose of this paper is to analyze the buckling characteristics of rigidly-jointed single-layer latticed domes with square network by using the experimental and the theoretical techniques in order to develop a reasonable method of theoretical analysis for these domes. Two methods of theoretical analysis are applied; one is based on the Yamada's method of shell analogy and the other is based on the frame analysis method using the finite element method. The effects of the nonuniformity of rigidity-distribution in the circumferential direction and the rigidity of the covering material on both the prebuckling and the buckling characteristics are examined. The results indicate that these effects should be considered reasonably in the theoretical analyses.
인천공항 제2터미널 에너지코어 단층 스페이스 프레임 구조물의 안정에 관한 연구
정환목,Jung, Hwan-Mok 한국공간구조학회 2015 한국공간구조학회지 Vol.15 No.4
The roof grid of single-layer space frame structure, for Energy Core of Incheon Airport Second Terminal, is very simple and aesthetic, but it is apt to buckle under external force because of mild curvature and complex shape. The object of this study is to estimate the stability of single-layer space frame structures for Energy Core of Incheon Airport Second Terminal with the analytical conditions of structural design. The results show that the buckling load of model(pin-pin, uniform load, rigid joint), that is, the most similar model to the analytical conditions of structural design. was $10.7kN/m^2$.
정환목,우재원,조병욱,이성연 한국공간구조학회 2008 한국공간구조학회지 Vol.8 No.6
본 연구는 막구조물의 장력 측정을 위한 휴대용 막장력측정기기의 개발을 목적으로 한다. 2축시험기에 장착된 막의 장력을 간이 측정기에 의해 측정하여 구한 실험 데이터를 근거로 효율적인 2축방향 막 장력측정기기를 개발하는데 그 목적이 있다. 연구결과 개발된 휴대용 간이 장력측정기기는 정량적이고 정성적인 측면에서 데이터의 정밀도가 매우 높아 향후 상용제픔으로도 개발이 가능함을 알 수 있었다. This paper is concerned with the development of a measurement system using field measuring device which will give the membrane stress of the membrane structures. Up to this point, several techniques on measurement of membrane stresses has been proposed and some have been used in the fields, but accuracy of the measured stresses to be far from reliable one. Such situation has not been changed until recent days, we do not have the measurement device on which we can depend. On top of that, due to the different properties in cross directions for material of the membrane, the stress in the warp direction is different from that in the fill one.