http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Aluminum / Steel 이종소재 접합의 모재강도 및 두께별 SPR 접합성에 관한 연구
정택언(Taek-Eon Jeong),김민규(Min-Gyu Kim),이세헌(Sehun Rhee),감동혁(Dong-Hyuck Kam) 대한용접·접합학회 2019 대한용접·접합학회지 Vol.37 No.3
Dissimilar joining of aluminum and steel is one of the fundamental techniques for achieving weight reduction in the automotive industry. Self-piercing rivets have been widely adopted for the aluminum-steel lap joint because of its simplicity and high joining strength. In this study, the joining quality of the aluminum-steel joint produced by self-piercing rivets is investigated depending on the strength and thickness of the aluminum sheet. Four different tensile strengths (228, 305, 320, and 326 MPa) of aluminum are considered in this study, which corresponds to Al5052-H32, Al5754-H18, Al5083-H32 and Al6061-T6. For the thickness variation test, Al5052-H32 sheets with a thickness of 1.2, 1.5, 2.0, 2.5 mm are used. The SPR joint quality was quantified with cross-sectional visual analysis and tensile lap shear test. In aluminum(top)-steel (bottom) SPR joint, it was observed that the joint load increased with increasing aluminum strength up to 320 MPa. Nevertheless, the thickness of top aluminum was found to not affect the joint strength between the thickness of 1.5 ~ 2.5 mm. In steel(top)-aluminum(bottom) SPR joint, it was found that joint strength did not change with aluminum strength but increased with increasing aluminum thickness.