경주, 포항, 울산지역 보건.환경성 질환 위해 인자

정종현,최봉욱,문기내,석성자,김현규,손병현,Jung, Jong-Hyeon,Choi, Bong-Wook,Moon, Ki-Nai,Seok, Seong-Ja,Kim, Hyun-Gyu,Shon, Byung-Hyun 한국환경보건학회 2010 한국환경보건학회지 Vol.36 No.2

This study was undertaken in an attempt to provide scientific grounds in explaining the causes of environmental and respiratory diseases resulting from air pollutants in Gyeongju and its neighboring areas. In relation to heavy metals, lead (Pb) was $0.0135{\sim}0.1744\;{\mu}g/m^3$ and high in order of Pohang, Ulsan, and Gyeongju while nickel (Ni) was $0.0023{\sim}0.0115\;{\mu}g/m^3$. The concentrations of heavy metals in the investigated areas did not exceed the environmental standards or Guideline Value of Korea or other countries. However, it is considered necessary to apply intensive control to some heavy metals including cadmium (Cd) that show a relatively high level of hazard. Based on the responses to the survey, measured personal interest in environmental pollution and the basic knowledge of the causes of the respiratory diseases was higher in those with a family history of allergic reactions to metals and bronchial asthma. The incidence of allergic disease was higher in those who are currently in poor health state. In addition, the general knowledge of environmental pollutants was higher in those with higher educational level and those with a higher interest in environmental pollution. Personal interest in environmental pollution was higher in those with higher basic knowledge of environmental pollutants. Therefore, it is necessary to increase the awareness through better education and campaigns on environmental pollution.

경주권역으로의 대기오염물질 유입현황과 석조문화재에 미치는 영향

정종현,손병현,김현규,최원준,남철현,Jung, Jong-Hyeon,Shon, Byung-Hyun,Kim, Hyun-Gyu,Choi, Won-Joon,Nam, Chul-Hyun 한국환경보건학회 2005 한국환경보건학회지 Vol.31 No.5

In this study, we focused on the geographical and the meterological conditions, the atmospheric examination, the soil contents and compositions in order to establish cultural properties conservation plan in Gyeongju and its surroundings. Also, the transport route with environmental contaminants in Ulsan and Pohang was examined. The results could be summarized as follows ; Air pollutant and environmental contaminant was transported by two types of winds. One is induced by local winds, the other is induced by synoptic winds. Air contaminant transported from coastal regions to inland regions were associated with wind velocity. Gyeongju had good atmospheric conditions, i.e. $SO_2\;0.009{\sim}0.011ppm,\;CO\;0.6{\sim}0.8ppm,\;NO_2\;0.015{\sim}0.020ppm,\;O_3\;0.017{\sim}0.032ppm,\;PM_{10}\;46{\sim}62{\mu}g/m^3\;and\;Pb\;0.034{\sim}0.060{\mu}g/m^3$, which was below environmental air qualify standards and was little lower than those of Pohang and Ulsan. However, Ulsan and Pohang city are located on south-east coast and have many industrial facilities. Hence, air pollution problems become serious issues in Ulsan, Pohang, Busan, Daegu and other cities due to the emission of air pollutants from the various industrial facilities, incinerator and power plants, etc. The soil of Gyeongju had heavy metals conditions, i.e. $Cd\;0.01{\sim}0.08mg/kg,\;Cu\;N.D{\sim}2.39mg/kg,\;As\;N.D{\sim}0.07mg/kg,\;Hg\;N.D{\sim}0.15mg/kg,\;Pb\;0.49{\sim}1.39mg/kg,\;Cr^{+6}\;0.02{\sim}0.42mg/kg,\;Fe\;0.74{\sim}1.55mg/kg,\;Mn\;0.11{\sim}0.49mg/kg\;and\;Zn\;1.11{\sim}3.56mg/kg$. However, pH value of soil had range of $4.12{\sim}7.45$. The results showed that high pH concentration of soil could occur due to air pollution diffusion and environmental contaminant transport at Ulsan and Pohang city.

울산 지역 학교의 휘발성유기화합물 평가

정종현,이사우,피영규,Jung, Jong-Hyeon,Lee, Sa-Woo,Phee, Young-Gyu 한국학교보건학회 2012 韓國學校保健學會誌 Vol.25 No.1

Purpose: The purpose of this study was to investigate the concentrations of volatile organic compounds at elementary, middle, and high schools in Ulsan and its surroundings. Methods: To assess the hazardous chemicals of the 66 classrooms in the 22 schools, the 6 volatile organic compounds such as TVOCs (Total Volatile Organic Compounds), benzene, toluene, xylene, ethyl benzene and stylene were measured and analyzed from the beginning of May to the end of December, 2009. Results: The mean concentrations of TVOCs in the elementary schools were higher than those of middle and high schools, and multi-purpose classrooms was higher than that in general ones. The benzene and toluene level in schools in Dong-Gu in the vicinity of assorted industrial complexes was higher than that of schools located in other districts around the Ulsan Metropolitan Area. Conclusion: In case of schools in Ulsan Metropolitan Area, elementary school, schools in Dong-Gu, and multipurpose classrooms over general classrooms should be given a high priority for the management of volatile organic compounds.

울산지역 학교의 실내공기질 평가

정종현,서보순,주동진,박만철,손병현,피영규,Jung, Jong-Hyeon,Seo, Bo-Sun,Ju, Dong-Jin,Park, Man-Chul,Shon, Byung-Hyun,Phee, Young-Gyu 한국환경보건학회 2010 한국환경보건학회지 Vol.36 No.6

The purpose of this study was to investigate the concentration of indoor air pollutants at 63 elementary schools, 41 middle schools and 51 high schools in Ulsan from the beginning of May to the end of December, 2008. To assess the indoor air quality of the various classrooms, the 8 indoor air pollutants such as $CO_2$, CO, $NO_2$, $O_3$, $PM_{10}$, TVOCs, HCHO and TBC were measured and analyzed. The mean concentrations of $PM_{10}$ and TBC in the elementary schools were significantly higher than those of middle and high schools (p < 0.01). For the HCHO, the multi-use practice rooms showed an average 1.5 times higher than general classrooms. In schools located in urban areas, the concentrations of CO, $O_3$, $PM_{10}$, HCHO and TBC were lower than in the vicinity of industrial complexes. The exceeding rate of the school air quality maintenance limits in the 6 air pollutants by law were 6.7%, 3.5%, 1.7%, 18.2%, 13.0% and 18.4% for $CO_2$, $NO_2$, $O_3$, $PM_{10}$, HCHO and TBC, respectively. Based on these results $PM_{10}$ and TBC have to be in the order of priority of need to improve the classroom air quality in elementary school of Ulsan.

해수와 대기오염물질이 석조문화재에 미치는 영향: 감은사지 삼층석탑을 중심으로

정종현,손병현,정민호,임헌호,김경원,김현규,Jung, Jong-Hyeon,Shon, Byung-Hyun,Jung, Min-Ho,Leem, Heon-Ho,Kim, Kyung-Won,Kim, Hyun-Gyu 한국환경보건학회 2007 한국환경보건학회지 Vol.33 No.4

The effect of seawater and air pollutants on the three-story stone pagodas on Gameunsa Temple Site have been studied in order to establish conservation basic plan. Also, an experimental study has been conducted to evaluate the effect of seawater salt and air pollutants on the weathering of granite. The results could be summarized as follows. Because the three-story stone pagodas on Gameunsa Temple Site are located outdoors, the external appearance has been largely deteriorated due to natural and artificial factors such as typhoon, wind, microorganisms, moisture, extreme change in temperature, air pollutants, and seawater, etc. When G.J fresh granite was dipped into the seawater, dissolution rate of three minerals (Mg, Ca, and K) are increased linearly until about 40 days and then increased abruptly. After seawater dipping experiments, the mineral compositions of the granite surface were lower then that of the G.J fresh granite but Poisson's ratio and absorption ratio were slightly increased. Therefore, from these results we can say that stone cultural properties could be weathered by seawater and air pollutants and it's considered being a meaningful experiment to study the conservation method of stone cultural properties from seawater.

경주지역 석조문화재 풍화에 미치는 대기오염물질의 영향

정종현(Jung, Jong-Hyeon),정민호(Jung, Min-Ho),최원준(Choi, Won-Joon),서정호(Seo, Jung-Ho),황인조(Hwang, In-Jo),손병현(Shon Byung-Hyun) 한국산학기술학회 2010 한국산학기술학회논문지 Vol.11 No.2

경주시의 1∼3종에 해당하는 고정배출원에서 배출되는 오염물질 배출량은 PM-10 0.70 ton/yr, SO₂ 13.95 ton/yr, NOx 37.12 ton/yr로 조사되었고, 면오염원의 경우 PM-10 1.02 ton/yr, SO₂ 13.44 ton/yr, NOx 21.10 ton/yr로 나타났다. 또한 이동오염원의 오염물질 배출량은 PM-10 963.91 ton/yr, SO₂ 1415.02 ton/yr, NOx 5612.70 ton/yr로 조사되었다. 경주, 포항 및 주변지역의 대기 중 PM-10, SO₂ 및 NO₂의 농도분포를 확인한 결과, 고농도 지역은 주로 포항철강공단 및 이동오염원 주변이었다. 경주지역의 SO₂ 농도는 2006년 0.002 ppm에서 2015년 0.005 ppm으로, NO₂는 2006년 0.004 ppm에서 2015년 0.010 ppm으로 증가할 것으로 예측되었다. 이에 대기오염물질을 저감하기 위한 실천방안과 석조문화재를 환경오염물질 및 기타 화학적, 물리적, 생물학적 요인으로 부터 보호하기 위한 실천관리 프로그램이 적극적으로 도입되어야 할 시점으로 사료된다. The amount of pollutants from stationary sources of businesses classified into 1-3 type in Gyeongju was found to be 0.70 ton/yr for PM-10, 13.95 ton/yr for SO₂, and 37.12 ton/yr for NOx ; with respect to area sources, 1.02 ton/yr for PM-10, 13.44 ton/yr for SO₂, and 21.10 ton/yr for NOx ; and with respect to mobile sources 963.91 ton/yr for PM-10, 1415.02 ton/yr for SO₂, and 5612.70 ton/yr for NOx. This study surveyed the concentration distribution of PM-10, SO₂, and NO₂ in the air in around Gyeongju and Pohang, and found that high concentration was mainly distributed around Pohang Steel Industrial Complex and the around of mobile sources. In Gyeongju area, SO₂ was predicted to increase from 0.002 ppm in 2006 to 0.005 ppm in 2015, and that of NO₂ was predicted to increase from 0.004 ppm to 0.010 ppm during the same period. At this point, practicing guidelines to reduce air pollutants and management plan for environmental pollutants should be devised, and also practicing and management programs to protect the stone cultural properties from environmental pollutants and other chemical, physical, and biological factors should be actively introduced.

전산유체역학을 이용한 흄후드 제어유속 개선(I)

정종현(Jung, Jong-Hyeon),이상운(Lee, Sang-Woon),이상만(Lee, Sang-Man),손병현(Shon Byung-Hyun),이정희(Lee, Jung-He),정유진(Jung, Yu-Jin) 한국산학기술학회 2013 한국산학기술학회논문지 Vol.14 No.2

본 연구에서는 전산유체역학(CFD)를 이용하여 흄후드(fume hood)의 기류 유입특성 및 유속 분포를 평가하였 다. 또한, 후드 개구면을 균일류 형성에 필요한 구조로 개선하였을 경우의 유동 특성을 예측하여 개선 효과를 검증하 였다. 기존의 흄후드의 제어유속을 평가한 결과, 제곱평균(RMS)값과 비교했을 때 최대 23~30%의 편차가 있음을 확 인하였다. 또한, 후드의 상부 유속이 하부 유속보다 58~68% 정도 빠른 것으로 나타나 후드 개구면에서의 유속 불균 형이 매우 심한 것으로 평가되었다. 이에 후드 개구면에서의 균일한 배기흐름을 유지하기 위해 후드를 개선(안쪽벽에 배플 설치 및 슬롯 타입의 개구부 설계)한 결과, RMS값 대비 최대 7%의 편차를 보였으며 구간별 유속 편차는 최대 12% 정도로 예측되어 기존 구조에 비해 제어유속의 불균형이 많이 해소되는 것을 확인할 수 있었다. This study used Computational Fluid Dynamics(CFD) to assess the properties of the air current inflow and the flow velocity distribution in the fume hood. In order to verify the effect of improvement, it was also predicted the characteristics of the flow pattern in case the hood face is structurally improved. The assessment of the capture velocity with the existing fume hood confirmed maximum 23 to 30% difference as compared to the root mean square (RMS). And the hood face showed great difference in flow velocity, with the flow velocity in the upper part is 58 to 68% faster than that in the lower part of the hood. So, as a result of the improvement of the hood designed to maintain a steady exhaust at the hood face (that is, installing a baffle on the inner wall and designing the slot type face), a difference of maximum 7% as compared to RMS appeared while maximum 12% differentiation in flow velocity through sections was predicted, showing mitigation of much of the difference in control velocity as compared to the previous structure.

경주 주변지역 대기오염물질의 보건·환경 위해성 평가(I)

정종현(Jung, Jong-Hyeon),최원준(Choi, Won-Joon),임헌호(Leem, Heon-Ho),박동소(Park, Tong-So),손병현(Shon Byung-Hyun) 한국산학기술학회 2009 한국산학기술학회논문지 Vol.10 No.12

경주 주변지역 시민들의 건강을 보호하고 보건·환경위해성 평가의 기초자료를 확보하기 위하여 기상학적 요소의 분포특성을 조사하고 RAMS 모델을 이용한 대기 유동장 수치모의를 수행하였다. 또한 대기오염물질 측정 및 분석과 ISC-AERMOD view를 이용한 대기오염물질의 거동을 예측하였으며 대기오염물질 관리를 통한 보건학적 피해 및 재산상의 피해를 예방하기 위한 보건·환경위해성 영향지역을 구분하였다. 경주 및 주변지역의 대기오염도를 조사 한 결과 연평균 대기환경기준물질의 농도는 포항, 울산지역에 비해 약간 낮았으나 경주역 광장과 경주 용강사거리의 경우 미세먼지와 이산화질소 농도가 포항 및 울산지역 평균농도보다 높게 나타나는 경우도 발생하였다. 시민들의 건 강에 영향을 미치는 대기오염물질의 이동 및 확산에 관한 모델링을 수행한 결과, 포항 철강공단지역은 POSCO와 함 께 1공단과 2공단 및 3공단과 4공단 일부 지역이 미세먼지와 아황산가스 영향지역에 포함되었으며, 포항남구 해도동, 상대동, 제철동, 장흥동 등은 철강공업 및 대규모의 산업시설이 밀집되어 있어 다량의 대기오염물질이 배출되어 국지 적인 대기환경질을 악화시키고 있는 것으로 나타났다. To protect the citizens' health of Gyeongju and to secure basic data for the assessment of health and environmental risk, distribution characteristics of meteorological elements were investigated and numerical simulation of wind field using RAMS model was carried out. In addition, measurement and analysis of air pollutants, forecasting the behavior air pollutants using ISC-AEROMOD view, and health and environmental risk-influenced zones were defined through managing air polluting materials to prevent health damage and property damage. According to the survey results of air pollution in Gyeongju and surroundings, average annual concentration of air pollutants in Gyeongju was slightly lower than that in Pohang and Ulsan areas, but concentration of particulate matters and nitrogen dioxide at Gyeongju Station Square and Yonggang Crossing were sometimes higher than that in Pohang and Ulsan areas. Results of the modeling of moving and diffusion of air pollutants that affect citizens' health showed that parts of the 1st through 4th industrial complexes together with POSCO were included in particulate matters and sulfur dioxide influenced areas in Pohang Steel Complex area, and that Haedo-dong, Sangdae-dong, Jecheol-dong and Jangheung-dong in Pohangnam-gu represented locally worsened air quality due to a quantity of air pollutant emission from dense steel industries and large scale industrial facilities.

국내산 석회석을 이용한 배연탈황/탈질 흡수제 및 반응특성

정종현(Jeong Jong Hyeon),유경선(Yu Gyeong Seon),손병현(Son Byeong Hyeon),이재정(Lee Jae Jeong),이형근(Lee Hyeong Geun),오광중(O Gwang Jung) 大韓環境工學會 2003 대한환경공학회지 Vol.25 No.9

BIM 기반 철골부재 단면설계를 위한 IDM 개발

정종현(Jung, Jong-Hyeon),이재철(Lee, Jae-Cheol) 한국산학기술학회 2015 한국산학기술학회논문지 Vol.16 No.2

IDM은 건설 프로젝트를 담당하는 각 전문분야의 업무 프로세스를 대상으로 정보교환의 시기 및 내용, 관련되는 IFC 객체 등을 정의하기 위한 개방형 정보전달 매뉴얼이다. 본 연구에서는 IDM 방법론을 통해 요구정보의 세부 정의 및 후속 프로세스로의 전달방법을 분석함으로써 BIM을 기반으로 철골부재의 단면설계를 수행하기 위한 정보모델을 정의하였 다. 또한 현재 IFC에서 지원하는 구조정보를 분석하고 엑셀을 이용한 사례적용을 통해 그 타당성을 검증하였다. 분석 결과, BIM 기반 철골부재 단면설계를 위한 대부분의 구조정보는 현재 통용되고 있는 IFC2×3에서 지원하는 엔터티와 Pset을 활용 해 관리가 가능하였으며, IFC2×3에서 지원하지 않는 소성단면계수 등 일부 정보는 IFC4에 보완돼 있음을 확인하였다. 이와 같이 IDM 방법론은 BIM 기반 철골부재의 단면설계를 위한 프로세스 분석 및 교환정보의 구체화, 공통적 기능단위 정보의 정의에 효과적으로 활용할 수 있었다. IDM is a methodology for capturing and specifying processes and information flow during the life-cycle of a facility. The methodology can be used to document existing or new processes, and describe the associated information that need to be exchanged between parties. In this paper, the information model for BIM-based structural steel member design was defined using IDM methodology. The structural information offered in IFC was analyzed, and its adequacy was verified by applying the case study using Excel. As a result, IFC2×3 offers the most structural design information for BIM-based structural steel member design, and some sectional properties omitted in IFC2×3 were offered in IFC4. IDM methodology can be used effectively for developing BIM-based structural design systems